Building hardware - Mechatronic padlocks - Requirements and test methods

This European Standard specifies requirements for performance and testing of mechatronic padlocks (MPs) and their keys and/or electronic keys.
It establishes categories of use based on performance tests and grades of security based on design requirements and on performance tests that simulate attack.  If the design incorporates mechanical security means in addition to the mechatronic means, these are also tested.
This European Standard does not cover any other element of a security system, other than those directly involved in the control of a padlock.  
This European Standard does not cover the physical testing of multi-function devices such as Smartphones that may be used as part of the control system.

Schlösser und Baubeschläge - Mechatronische Hangschlösser - Anforderungen und Prüfverfahren

Diese Europäische Norm legt Anforderungen an die Leistung und Prüfung von mechatronischen Hangschlössern (MH) und deren Schlüsseln und/oder elektronischen Schlüsseln fest.
Sie legt auf Leistungsprüfungen basierende Gebrauchsklassen sowie Sicherheitsklassen fest, die auf Konstruktionsanforderungen und Leistungsprüfungen beruhen, die Angriffe simulieren. Sofern die Konstruktion zusätzlich zu den mechatronischen Vorrichtungen mechanische Schutzvorrichtungen enthält, werden auch diese geprüft.
Die vorliegende Europäische Norm behandelt keine weiteren Elemente eines Sicherheitssystems als die¬jenigen, die unmittelbar mit der Bedienung eines Hangschlosses verbunden sind.
Diese Europäische Norm deckt nicht die physikalische Prüfung von Multifunktionsgeräten wie z. B. Smartphones ab, die als Teil des Kontrollsystems genutzt werden können.

Quincaillerie pour le bâtiment - Cadenas mécatroniques - Exigences et méthodes d'essai

La présente Norme européenne spécifie les exigences de performance et d'essai des cadenas mécaniques (MP) et de leurs clés et/ou de leurs clés électroniques.
Elle définit des catégories d'utilisation basées sur des essais de performance et des niveaux de sécurité basés sur des exigences de conception et sur des essais de performance simulant une effraction. Si la conception intègre des dispositifs de sécurité mécanique, en complément de dispositifs mécatroniques, ces dispositifs sont également soumis à essai.
La présente Norme européenne ne couvre aucun élément d’un système de sécurité autre que ceux directement mis en jeu dans la manoeuvre d’un cadenas.
La présente Norme européenne ne traite pas de l'essai physique des dispositifs multi-fonctionnels tels que les smartphones, qui peuvent être utilisés comme éléments du système de contrôle.

Stavbno okovje - Mehatronske obešanke - Zahteve in preskusne metode

Ta evropski standard določa zahteve za delovanje in preskušanje mehatronskih obešank (MP) ter njihovih ključev in/ali elektronskih ključev.
Določa kategorije uporabe na podlagi preskusov delovanja in varnostne stopnje na podlagi zahtev glede zasnove in preskusov delovanja, ki simulirajo napad.  Če načrtovanje poleg mehatronskih sredstev zajema tudi mehanska varnostna sredstva, se te tudi preskusi.
Ta evropski standard ne zajema drugih elementov varnostnega sistema, ki niso neposredno vključeni v nadzor obešanke.  
Ta evropski standard ne zajema fizičnega preskušanja večfunkcijskih naprav, kot so pametni

General Information

Status
Published
Publication Date
19-Sep-2017
Withdrawal Date
30-Mar-2018
Current Stage

Buy Standard

Standard
EN 16864:2017 - BARVE
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 16864:2015
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stavbno okovje - Mehatronske obešanke - Zahteve in preskusne metodeSchlösser und Baubeschläge - Mechatronische Hangschlösser - Anforderungen und PrüfverfahrenQuincaillerie du bâtiment - Cadenas mécatroniques - Exigences et méthodes d'essaiBuilding hardware - Mechatronic padlocks - Requirements and test methods91.190Stavbna opremaBuilding accessoriesICS:Ta slovenski standard je istoveten z:EN 16864:2017SIST EN 16864:2017en,fr,de01-november-2017SIST EN 16864:2017SLOVENSKI
STANDARD



SIST EN 16864:2017



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16864
September
t r s y ICS
{ sä s { r English Version
Building hardware æ Mechatronic padlocks æ Requirements and test methods Quincaillerie pour le bâtiment æ Cadenas mécatroniques æ Exigences et méthodes d 5essai
Schlösser und Baubeschläge æ Mechatronische Hangschlösser æ Anforderungen und Prüfverfahren This European Standard was approved by CEN on
s s May
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z x vã t r s y ESIST EN 16864:2017



EN 16864:2017 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms, definitions and symbols . 7 4 Requirements . 10 Table 1 — Bump and vibration requirements . 11 Table 2 — Environmental resistance MP . 12 Table 3 — Environmental resistance of electronic key for MP . 13 Table 4 — Mechanical codes. 13 Table 5 — Code attack resistance . 14 Table 6 — Audit trail and time zone . 14 Table 7 — Security requirements . 16 5 Testing, assessment and sampling methods . 18 Figure 1 — Drill test rig . 26 Figure 2 — Shackle twisting test . 27 Figure 3 — Extraction of plug. 28 Figure 4 — Torque test .
...

SLOVENSKI STANDARD
oSIST prEN 16864:2015
01-julij-2015
Stavbno okovje - Mehatronske obešanke - Zahteve in preskusne metode
Building hardware - Mechatronic padlocks - Requirements and test methods
Schlösser und Baubeschläge - Mechatronische Hangschlösser - Anforderungen und
Prüfverfahren
Quincaillerie du bâtiment - Cadenas mécatroniques - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 16864
ICS:
91.190 Stavbna oprema Building accessories
oSIST prEN 16864:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16864:2015

---------------------- Page: 2 ----------------------
oSIST prEN 16864:2015

EUROPEAN STANDARD
DRAFT
prEN 16864
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2015
ICS 91.190
English Version
Building hardware - Mechatronic padlocks - Requirements and
test methods
Quincaillerie du bâtiment - Cadenas mécatroniques - Schlösser und Baubeschläge - Mechatronische
Exigences et méthodes d'essai Hangschlösser - Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16864:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16864:2015
prEN 16864:2015 (E)
Contents Page
Foreword .6
Introduction .7
1 Scope .8
2 Normative references .8
3 Terms, definitions and symbols .9
3.1 Terms and definitions .9
3.2 Symbols . 11
4 Requirements . 11
4.1 General . 11
4.2 Category of use . 11
4.2.1 General . 11
4.2.2 Key strength . 11
4.2.3 Operation of release mechanism .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.