Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges

This part of EN 1514 specifies the dimensions and marking of spiral wound gaskets for use in conjunction with flat face and raised face flanges complying with the requirements of EN 1092-1 for PN 10, PN 16, PN 25, PN 40, PN 63, PN 100 and PN 160 and up to and including DN 1 000.
NOTE 1   Dimensions of other types of gaskets for use with flanges to EN 1092-1, EN 1092-2, EN 1092-3 and EN 1092 4 are given in EN 1514-1, EN 1514-3, EN 1514-4, EN 1514-6, EN 1514-7 and EN 1514-8.
NOTE 2   Annex A lists information to be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the manufacturer.

Flansche und ihre Verbindungen - Dichtungen für Flansche mit PN-Bezeichnung - Teil 2: Spiraldichtungen für Stahlflansche

Brides et leurs assemblages - Joints pour les brides désignées PN - Partie 2 : Joints spiralés pour utilisation avec des brides en acier

Prirobnice in prirobnični spoji - Tesnila za prirobnice z oznako PN - 2. del: Spiralna tesnila za jeklene prirobnice - Dopolnilo A1

General Information

Status
Not Published
Current Stage
5060 - Closure of Vote - Formal Approval
Due Date
29-Oct-2020
Completion Date
29-Oct-2020

RELATIONS

Buy Standard

Amendment
EN 1514-2:2014/oprA1:2019
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 1514-2:2014/oprA1:2019
01-november-2019

Prirobnice in prirobnični spoji - Tesnila za prirobnice z oznako PN - 2. del: Spiralna

tesnila za jeklene prirobnice - Dopolnilo A1

Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound

gaskets for use with steel flanges

Flansche und ihre Verbindungen - Dichtungen für Flansche mit PN-Bezeichnung - Teil 2:

Spiraldichtungen für Stahlflansche

Brides et leurs assemblages - Joints pour les brides désignées PN - Partie 2 : Joints

spiralés pour utilisation avec des brides en acier
Ta slovenski standard je istoveten z: EN 1514-2:2014/prA1:2019
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
23.040.80 Tesnila za cevne zveze Seals for pipe and hose
assemblies
SIST EN 1514-2:2014/oprA1:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1514-2:2014/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN 1514-2:2014/oprA1:2019
DRAFT
EUROPEAN STANDARD
EN 1514-2:2014
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2019
ICS 23.040.80
English Version
Flanges and their joints - Gaskets for PN-designated
flanges - Part 2: Spiral wound gaskets for use with steel
flanges

Brides et leurs assemblages - Joints pour les brides Flansche und ihre Verbindungen - Dichtungen für

désignées PN - Partie 2 : Joints spiralés pour utilisation Flansche mit PN-Bezeichnung - Teil 2:

avec des brides en acier Spiraldichtungen für Stahlflansche

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 74.

This draft amendment A1, if approved, will modify the European Standard EN 1514-2:2014. If this draft becomes an amendment,

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.