Determination of the elasticity of fabrics - Part 3: Narrow fabrics

This standard describes the test methods which can be used to measure the elasticity and related properties of narrow fabrics.  Two methods are itemised: one for the purpose of product quality assurance (method A), and the other for product performance when in use (method B).

Bestimmung der Elastizität von Flächengebilden - Teil 3: Schmaltextilien

Diese Norm beschreibt die Prüfverfahren, die zur Messung der Elastizität und zugehöriger Eigenschaften von Schmaltextilien verwendet werden können. Zwei Verfahren werden genannt, von denen das eine (Verfahren A) der Sicherung der Produktqualität und das andere (Verfahren B) den Gebrauchseigenschaften des Produktes dient.

Détermination de l'élasticité des étoffes - Partie 3 : Etoffes étroites

La présente norme décrit des méthodes d'essai qui peuvent être utilisées pour mesurer l'élasticité et les propriétés afférentes des étoffes étroites. Deux méthodes sont décrites, l'une à destination de l'assurance qualité du produit (méthode A), l'autre à la performance du produit en conditions d'utilisation (méthode B).

Ugotavljanje elastičnosti ploskovnih tekstilij - 3. del: Ozki trakovi

General Information

Publication Date
Withdrawal Date
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date


Buy Standard

EN 14704-3:2007
English language
17 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Determination of the elasticity of fabrics - Part 3: Narrow fabricsNRYLDétermination de l'élasticité des étoffes - Partie 3 : Etoffes
étroitesBestimmung der Elastizität von Flächengebilden - Teil 3: SchmaltextilienTa slovenski standard je istoveten z:EN 14704-3:2006SIST EN 14704-3:2007en;fr;de59.080.30TkanineTextile fabricsICS:SLOVENSKI
STANDARDSIST EN 14704-3:200701-julij-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14704-3December 2006ICS 59.080.30 English VersionDetermination of the elasticity of fabrics - Part 3: Narrow fabricsDétermination de l'élasticité des étoffes - Partie 3 : Etoffes étroitesBestimmung der Elastizität von Flächengebilden - Teil 3:SchmaltextilienThis European Standard was approved by CEN on 28 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14704-3:2006: E

EN 14704-3:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.6 4.1 Method A.6 4.2 Method B.6 5 Sampling.6 6 Apparatus.6 6.1 CRE testing machine.6 6.2 Line clamps.7 6.3 Equipment, for cutting test specimens to the required dimensions.7 6.4 Calibrated metal rule, graduated in mm.7 7 Atmosphere for conditioning and testing.7 8 Preparation of test specimens.7 8.1 General.7 8.2 Test specimen preparation.7 9 Procedure.7 9.1 Method A.

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.