Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

This European Standard specifies equipment and procedures for determining the tensile bond strength of the adhesive and of the base coat to the thermal insulation material. It is applicable to External Thermal Insulation Composite Systems (ETICS).

Wärmedämmstoffe für das Bauwesen - Bestimmung der Haftzugfestigkeit zwischen Klebemasse/Klebemörtel und Wärmedämmstoff sowie zwischen Unterputz und Wärmedämmstoff

Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Haftzugfestigkeit zwischen Klebemasse/Klebemörtel (im Folgenden Klebschicht genannt) sowie zwischen Unterputz und Wärmedämmstoff fest.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination de l'adhérence par traction de la colle et de la couche de base sur le matériau d'isolation thermique

La présente Norme européenne prescrit l'équipement et les modes opératoires pour déterminer la résistance à la traction de la liaison de la colle et de la couche de base au matériau d'isolation thermique. Elle est applicable aux systèmes composites d'isolation thermique par l'extérieur (ETICS).

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje oprijema lepila in osnovnega nanosa na toplotnoizolacijski material

General Information

Status
Withdrawn
Publication Date
22-Oct-2002
Withdrawal Date
03-Sep-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
04-Sep-2019

Relations

Buy Standard

Standard
EN 13494:2003
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Ugotavljanje oprijema lepila in osnovnega nanosa na toplotnoizolacijski materialWärmedämmstoffe für das Bauwesen - Bestimmung der Haftzugfestigkeit zwischen Klebemasse/Klebemörtel und Wärmedämmstoff sowie zwischen Unterputz und WärmedämmstoffProduits isolants thermiques destinés aux applications du bâtiment - Détermination de l'adhérence par traction de la colle et de la couche de base sur le matériau d'isolation thermiqueThermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13494:2002SIST EN 13494:2003en01-december-2003SIST EN 13494:2003SLOVENSKI
STANDARD



SIST EN 13494:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13494October 2002ICS 91.100.60English versionThermal insulation products for building applications -Determination of the tensile bond strength of the adhesive andof the base coat to the thermal insulation materialProduits isolants thermiques destinés aux applications dubâtiment - Détermination de l'adhérence par traction de lacolle et de la couche de base sur le matériau d'isolationthermiqueWärmedämmstoffe für das Bauwesen - Bestimmung derHaftzugfestigkeit zwischen Klebemasse/Klebemörtel undWärmedämmstoff sowie zwischen Unterputz undWärmedämmstoffThis European Standard was approved by CEN on 12 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13494:2002 ESIST EN 13494:2003



EN 13494:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions, symbols and units.43.1Terms and definitions.43.2Symbols and units.44Principle.55Apparatus.55.1Glue.55.2Rigid plates.55.3Saw.55.4Tensile testing machine.56Test specimens.56.1Preparation of the samples.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.