EN 13523-9:2022

Coil coated metals - Test methods - Part 9: Resistance to water immersion

This document specifies the procedure for determining the resistance to water immersion of an organic coating on a metallic substrate.
The test is applicable to all kinds of organic coatings, including metallics and embossed, textured, pearlescent and printed coatings. The results of the test give an indication of the resistance of the coil coated metal to water.
The method is not intended to reproduce any particular condition of condensation.

Bandbeschichtete Metalle - Prüfverfahren - Teil 9: Beständigkeit gegen Eintauchen in Wasser

Dieses Dokument legt das Verfahren zum Bestimmen der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat gegen Eintauchen in Wasser fest.
Die Prüfung ist auf alle Arten von organischen Beschichtungen anwendbar, einschließlich Metallic- und Struktur-Beschichtungen, geprägte und bedruckte Beschichtungen, Beschichtungen mit Perlglanzeffekt. Die Ergebnisse der Prüfung geben einen Hinweis auf die Beständigkeit des bandbeschichteten Metalls gegen Wasser.

Tôles prélaquées - Méthodes d’essai - Partie 9 : Résistance à l'immersion dans l’eau

Le présent document décrit le mode opératoire permettant de déterminer la résistance à l’immersion dans l’eau d’un revêtement organique appliqué sur un subjectile métallique.
Cet essai s’applique à tous les types de revêtements organiques, y compris les revêtements métallisés, embossés, texturés, nacrés et imprimés. Les résultats de l’essai permettent d’évaluer la résistance à l’eau de la tôle prélaquée.

Prevlečene kovine, ki se navijajo - Preskusne metode - 9. del: Odpornost proti vodi pri potapljanju

Ta del standarda EN 13523 opisuje postopek za določanje odpornosti proti vodi pri potapljanju organske prevleke na kovinski podlagi. Preskus se uporablja za vse vrste organskih prevlek, vključno s kovinsko in žigosano, teksturno, biserno in za tiskane prevleke. Rezultati preskusa podajo vrednost odpornosti prevlečene kovine, ki se navija, proti vodi pri potapljanju. Metoda ni namenjena poustvarjanju določenih pogojev kondenzacije.

General Information

• Status: Published
• Publication Date: 08-Feb-2022
• Withdrawal Date: 30-Aug-2022
• ICS: 25.220.60 - Organic coatings
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139/WG 9 - Testing of coil coated metals
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 09-Feb-2022
• Due Date: 09-Jun-2022
• Completion Date: 09-Feb-2022
• Ref Project: SIST EN 13523-9:2022 - Coil coated metals - Test methods - Part 9: Resistance to water immersion

Relations

• Replaces: EN 13523-9:2014 - Coil coated metals - Test methods - Part 9: Resistance to water immersion
• Effective Date: 25-Dec-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13523-9:2022
01-september-2022
Nadomešča:
SIST EN 13523-9:2014
Prevlečene kovine, ki se navijajo - Preskusne metode - 9. del: Odpornost proti vodi
pri potapljanju
Coil coated metals - Test methods - Part 9: Resistance to water immersion
Bandbeschichtete Metalle - Prüfverfahren - Teil 9: Beständigkeit gegen Eintauchen in
Wasser
Tôles prélaquées - Méthodes d'essai - Partie 9: Résistance à l'immersion dans l'eau
Ta slovenski standard je istoveten z: EN 13523-9:2022
ICS:
17.040.20 Lastnosti površin Properties of surfaces
25.220.60 Organske prevleke Organic coatings
SIST EN 13523-9:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13523-9:2022

---------------------- Page: 2 ----------------------
SIST EN 13523-9:2022


EN 13523-9
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2022
EUROPÄISCHE NORM
ICS 25.220.60 Supersedes EN 13523-9:2014
English Version

Coil coated metals - Test methods - Part 9: Resistance to
water immersion
Tôles prélaquées - Méthodes d'essai - Partie 9 : Bandbeschichtete Metalle - Prüfverfahren - Teil 9:
Résistance à l'immersion dans l'eau Beständigkeit gegen Eintauchen in Wasser
This European Standard was approved by CEN on 19 December 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13523-9:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13523-9:2022
EN 13523-9:2022 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 6
6 Materials . 6
7 Sampling . 6
8 Test panels . 6
9 Procedure. 6
9.1 Scribing of test panels and immersion . 6
9.2 Assessment . 7
9.2.1 General .
...