EN 6059-303:2017

Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids

This European Standard specifies a method for determining the fluid resistance of protection sleeves for electrical cable and cable bundles for aerospace application.
It shall be used together with EN 6059-100.

Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche - Prüfverfahren - Teil 303: Beständigkeit gegen Flüssigkeiten

Diese Europäische Norm legt ein Verfahren zur Ermittlung der Flüssigkeitsbeständigkeit von Schutzschläu-chen für elektrische Leitungen und Kabelbündel für Anwendungen in der Luft- und Raumfahrt fest.
Die Norm ist zusammen mit EN 6059-100 anzuwenden.

Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes d'essais - Partie 303 : Résistance aux fluides

Aeronavtika - Električni kabli, namestitev - Zaščitne obojke - Preskusne metode - 303. del: Odpornost proti tekočinam

Ta evropski standard določa metodo za določanje odpornost proti tekočinam zaščitnih obojk za električne kable in snope kablov za uporabo v aeronavtiki.
Uporabljati ga je treba skupaj s standardom EN 6059-100.

General Information

• Status: Published
• Publication Date: 14-Nov-2017
• Withdrawal Date: 30-May-2018
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 8 - Installation Technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Nov-2017
• Completion Date: 15-Nov-2017
• Ref Project: SIST EN 6059-303:2018 - Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2018
$HURQDYWLND(OHNWULþQLNDEOLQDPHVWLWHY=DãþLWQHRERMNH3UHVNXVQHPHWRGH
GHO2GSRUQRVWSURWLWHNRþLQDP
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods -
Part 303: Resistance to fluids
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche -
Prüfverfahren - Teil 303: Beständigkeit gegen Flüssigkeiten
Série aérospatiale - Câbles électriques, installation - Gaines de protection - Méthodes
d'essais - Partie 303 : Résistance aux fluides
Ta slovenski standard je istoveten z: EN 6059-303:2017
ICS:
29.060.20 Kabli Cables
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 6059-303
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2017
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Electrical cables, installation -
Protection sleeves - Test methods - Part 303: Resistance to
fluids
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaines de protection - Méthodes d'essais - Partie 303 : Installation - Schutzschläuche - Prüfverfahren - Teil
Résistance aux fluides 303: Beständigkeit gegen Flüssigkeiten
This European Standard was approved by CEN on 28 August 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6059-303:2017 E
worldwide for CEN national Members.

Contents Pages
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Preparation of specimens . 5
4 Apparatus. 5
5 Method . 5
6 Test fluids . 5
7 Requirements . 8

European foreword
This document (EN 6059-303:2017) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this European
Standard has received the approval of the National Associations and the Official Services of the member
countries of ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be
withdrawn at the latest by May 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
1 Scope
This European Standa
...