EN 16602-70-28:2014

Space product assurance - Repair and modification of printed circuit board assemblies for space use

The requirements and procedures for repair and modification detailed in this Standard are designed to maintain the rigorous standards set
by the customer for the manufacture and assembly of space-quality printed circuit boards.
This Standard is confined to the repair and modification of single­sided, double­sided and multi­layer printed circuit board assemblies.
This Standard does not address the potential need for rework resulting from a repair or modification and unassembled (bare) printed
circuits boards.
This standard may be tailored for the specific characteristics and constraints of a space project, in conformance with ECSS-S-ST-00.

Raumfahrtproduktsicherung - Reparatur und Modifikation von Leiterplatten-Baugruppen für den Einsatz im Weltraum

Assurance produit des projets spatiaux - Réparation et modification des ensembles de circuits imprimés pour utilisation spatiale

Zagotavljanje varnih proizvodov v vesoljski tehniki - Popravilo in spreminjanje plošč tiskanih vezij za vesoljsko uporabo

Zahteve in postopki za popravilo in spreminjanje iz tega standarda so namenjeni ohranjanju strogih standardov, ki jih določa odjemalec za proizvodnjo in sestavo plošč tiskanih vezij za vesoljsko uporabo. Ta standard je omejen na popravilo in spreminjanje enostranskih, dvostranskih in večslojnih plošč tiskanih vezij.  Ta standard ne obravnava potencialne potrebe po predelavi, ki izhaja iz popravila ali spreminjanja, ter nesestavljenih (praznih) plošč tiskanih vezij.  Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00.

General Information

• Status: Published
• Publication Date: 28-Oct-2014
• Withdrawal Date: 29-Apr-2015
• ICS: 49.140 - Space systems and operations
• Technical Committee: CEN/CLC/TC 5 - Space
• Drafting Committee: CEN/CLC/TC 5 - Space
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Jun-2020
• Completion Date: 03-Jun-2020
• Mandate: M/496 - Mandate addressed to CEN, CENELEC and ETSI to develop standardisation regarding space industry (Phase 3 of the process)
• Ref Project: SIST EN 16602-70-28:2015 - Space product assurance - Repair and modification of printed circuit board assemblies for space use

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16602-70-28:2015
01-januar-2015
=DJRWDYOMDQMHYDUQLKSURL]YRGRYYYHVROMVNLWHKQLNL3RSUDYLORLQVSUHPLQMDQMH
SORãþWLVNDQLKYH]LM]DYHVROMVNRXSRUDER
Space product assurance - Repair and modification of printed circuit board assemblies
for space use
Raumfahrtproduktsicherung - Reparatur und Modifikation von Leiterplatten-Baugruppen
für den Einsatz im Weltraum
Assurance produit des projets spatiaux - Réparation et modification des ensembles de
circuits imprimés pour utilisation spatiale
Ta slovenski standard je istoveten z: EN 16602-70-28:2014
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16602-70-28:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16602-70-28:2015

---------------------- Page: 2 ----------------------

SIST EN 16602-70-28:2015


EUROPEAN STANDARD
EN 16602-70-28

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 49.140

English version
Space product assurance - Repair and modification of printed
circuit board assemblies for space use
Assurance produit des projets spatiaux - Réparation et Raumfahrtproduktsicherung - Reparatur und Modifikation
modification des ensembles de circuits imprimés pour von Leiterplatten-Baugruppen für den Einsatz im Weltraum
utilisation spatiale
This European Standard was approved by CEN on 11 April 2014.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.






CEN-CENELEC Management Centre:
Avenue Marnix 17, B-1000 Brussels
© 2014 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN 16602-70-28:2014 E
worldwide for CEN national Members and for CENELEC
Members.

---------------------- Page: 3 ----------------------

SIST EN 16602-70-28:2015
EN 16602-70-28:2014 (E)
Table of contents
Foreword . 9
1 Scope . 10
2 Normative references . 11
3 Terms, definitions and abbreviated terms . 12
3.1 Terms from other standards . 12
3.2 Terms specific to the present standard . 12
3.3 Abbreviated terms. 13
4 Requirements . 14
4.1 Basic requirements . 14
4.1.1 Hazard, health and safety precautions . 14
4.1.2 Materials . 14
4.1.3 Facilities . 14
4.1.4 General . 14
4.2 Repairs . 15
4.2.1 Repair criteria . 15
4.2.2 Number of repairs .
...