EN ISO 16091:2002

Space systems - Integrated logistic support (ISO 16091:2002)

ISO 16091:2002 describes the set of management requirements needed to identify and provide logistic support, so the customer can operate and maintain a product in its operational environment for the expected lifetime.
These requirements also aim, throughout the product life cycle, at implementing everything pertinent to the control of the risks considered as critical regarding the operational objectives.
The management requirements are applicable to those activities necessary to design, develop, deliver, deploy and manage an organized and structured set of materials and software, services, processes and information dedicated to support the system throughout its life cycle.
ISO 16091:2002 specifies management, studies, production activities, information management processes and tasks to meet the customer's need for logistic support.
When viewed from the perspective of a specific programme or project context, the requirements defined in ISO 16091:2002 should be tailored to match the genuine requirements of a particular profile and circumstances of a programme or project.

Raumfahrtsysteme - Integrierte Logistische Unterstützung (ISO 16091:2002)

1.1 Allgemeines
Diese Europäische Norm beschreibt Anforderungen an das Management mit dem Ziel der Festlegung und Bereitstellung der Logistikunterstützung, um dem Kunden den Betrieb und die Instandhaltung eines Produkts unter gegebenen Betriebsbedingungen im Verlauf der geplanten Lebensdauer zu ermöglichen.
Diese Anforderungen sollen ebenfalls sicherstellen, dass während des Produktlebenszyklus' alle erforderlichen Maßnahmen zur Beherrschung der im Hinblick auf die Betriebsziele als kritisch angesehenen Risiken ergriffen werden.
Die Anforderungen gelten für Tätigkeiten, die hinsichtlich Design, Entwicklung, Bereitstellung, Einführung und das Management einer organisierten und strukturierten Gesamtheit von Material und Software, Dienstleistungen, Prozessen und Informationen zur Unterstützung des Systems während dessen gesamten Lebenszyklus' notwendig sind.
Diese Europäische Norm trifft Festlegungen zu Management, Untersuchungs-, Produktionsaktivitäten und Informationsmanagementprozessen um Wünsche des Kunden in Hinblick auf die logistische Unterstützung zu erfüllen.
1.2 Tailoring
Die in dieser Norm festgelegten Anforderungen sind programm- oder projektspezifisch anzupassen, d. h. auf das Anforderungsprofil und Betriebsbedingungen des einzelnen Programms bzw. Projekts abzustimmen.
ANMERKUNG   Tailoring ist ein Prozess, in dem einzelne Anforderungen in Spezifikationen, Normen und ähnlichen Dokumenten nach Bewertung für ein bestimmtes Projekt ausgewählt und in Ausnahmefällen auch modifiziert oder in dem neue Anforderungen ergänzt werden.

Systèmes spatiaux - Soutien logistique intégré (ISO 16091:2002)

L'ISO 16091:2002 décrit l'ensemble des exigences de management nécessaires à l'identification et à la fourniture d'un soutien logistique permettant au client d'exploiter et d'assurer la maintenance d'un produit dans son environnement opérationnel pendant la durée de vie prévue.
Ces exigences visent également, pendant le cycle de vie du produit, à la mise en oeuvre de tout ce qui est nécessaire à la maîtrise des risques considérés comme critiques au vu des objectifs opérationnels.
Ces exigences de management sont applicables aux activités nécessaires à la conception, au développement, à la livraison, au déploiement et à la gestion d'un ensemble organisé et structuré de matériels et logiciels, de services, de processus et d'informations dédié au soutien du système pendant tout son cycle de vie.
L'ISO 16091:2002 spécifie les activités de management, d'études et de production, les processus et les tâches de gestion des informations destinés à satisfaire les besoins du client en matière de soutien logistique.

Space systems - Integrated logistic support (ISO 16091:2002)

General Information

• Status: Published
• Publication Date: 30-Nov-2002
• Withdrawal Date: 29-Jun-2003
• ICS: 49.140 - Space systems and operations
• Technical Committee: CEN/SS T02 - Aerospace
• Drafting Committee: CEN/SS T02 - Aerospace
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Dec-2002
• Completion Date: 01-Dec-2002
• Mandate: M/237 - Mandate to CEN, CENELEC and ETSI for standardization in the field of equipment for the space industry
• Ref Project: SIST EN ISO 16091:2004 - Space systems - Integrated logistic support (ISO 16091:2002)

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2004
Space systems - Integrated logistic support (ISO 16091:2002)
Space systems - Integrated logistic support (ISO 16091:2002)
Raumfahrtsysteme - Integrierte Logistische Unterstützung (ISO 16091:2002)
Systemes spatiaux - Soutien logistique intégré (ISO 16091:2002)
Ta slovenski standard je istoveten z: EN ISO 16091:2002
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 16091
First edition
2002-12-01
Space systems — Integrated logistic
support
Systèmes spatiaux — Soutien logistique intégré

Reference number
ISO 16091:2002(E)
©
ISO 2002
ISO 16091:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved

ISO 16091:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16091 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical
Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 14, Space systems and operations, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Throughout the text of this document, read ".this European Standard." to mean ".this International Standard.".
ISO 16091:2002(E)
Contents
page
Foreword .vi
Introduction .vii
1 Scope .1
1.1 General.1
1.2 Tailoring.1
2 Normative references .1
3 Terms, definitions and abbreviated terms .1
3.1 Terms and definitions.1
3.2 Abbreviated terms .5
4 Fundamentals of integrated logistic support .6
4.1 Project context .6
4.2 ILS main concepts .7
4.2.1 Integration concept .7
4.2.2 Availability, supportability and human factors .7
4.2.3 Life cycle cost and operational risk .7
5 Management requirements for ILS .8
5.1 General .8
5.2 Control of logistic activities .9
5.2.1 Objectives and requirements .9
5.2.2 Control of risks .9
5.2.3 Concurrent development .9
5.2.4 Validation .9
5.2.5 Customer participation .9
5.2.6 Integration and synchronization .10
5.2.7 Work breakdown structure .10
5.2.8 Appropriate phasing.10
5.3 Logistic support.10
5.3.1 Customer summary .10
5.3.2 Supplier response.11
5.3.3 Strategy.11
5.4 Reports.11
5.4.1 Overall project report .11
5.4.2 Project review report .12
5.4.3 Lessons learned report .12
6 Management requirements for logistic support analysis.12
6.1 Control of logistic analyses.12
6.2 Study and validation of support requirements.12
6.2.1 General.12
6.2.2 Identification of logistic support elements .13
6.2.3 Assessment of resources .13
6.2.4 Technology impact .14
6.2.5 Evaluation of alternatives .14
6.2.6 Test, evaluation and validation.14
6.3 Requirements for LSA reports.14
7 Management requirements for support elements .15
7.1 General.15
7.2 Control of support element activities .15
7.3 Support element definition and development.15
iv © ISO 2002 – All rights reserved

ISO 16091:2002(E)
7.3.1 Operation and maintenance task identification.15
7.3.2 Customer defined location .16
7.3.3 Prediction of consumption .16
7.3.4 Support .16
7.3.5 Unexpected operational events.16
7.4 Management of the production of support elements.16
7.4.1 General.16
7.4.2 Re-use of equipment .17
7.4.3 Provisioning plan.17
7.4.4 Support equipment acquisition plan .17
7.4.5 Support facilities plan .18
7.4.6 Packaging, handling, storage and transportation plan .18
7.4.7 Software support plan.18
7.4.8 Technical assistance plan .18
7.4.9 Manpower allocation .18
7.4.10 Training plan .19
8 ILS requirements for information management .19
8.1 Integration of logistic support into overall information/documentation management .19
8.2 Data processing.
...