EN 6049-001:2018
(Main)Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
This European Standard specifies the general characteristics, qualification and acceptance requirements
for protection sleeves in meta-aramid fibres for cable and cable bundles for aerospace application.
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 001: Technische Lieferbedingungen
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 001: Spécification technique
Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz metaaramidnih vlaken - 001. del: Tehnična specifikacija
Ta evropski standard določa splošne značilnosti ter zahteve glede kvalifikacije in sprejemljivosti za zaščitne obojke iz metaaramidnih vlaken za kable in snope kablov, ki se uporabljajo v aeronavtiki.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2018
1DGRPHãþD
SIST EN 6049-001:2015
$HURQDYWLND(OHNWULþQLNDEOLQDPHVWLWHY=DãþLWQDRERMNDL]PHWDDUDPLGQLK
YODNHQGHO 7HKQLþQDVSHFLILNDFLMD
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 001: Technical specification
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-
Aramidfasern - Teil 001: Technische Lieferbedingungen
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 001: Spécification technique
Ta slovenski standard je istoveten z: EN 6049-001:2018
ICS:
29.060.20 Kabli Cables
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 6049-001
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2018
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 6049-001:2015
English Version
Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 001:
Technical specification
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaine de protection en fibres méta-aramides - Partie Installation - Schutzschläuche aus Meta-Aramidfasern -
001: Spécification technique Teil 001: Technische Lieferbedingungen
This European Standard was approved by CEN on 18 January 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6049-001:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions and symbols . 6
4 Description . 7
5 Design . 10
6 Definition drawings and mass . 10
7 Test methods . 11
8 Quality assurance . 12
9 Example for designation in product standards . 14
10 Delivery conditions . 14
11 Packaging . 15
12 Marking . 15
13 Storage . 16
European foreword
This document (EN 6049-001:2018) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2019, and conflicting national standards shall
be withdrawn at the latest by February 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 6049-001:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This European Standard specifies the general characteristics, qualification and acceptance requirements
for protection sleeves in meta-aramid fibres for cable and cable bundles for aerospace application.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591-214, Aerospace series — Elements of electrical and optical connection — Test methods — Part 214:
Lightning strike, current and voltage pulse
EN 2591-307, Aerospace series — Elements of electrical and optical connection — Test methods — Part 307:
Salt mist
EN 2825, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating
heat and flames — Determination of smoke density
EN 2826, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating
heat and flames — Determination of gas components in the smoke
EN 3197, Aerospace series — Design and installation of aircraft electrical and optical interconnection systems
EN 3475-301, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 301: Ohmic
resistance per unit length
EN 3844-1, Aerospace series — Flammability of non metallic materials — Part 1: Small burner test,
vertical — Determination of the vertical flame propagation
EN 6049-003, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres —
Part 003: Braided, tubular, expandable — Product standard
EN 6049-004, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres —
1)
Part 004: Braided, tubular, high expandable — Product standard
EN 6049-005, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres —
Part 005: Sleeve flexible, post installation — Product standard
EN 6049-006, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres
Part 006: Self-wrapping protective sleeve, flexible post installation — Product standard
EN 6049-007, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres
Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating
temperature from – 55 °C to 260 °C — Product standard
EN 6049-008, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres
Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation
operating temperature from – 55 °C to 200 °C — Product standard
1) Published as ASD-STAN Prestandard at the date of publication of this European Standard (www.asd-stan.org).
EN 6049-009, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres
Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from – 55 °C
to 260 °C — Product standard
EN 6059-201, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 201: Visual inspection
EN 6059-202, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 202: Dimensions and mass
EN 6059-203, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 203: Coverage
EN 6059-301, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 301: Sun light exposure
EN 6059-302, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 302: High temperature exposure
EN 6059-303, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 303: Resistance to fluids
EN 6059-304, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 304: Flammability
EN 6059-305, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 305: Fluid absorption
EN 6059-306, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 306: Mould growth
EN 6059-308, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 308: Rapid change of temperature
EN 6059-309, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 309: Fire resistance when fitted on a cable bundle
EN 6059-401, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 401: Expansion range
EN 6059-402, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 402: Bending properties
EN 6059-403, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 403: Scrape abrasion
EN 6059-404, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 404: Tensile strength
EN 6059-405, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
1)
Part 405: Dynamic cut-through
EN 6059-406, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 406: Vibration
EN 6059-501, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 501: Voltage proof test
EN 6059-502, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 502: Resistance to electrical arcs
EN 6059-503, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 503: Temperature rise due to rated current injected on the sleeve
EN 6059-504, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve
EN 6059-601, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods
Part 601: Open and close
EN 9133, Aerospace series — Quality Management Systems — Qualification Procedure for Aerospace
Standard Products
ISO 8815, Aircraft — Electrical cables and cables harnesses — Vocabulary
IEC 60096-0-1, Radio frequency cables — Part 0: Guide to the design of detail specifications — Section 1:
Coaxial cables
3 Terms, definitions and symbols
For the purpose of this standard, the terms, definitions and symbols given in ISO 8815 and the following
apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
expandable sleeve
sleeve with a ratio ≤ 2 between the minimum diameter by stretching of the sleeve and the maximum
diameter by compressing the sleeve in longitudinal direction
3.2
high expandable sleeve
sleeve with a ratio > 2 between the minimum diameter by stretching of the sleeve and the maximum
diameter by compressing the sleeve in longitudinal direction
3.3
fibre
fibre or monofilament fibre or solid fibre which is a thin singular solid strand of plastic
3.4
multifilament fibre
a fibre consisting of a group of very thin parallel or twisted fibres
------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.