EN ISO 15110:2017
(Main)Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
ISO 15110:2017 specifies a so-called acid dew and fog test (ADF test) as an accelerated laboratory test method for simulating, by the use of artificial acidic precipitation, the damaging effects of acidic atmospheric precipitation in association with UV radiation, neutral condensed precipitation, and changing temperature and humidity. This test method is intended to be used in evaluating, on the basis of relative performance rankings, the suitability of painted materials for use in outdoor environments with acidic precipitation. It is not intended to generate the same extent of damage or the same damage pattern as in outdoor weathering, but rather to give a ranking which is similar to that which would be obtained in outdoor weathering. The method produces damage which is more homogeneous, allows fewer specimens to be exposed (and hence more rapid testing) and enables evaluation of the exposed specimens to be carried out using methods which are more objective than visual assessment.
Beschichtungsstoffe - Künstliches Bewittern mit saurer Beanspruchung (ISO 15110:2017)
Diese Internationale Norm legt einen sogenannten Acid-Dew-and-Fog-Test (ADF-Test) als zeitraffendes Laborprüfverfahren zum Simulieren der schädigenden Wirkung saurer atmosphä¬rischer Niederschläge im Zusammenwirken mit UV-Strahlung, neutralen Niederschlägen und wechselnder Temperatur und relativer Luftfeuchte unter Verwendung eines künstlichen sauren Nieder¬schlages fest. Dieses Prüfverfahren ist geeignet, auf der Grundlage einer relativen Rangfolge eine Auswahl von Beschichtungen für den Einsatz in einer durch saure Niederschläge belasteten Umwelt zu erarbeiten. Der ADF-Test beabsichtigt nicht, gleiche Schädigungs¬größe und -muster wie bei der Bewitterung im Freien zu erzeugen, sondern eine ähnliche Rangfolge der Schädigung wie bei der Bewitterung im Freien zu ergeben. Das Verfahren ergibt eine gleichförmige Schädigung, erlaubt kleinere Probengrößen (und damit eine schnellere Durchführung) und ermöglicht im Gegensatz zur bisher üblichen subjektiven visuellen Beurteilung das Anwenden objektiver Beurteilungsverfahren.
Peintures et vernis - Vieillissement artificiel comportant un dépôt acide (ISO 15110:2017)
ISO 15110:2017 spécifie un essai dit à la rosée et au brouillard acides (essai ADF), une méthode d'essai accéléré en laboratoire qui simule, par l'utilisation de précipitations acides artificielles, la détérioration sous l'effet de précipitations atmosphériques acides combinées au rayonnement UV, à la condensation de précipitations neutres et à des variations de température et d'humidité. Cette méthode d'essai est destinée à évaluer l'aptitude à l'emploi de matériaux peints dans des environnements extérieurs comportant des précipitations acides en les classant selon leurs performances relatives. Son but n'est pas de reproduire des détériorations de même étendue ou le même mode de détérioration que dans le cas du vieillissement en extérieur, mais d'établir un classement analogue à celui qui serait obtenu dans des conditions de vieillissement en extérieur. La méthode provoque des détériorations plus homogènes et permet d'exposer un nombre moins important d'éprouvettes (et donc de réduire la durée des essais). Elle permet également d'évaluer les éprouvettes exposées à l'aide de méthodes plus objectives que l'examen visuel.
Barve in laki - Umetno vremensko staranje, vključno s kislimi padavinami (ISO 15110:2017)
Ta dokument določa tako imenovani preskus s kislinsko rositvijo in meglo (ADF), ki je pospešena laboratorijska preskusna metoda za simulacijo škodljivih vplivov kislih atmosferskih padavin v povezavi z ultravijoličnim sevanjem, nevtralnimi kondenziranimi padavinami ter spremenljivo temperaturo in vlažnostjo z uporabo umetnih kislih padavin. Ta preskusna metoda se uporablja pri vrednotenju ustreznosti barvanih materialov za uporabo v zunanjem okolju s kislimi padavinami na podlagi njihove relativne uspešnosti. Ni namenjena temu, da bi povzročila enak obseg poškodb ali enak vzorec poškodb kot pri zunanjem klimatskem preskušanju, ampak temu, da zagotovi razvrščanje, ki je podobno razvrščanju pri zunanjem klimatskem preskušanju. Metoda povzroči poškodbe, ki so bolj homogene, izpostavi manj vzorcev (zato je preskušanje hitrejše) in omogoča, da se vrednotenje izpostavljenih vzorcev opravi po metodah, ki so objektivnejše od vizualne ocene.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2017
1DGRPHãþD
SIST EN ISO 15110:2013
%DUYHLQODNL8PHWQRYUHPHQVNRVWDUDQMHYNOMXþQRVNLVOLPLSDGDYLQDPL,62
Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017)
Beschichtungsstoffe - Künstliches Bewittern mit saurer Beanspruchung (ISO
15110:2017)
Peintures et vernis - Vieillissement artificiel comportant un dépôt acide (ISO 15110:2017)
Ta slovenski standard je istoveten z: EN ISO 15110:2017
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15110
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2017
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 15110:2013
English Version
Paints and varnishes - Artificial weathering including
acidic deposition (ISO 15110:2017)
Peintures et vernis - Vieillissement artificiel Beschichtungsstoffe - Künstliches Bewittern mit saurer
comportant un dépôt acide (ISO 15110:2017) Beanspruchung (ISO 15110:2017)
This European Standard was approved by CEN on 1 July 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15110:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 15110:2017) has been prepared by Technical Committee ISO/TC 35 “Paints and
varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall
be withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15110:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15110:2017 has been approved by CEN as EN ISO 15110:2017 without any modification.
INTERNATIONAL ISO
STANDARD 15110
Second edition
2017-07
Paints and varnishes — Artificial
weathering including acidic
deposition
Peintures et vernis — Vieillissement artificiel comportant un dépôt
acide
Reference number
ISO 15110:2017(E)
©
ISO 2017
ISO 15110:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 15110:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
5.1 General . 2
5.2 Laboratory radiation sources . 2
5.3 Test chamber. . 2
5.4 Wetting system. . 2
5.5 Specimen holders. . 2
5.6 Black standard or black panel thermometer. . 3
5.7 Humidity sensor. . 3
5.8 Acid spray device. . 3
5.9 Radiometer. . 3
6 Solutions for artificial acidic deposition . 3
7 Test specimens. 3
7.1 General . 3
7.2 Specimen size . 3
7.3 Corrosion of the substrates . 4
7.4 Reference specimens . 4
8 Designation of test type . 4
9 Procedure. 4
9.1 General . 4
9.2 Wetting and relative humidity . 5
9.3 Acid spraying . 5
9.4 Weathering cycles . 5
9.5 Test duration . 7
9.6 Further weathering of specimens . 8
10 Assessment of results . 8
11 Precision . 8
11.1 General . 8
11.2 Repeatability . 8
12 Test report . 9
Annex A (informative) Background information .11
Bibliography .14
ISO 15110:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.