EN 13877-2:2013
(Main)Concrete pavements - Part 2: Functional requirements for concrete pavements
Concrete pavements - Part 2: Functional requirements for concrete pavements
This European Standard specifies requirements for concrete pavements cast in situ and compacted by vibration.
This European Standard also covers concrete sub-bases as well as concrete wearing courses on bridges.
This European Standard covers concrete pavements in motorways, airfields, pedestrian streets, cycle tracks, storage areas and, in general, all traffic-bearing structures.
Fahrbahnbefestigungen aus Beton - Teil 2: Funktionale Anforderungen an Fahrbahnbefestigungen aus Beton
Diese Europäische Norm legt Anforderungen an Fahrbahnbefestigungen aus Beton fest, die am Einbauort hergestellt und durch Vibration verdichtet werden.
Diese Europäische Norm gilt auch für Betontragschichten sowie für Fahrbahndecken von Brücken.
Diese Europäische Norm behandelt Fahrbahnbefestigungen aus Beton für Straßen, Flugplätze, Fußgängerwege, Fahrradwege, Lagerplätze und im Allgemeinen sämtliche verkehrsbelastete Befestigungen.
Chaussées en béton - Partie 2: Exigences fonctionnelles pour les chaussées en béton
Cette Norme européenne spécifie les exigences pour les chaussées en béton coulé en place et serré par vibration.
Cette Norme européenne couvre également les couches de fondation en béton ainsi que les couches de roulement en béton sur les ponts.
Cette Norme européenne concerne les chaussées en béton des routes, aéroports, rues piétonnes, pistes cyclables, zones de stockage et, en général, toutes les structures supportant une circulation.
Betonska vozišča - 2. del: Funkcionalne zahteve za betonska vozišča
Ta dokument opredeljuje zahteve za betonska vozišča, ulita na kraju samem in utrjena z vibriranjem. Vključuje tudi podosnovne betonske površine in betonske obrabne plasti vozne površine za mostove. V tem dokumentu so obravnavana betonska vozišča za avtoceste, vzletišča, površine za pešce, kolesarske poti, območja skladiščenja in na splošno vse strukture, po katerih poteka promet.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.þDFahrbahnbefestigungen aus Beton - Teil 2: Funktionale Anforderungen an Fahrbahnbefestigungen aus BetonChaussées en béton - Partie 2: Exigences fonctionnelles pour les chaussées en bétonConcrete pavements - Part 2: Functional requirements for concrete pavements93.080.20Materiali za gradnjo cestRoad construction materials91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 13877-2:2013SIST EN 13877-2:2013en,fr,de01-maj-2013SIST EN 13877-2:2013SLOVENSKI
STANDARDSIST EN 13877-2:20051DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13877-2
March 2013 ICS 93.080.20 Supersedes EN 13877-2:2004English Version
Concrete pavements - Part 2: Functional requirements for concrete pavements
Chaussées en béton - Partie 2: Exigences fonctionnelles pour les chaussées en béton
Fahrbahnbefestigungen aus Beton - Teil 2: Funktionale Anforderungen an Fahrbahnbefestigungen aus Beton This European Standard was approved by CEN on 10 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13877-2:2013: ESIST EN 13877-2:2013
Method of evaluating concrete core strength . 14 Annex B (normative)
Functional requirements for penetration in pavements with high risk of exposure to fuel, oil and other chemical liquids . 15 Bibliography . 16
also covers concrete sub-bases as well as concrete wearing courses on bridges. This European Standard covers concrete pavements in motorways, airfields, pedestrian streets, cycle tracks, storage areas and, in general, all traffic-bearing structures. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 206-1, Concrete — Part 1: Specification, performance, production and conformity EN 12350-1, Testing fresh concrete — Part 1: Sampling EN 12390-1, Testing hardened concrete — Part 1: Shape, dimensions and other requirements for specimens and moulds EN 12390-2, Testing hardened concrete — Part 2: Making and curing specimens for strength tests EN 12390-6, Testing hardened concrete — Part 6: Tensile splitting strength of test specimens EN 12390-7, Testing hardened concrete — Part 7: Density of hardened concrete EN 12390-8, Testing hardened concrete — Part 8: Depth of penetration of water under pressure CEN/TS 12390-9 , Testing hardened concrete — Part 9: Freeze-thaw resistance — Scaling EN 12504-1, Testing concrete in structures — Part 1: Cored specimens — Taking, examining and testing in compression EN 13863-1, Concrete pavements — Part 1: Test method for the determination of the thickness of a concrete pavement by survey method EN 13863-2, Concrete pavements — Part 2: Test method for the determination of the bond between two layers EN 13863-3, Concrete pavements — Part 3: Test methods for the determination of the thickness of a concrete pavement from cores EN 13863-4, Concrete pavements — Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres
EN 13877-1, Concrete pavements — Part 1: Materials EN 13877-3, Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements
base (CRCB) layer of continuously reinforced concrete, with a percentage of longitudinal crack control steel lower (about two thirds) than that generally used in continuously reinforced concrete pavements, and intended to be surfaced with a relatively thick (about 10 cm) overlay of bituminous mixture 3.1.8 contraction joint formed, sawn or tooled grooves in a concrete pavement to create a weakened plane and to control the location of cracking resulting from the dimensional change of the structure Note 1 to entry: It could be transverse or longitudinal. 3.1.9 expansion joint separation between pavement slabs filled with a compressible material SIST EN 13877-2:2013
the required bond strength, expressed in megapascals (MPa) sn the standard deviation; a value of 0,4 shall be used if sn < 0,4 4 Functional requirements for concrete pavements 4.1 General The appropriate functional requirements shall be specified. Jointed unreinforced concrete pavements shall not have large cracks impairing their bearing capacity. 4.2 Strength of concrete pavements 4.2.1 Gener
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.