prEN 1337-8
(Main)Structural bearings - Part 8: Guide bearings and Restraint bearings
Structural bearings - Part 8: Guide bearings and Restraint bearings
This document specifies rules for the design, testing and manufacture of guide bearings and restraint bearings. It is applicable to bearings, which transmit loads in x- and y-plane according to prEN 1337-1:2018 only.
This document will be used in conjunction with the relevant parts of the prEN 1337 series.
Lager im Bauwesen - Teil 87: Führungslager und Festhaltekonstruktionen
Dieses Dokument legt Regeln für die Bemessung, Prüfung und Herstellung von Führungslagern und Festhaltekonstruktionen fest. Das Dokument gilt nur für Lager, die Lasten in der x- und y-Ebene nach prEN 1337-1:2018 übertragen.
Dieses Dokument wird in Kombination mit den relevanten Teilen der Normenreihe prEN 1337 verwendet.
Appareils d’appui structuraux - Partie 8 : Appareils d’appui guidés et appareils d’appui bloqués
Le présent document spécifie les règles de conception, d’essai et de fabrication d’appareils d’appui guidés et d’appareils d’appui bloqués. Il s’applique aux appareils d’appui qui transmettent les charges dans les plans x et y selon la norme provisoire prEN 1337-1:2018 uniquement.
Ce document sera utilisé conjointement aux parties pertinentes de la série prEN 1337.
Konstrukcijska ležišča - 8. del: Vodila za ležišča in pritrjene konstrukcije
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 1337-8:2018
01-marec-2018
.RQVWUXNFLMVNDOHåLãþDGHO9RGLOD]DOHåLãþDLQSULWUMHQHNRQVWUXNFLMH
Structural bearings - Part 8: Guide bearings and Restraint bearings
Lager im Bauwesen - Teil 87: Führungslager und Festhaltekonstruktionen
Ta slovenski standard je istoveten z: prEN 1337-8
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
oSIST prEN 1337-8:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1337-8:2018
---------------------- Page: 2 ----------------------
oSIST prEN 1337-8:2018
DRAFT
EUROPEAN STANDARD
prEN 1337-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2018
ICS 91.010.30 Will supersede EN 1337-8:2007
English Version
Structural bearings - Part 8: Guide bearings and Restraint
bearings
Lager im Bauwesen - Teil 87: Führungslager und
Festhaltekonstruktionen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 167.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1337-8:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1337-8:2018
prEN 1337-8:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Types of restraint and guide bearings . 5
4.1 Restraint bearing . 5
4.2 Guide bearings . 5
5 Material Properties . 6
6 Design . 6
7 Testing . 7
8 Manufacturing, assembly and tolerances . 7
9 Transport, storage and installation . 7
10 In-service inspection .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.