EN ISO 19150-6:2023

Geographic information - Ontology - Part 6: Service ontology register (ISO 19150-6:2023)

This document establishes a standard registration and maintenance mechanism for the registration of ISO 19150-4-conformant geographic information service ontologies.
This document makes use of ISO 19135-1 whenever appropriate.
This document does not define semantics operators or rules for ontologies, and does not develop any application ontology.
In relation to ISO 19101-1:2014, 6.2, this document defines and formalizes the following purposes of the ISO geographic information reference model:
—     geographic information service components and their behaviour for data processing purposes over the Web; and
—     OWL ontologies to cast ISO/TC 211 International Standards to benefit from and support the Semantic Web.
In relation to ISO 19101-1:2014, 8.3, this document addresses the Application:Procedural foundation of the ISO geographic information reference model.

Geoinformation - Ontologie - Teil 6: Dienste-Ontologieregister (ISO 19150-6:2023)

Information géographique - Ontologie - Partie 6: Registre d’ontologies de service (ISO 19150-6:2023)

Le présent document définit un mécanisme normalisé d'enregistrement et de maintenance pour l'enregistrement d'ontologies de service d'information géographique conformes à l'ISO 19150-4.
Le présent document utilise l'ISO 19135-1 le cas échéant.
Le présent document ne définit pas les opérateurs sémantiques ni les règles des ontologies, et ne présente pas d'ontologie d'application.
Par rapport à l'ISO 19101-1:2014, 6.2, le présent document définit et formalise les objectifs suivants du modèle de référence de l'information géographique de l'ISO:
—     constituants de service d'information géographique et leur comportement à des fins de traitement de données sur le Web; et
—     ontologies OWL pour formuler les normes internationales ISO/TC 211 afin de bénéficier de, et prendre en charge, le Web sémantique.
Par rapport à l'ISO 19101-1:2014, 8.3, le présent document traite de la fondation Application:Procedural du modèle de référence de l'information géographique de l'ISO.

Geografske informacije - Ontologija - 6. del: Ontološki register storitev (ISO 19150-6:2023)

Ta dokument določa standardni mehanizem registracije in vzdrževanja za registracijo ontologij storitev geografskih informacij, skladnih s standardom ISO 19150-4.
Ta dokument uporablja standard ISO 19135-1, kadarkoli je to primerno.
Ta dokument ne določa operativnega pomenoslovja ali pravil za ontologije in ne oblikuje nobene ontologije uporabe.
Ta dokument v povezavi s standardom ISO 19101-1:2014, 6.2 določa in formalizira naslednje namene referenčnega modela geografskih informacij ISO:
– komponente storitev geografskih informacij in njihovo delovanje za namene obdelave podatkov prek spleta; ter – ontologije OWL za pretvorbo mednarodnih standardov ISO/TC 211 v korist in podporo semantičnemu spletu.
Ta dokument v povezavi s standardom ISO 19101-1:2014, 8.3 obravnava uporabo: postopkovno osnovo referenčnega modela geografskih informacij ISO.

General Information

• Status: Published
• Publication Date: 11-Jul-2023
• ICS: 35.240.70 - IT applications in science
• Technical Committee: CEN/TC 287 - Geographic Information
• Drafting Committee: CEN/TC 287 - Geographic Information
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 12-Jul-2023
• Due Date: 03-Jun-2024
• Completion Date: 12-Jul-2023
• Ref Project: SIST EN ISO 19150-6:2023 - Geographic information — Ontology — Part 6: Service ontology register (ISO 19150-6:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2023
Geografske informacije - Ontologija - 6. del: Ontološki register storitev (ISO 19150-
6:2023)
Geographic information — Ontology — Part 6: Service ontology register (ISO 19150-
6:2023)
Geoinformation - Ontologie - Teil 6: Dienste-Ontologieregistry (ISO 19150-6:2023)
Information géographique - Ontologie - Partie 6: Registre d’ontologies de service (ISO
19150-6:2023)
Ta slovenski standard je istoveten z: EN ISO 19150-6:2023
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19150-6
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2023
EUROPÄISCHE NORM
ICS 35.240.70
English Version
Geographic information - Ontology - Part 6: Service
ontology register (ISO 19150-6:2023)
Information géographique - Ontologie - Partie 6: Geoinformation - Ontologie - Teil 6: Dienste-
Registre d'ontologies de service (ISO 19150-6:2023) Ontologieregistry (ISO 19150-6:2023)
This European Standard was approved by CEN on 23 January 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19150-6:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 19150-6:2023) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19150-6:2023 has been approved by CEN as EN ISO 19150-6:2023 without any
modification.
INTERNATIONAL ISO
STANDARD 19150-6
First edition
2023-06
Geographic information —
Ontology —
Part 6:
Service ontology register
Information géographique — Ontologie —
Partie 6: Registre d’ontologies de service
Reference number
ISO 19150-6:2023(E)
ISO 19150-6:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 19150-6:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms and namespaces .2
4.1 Abbreviated terms . 2
4.2 Namespaces . 2
5 Conformance . 3
6 Register structure . 3
6.1 General . 3
6.2 Fundamental structure of the register . 3
6.3 Service ontology register . 4
6.3.1 Introduction . 4
6.3.2 Requirements . 5
6.3.3 Properties . 5
6.4 Service ontology register item class . 7
6.4.1 Introduction . 7
6.4.2 Requirements . 7
6.4.3 Properties . 7
6.5 Registered service ontology . 8
6.5.1 Introduction . 8
6.5.2 Requirements . 9
6.5.3 Properties . 9
7 Register implementation .11
7.1 General . 11
7.2 Item Class for registered service ontology .12
8 Service ontology register management .13
8.1 General .13
8.2 Roles and responsibilities . 14
8.2.1 Service ontology register owner . 14
8.2.2 Service ontology register manager . 14
8.2.3 Submitting organization . 14
8.2.4 Control body . 15
8.2.5 Registry manager .15
8.2.6 User. 15
8.3 Managing a service ontology register . 15
8.3.1 Establishing a service ontology register . 15
8.3.2 Status of a service ontology register item . 16
8.3.3 Process of proposal to the service ontology register . 17
8.3.4 Publication of the service ontology register . 18
Annex A (normative) Abstract test suite .19
Annex B (informative) Enabling registration of GeoWeb service ontologydescribed in
other frameworks .28
Bibliography .30
iii
ISO 19150-6:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards
...