EN ISO 25619-2:2015

Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015)

ISO 25619-2:2015 specifies an index test method for determining the short-term compressive behaviour of geosynthetics. It can be used to determine the deformation behaviour under short-term compressive stress, e.g. after exposure to stress, liquids, or light.
ISO 25619-2. 2015 can be used for quality control purposes. It is not intended to be used for design purposes.

Geokunststoffe - Bestimmung des Druckverhaltens - Teil 2: Bestimmung des Kurzzeit-Druckverhaltens (ISO 25619-2:2015)

Géosynthétiques - Détermination du comportement en compression - Partie 2: Détermination du comportement à la compression à court terme (ISO 25619-2:2015)

La présente partie de l'ISO 25619 spécifie une méthode d'essai d'index permettant de déterminer le comportement à la compression à court terme des géosynthétiques. Elle peut être utilisée pour déterminer la déformation sous une contrainte de compression de courte durée, par exemple après exposition à une contrainte, à des liquides ou à la lumière.
La présente partie de l'ISO 25619 peut être utilisée à des fins de contrôle de la qualité. Elle n'est pas destinée à être utilisée pour le dimensionnement.

Geosintetika - Ugotavljanje obnašanja pri tlačni obremenitvi - 2. del: Ugotavljanje obnašanja pri kratkotrajni tlačni obremenitvi (ISO 25619-2:2015)

Ta del standarda ISO 25619 določa metodo preskušanja indeksa za ugotavljanje
obnašanja geosintetike pri kratkotrajni tlačni obremenitvi. Uporablja se lahko za določanje deformacijskega obnašanja pri kratkotrajni tlačni obremenitvi, npr. po izpostavljanju napetosti, tekočinam ali svetlobi. Ta del standarda ISO 25619 se lahko uporablja za nadzor kakovosti. Ni namenjen uporabi za namene projektiranja.

General Information

• Status: Published
• Publication Date: 08-Sep-2015
• Withdrawal Date: 30-Mar-2016
• ICS: 59.080.70 - Geotextiles
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189/WG 3 - Mechanical testing
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 09-Sep-2015
• Completion Date: 09-Sep-2015
• Ref Project: SIST EN ISO 25619-2:2015 - Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015)

Relations

• Replaces: EN ISO 25619-2:2008 - Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2008)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 25619-2:2015
01-november-2015
1DGRPHãþD
SIST EN ISO 25619-2:2009
*HRVLQWHWLND8JRWDYOMDQMHREQDãDQMDSULWODþQLREUHPHQLWYLGHO8JRWDYOMDQMH
REQDãDQMDSULNUDWNRWUDMQLWODþQLREUHPHQLWYL,62
Geosynthetics - Determination of compression behaviour - Part 2: Determination of short
-term compression behaviour (ISO 25619-2:2015)
Geokunststoffe - Bestimmung des Druckverhaltens - Teil 2: Bestimmung des Kurzzeit-
Druckverhaltens (ISO 25619-2:2015)
Géosynthétiques - Détermination du comportement en compression - Partie 2:
Détermination du comportement à la compression à court terme (ISO 25619-2:2015)
Ta slovenski standard je istoveten z: EN ISO 25619-2:2015
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN ISO 25619-2:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 25619-2:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 25619-2:2015


EN ISO 25619-2
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2015
EUROPÄISCHE NORM
ICS 59.080.70 Supersedes EN ISO 25619-2:2008
English Version

Geosynthetics - Determination of compression behaviour -
Part 2: Determination of short-term compression
behaviour (ISO 25619-2:2015)
Géosynthétiques - Détermination du comportement en Geokunststoffe - Bestimmung des Druckverhaltens -
compression - Partie 2: Détermination du Teil 2: Bestimmung des Kurzzeit-Druckverhaltens (ISO
comportement à la compression à court terme (ISO 25619-2:2015)
25619-2:2015)
This European Standard was approved by CEN on 8 August 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25619-2:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 25619-2:2015
EN ISO 25619-2:2015 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 25619-2:2015
EN ISO 25619-2:2015 (E)
European foreword
This document (EN ISO 25619-2:2015) has been prepared by Technical Committee ISO/TC 221
“Geosynthetics” in collaboration with Technical Committee CEN/TC 189 “Geosynthetics” the secretariat
of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall
be withdrawn at the latest by March 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 25619-2:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 25619-2:2015 has been approved by CEN as EN ISO 25619-2:2015 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 2
...