EN 13169:2008

Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification

This European Standard specifies the requirements for factory made products of expanded perlite, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or multi layered insulation.
This European Standard also covers composite insulation boards (see Annex D).
This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this European Standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.
This European Standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non conflicting standards.
Products with a declared thermal resistance lower than 0,20 m2K/W or a declared thermal conductivity greater than 0,070 W/(mK) at 10 °C are not covered by this European Standard.
This European Standard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations. This European Standard does not cover the following acoustical aspects: Acoustic absorption index and direct airborne sound insulation.

Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Blähperlit (EPB) - Spezifikation

Diese Europäische Norm legt die Anforderungen für werkmäßig hergestellte Produkte aus Blähperlit mit oder ohne Kaschierung fest, die für die Wärmedämmung von Gebäuden benutzt werden. Die Produkte werden in der Form von Platten oder mehrlagigen Dämmplatten hergestellt.
Diese Europäische Norm umfasst auch Mehrschicht Dämmplatten (siehe Anhang D).
Diese Europäische Norm beschreibt die Stoffeigenschaften und enthält die Prüfverfahren und Festlegungen für die Konformitätsbewertung, die Kennzeichnung und die Etikettierung.
In dieser Europäischen Norm beschriebene Produkte werden auch in vorgefertigten Wärmedämmsystemen und Mehrschicht Verbundplatten angewendet; die Eigenschaften von Systemen, in die diese Produkte integriert sind, werden nicht behandelt.
Diese Europäische Norm legt keine Anforderungsniveaus für eine vorgegebene Eigenschaft fest, die ein Produkt erreichen muss, um für einen bestimmten Anwendungsfall tauglich zu sein. Für bestimmte Anwendungen benötigte Anforderungen können Regelwerken oder übereinstimmenden Normen entnommen werden.
Diese Europäische Norm gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes kleiner ist als 0,20 m2  K/W oder deren Nennwert der Wärmeleitfähigkeit größer ist als 0,070 W/(m  K) bei 10 °C.
Diese Europäische Norm gilt nicht für Ortsprodukte und für Produkte, die zur Dämmung von haustechnischen oder betriebstechnischen Anlagen bestimmt sind. Diese Norm gilt nicht für die folgenden Schallschutzaspekte: Schallabsorptionsgrad und direkte Luftschalldämmung.

Produits isolants thermiques pour le bâtiment - Produits manufacturés en perlite expansée (EPB) - Spécification

La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les produits manufacturés en perlite expansée, avec ou sans parements ou enduits, utilisés pour l’isolation thermique des bâtiments. Les produits sont fabriqués sous forme de panneaux ou d’isolation multicouche.
La présente norme concerne également les panneaux d’isolation composite (voir Annexe D).
La présente norme décrit les caractéristiques du produit et inclut les procédures d’essai, d’évaluation de la conformité, de marquage et d’étiquetage.
Les produits du domaine d'application de la présente norme sont également utilisés dans des systèmes d’isolation thermique et dans des panneaux composites préfabriqués; la performance des systèmes dans lesquels entrent ces produits n’est pas définie.
La présente norme ne spécifie pas, pour une propriété donnée, le niveau exigé que doit atteindre un produit pour démontrer son aptitude à l’emploi dans une application particulière. Les niveaux requis pour une application donnée figurent dans les réglementations, ou normes non conflictuelles.
Les produits dont la résistance thermique déclarée à une température de 10 °C est inférieure à 0,20 m2 .K/W ou dont la conductivité thermique déclarée à une température de 10 °C est supérieure à 0,070 W/(mK) ne sont pas du domaine d'application de la présente norme.
Les produits mis en œuvre in situ et ceux destinés à être utilisés pour l’isolation des équipements du bâtiment et des installations industrielles ne sont pas du domaine d'application de la présente norme. La présente norme ne couvre pas l'indice d'affaiblissement acoustique ni l’isolement aux bruits aériens directs.

Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega perlita (EPB) - Specifikacija

General Information

• Status: Withdrawn
• Publication Date: 25-Nov-2008
• Withdrawal Date: 27-Nov-2012
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88 - Thermal insulating materials and products
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Nov-2012
• Completion Date: 28-Nov-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: SIST EN 13169:2009 - Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification

Relations

• Replaces: EN 13169:2001/A1:2004 - Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
• Effective Date: 22-Dec-2008
• Replaces: EN 13169:2001 - Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
• Effective Date: 22-Dec-2008
• Replaces: EN 13169:2001/AC:2005 - Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
• Effective Date: 22-Dec-2008
• Replaced By: EN 13169:2012 - Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega perlita (EPB) - SpecifikacijaWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Blähperlit (EPB) - SpezifikationProduits isolants thermiques pour le bâtiment - Produits manufacturés en perlite expansée (EPB) - SpécificationThermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13169:2008SIST EN 13169:2009en,fr,de01-februar-2009SIST EN 13169:2009SLOVENSKI
STANDARDSIST EN 13169:2002/AC:2006SIST EN 13169:2002/A1:2004SIST EN 13169:20021DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13169November 2008ICS 91.100.60Supersedes EN 13169:2001
English VersionThermal insulation products for buildings - Factory madeproducts of expanded perlite (EPB) - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en perlite expansée (EPB) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus Blähperlit (EPB) - SpezifikationThis European Standard was approved by CEN on 18 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13169:2008: ESIST EN 13169:2009

Determination of the declared values of thermal resistance and
thermal conductivity . 22 Annex B (normative)
Factory production control . 24 Annex C (normative)
Determination of the thermal conductivity in relation to moisture content . 27 Annex D (normative)
Composite insulation boards . 29 Annex E (informative)
Additional properties . 35 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 37 Bibliography . 45
Tables Table 1 — Thickness tolerances . 12 Table 2 — Levels for compressive stress or compressive strength . 14 Table 3 — Levels for deformation under specified compressive load and temperature . 14 Table 4 — Levels for water absorption by total immersion. 15 Table 5 — Levels for bending strength at constant span. 15 Table 6 — Test methods, test specimens and conditions. 19 Table A.1 — Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 23 Table B.1 — Minimum product testing frequencies . 24 Table B.2 — Minimum product testing frequencies for the reaction to fire characteristics . 25 Table D.1 — Classes for thickness tolerances . 30 Table D.2 — Levels of compressibility . 30 Table D.3 — Test methods, test specimens and conditions . 32 Table D.4 — Minimum product testing frequencies . 33 Table E.1 — Test methods, test specimens, conditions and testing frequencies . 36 Table ZA.1 — Relevant clauses for expanded perlite and intended use . 38 SIST EN 13169:2009

Figures Figure C.1 — Example of a graphic representation of “a”
(a = 0,04/0,037 = 1,08 in this example) . 28 Figure ZA.1 — Example CE marking information . 44
EN 822, Thermal insulating products for building applications — Determination of length and width EN 823, Thermal insulating products for building applications — Determination of thickness EN 824, Thermal insulating products for building applications — Determination of squareness EN 825, Thermal insulating products for building applications — Determination of flatness EN 826, Thermal insulating products for building applications — Determination of compression behaviour EN 1602, Thermal insulating products for building applications — Determination of the apparent density
EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications — Determination of compressive creep EN 1607, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces EN 1609, Thermal insulating products for building applications — Determination of short term water absorption by partial immersion SIST EN 13169:2009
...