EN ISO 14323:2006

Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2006)

ISO 14323:2006 covers destructive testing of welds.
ISO 14323:2006 specifies specimen dimensions and testing procedures for impact shear and cross-tension testing of spot and embossed projection welds in overlapping sheets, in any metallic material of thickness 0,5 mm to 4 mm.

Widerstandspunkt- und Buckelschweißen - Zerstörende Prüfung von Schweißverbindungen - Probenabmessungen und Durchführung des Schlagscherzugversuchs und des Schlagkopfzugversuchs (ISO 14323:2006)

Diese Internationale Norm behandelt die zerstörende Prüfung von Schweißverbindungen.
Diese Internationale Norm legt die Probenabmessungen und Prüfverfahren für die Schlagscherzug- und die Schlagkopfzugprüfung von Widerstandspunkt- und geprägten Buckelschweißverbindungen überlappender Bleche aus beliebigem metallischen Werkstoff mit einer Dicke von 0,5 mm bis 4 mm fest.

Soudage par résistance par points et par bossages - Essais destructifs des soudures - Dimensions des éprouvettes et procédure d'essai de cisaillement par choc et d'essai de traction par choc sur éprouvettes en croix (ISO 14323:2006)

L'ISO 14323:2006 traite des essais destructifs des soudures. Elle spécifie les dimensions des éprouvettes et les modes opératoires d'essai de cisaillement par choc et de traction sur éprouvettes en croix des soudures par résistance par points et par bossages de tôles minces, en tout matériau, d'épaisseur de 0,5 mm à 4 mm.

Točkovno in bradavično uporovno varjenje – Porušitveno preskušanje zvarov – Mere vzorcev za udarni strižni in prečni natezni preskus (ISO 14323:2006)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2006
• Withdrawal Date: 03-Mar-2015
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 5/WG 7 - Destructive testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-Mar-2015
• Ref Project: SIST EN ISO 14323:2006 - Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2006)

Relations

• Replaced By: EN ISO 14323:2015 - Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds (ISO 14323:2015)
• Effective Date: 11-Mar-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14323:2006
01-oktober-2006
7RþNRYQRLQEUDGDYLþQRXSRURYQRYDUMHQMH±3RUXãLWYHQRSUHVNXãDQMH]YDURY±
0HUHY]RUFHY]DXGDUQLVWULåQLLQSUHþQLQDWH]QLSUHVNXV,62
Resistance spot welding and projection welds - Destructive testing of welds - Specimen
dimensions and procedure for impact shear test and cross-tension testing (ISO
14323:2006)
Widerstandspunkt- und Buckelschweißen - Zerstörende Prüfung von
Schweißverbindungen - Probenabmessungen und Durchführung des
Schlagscherzugversuchs und des Schlagkopfzugversuchs (ISO 14323:2006)
Soudage par résistance par points et par bossages - Essais destructifs des soudures -
Dimensions des éprouvettes et procédure d'essai de cisaillement par choc et d'essai de
traction par choc sur éprouvettes en croix (ISO 14323:2006)
Ta slovenski standard je istoveten z: EN ISO 14323:2006
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 14323:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14323:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 14323:2006
EUROPEAN STANDARD
EN ISO 14323
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2006
ICS 25.160.40

English Version
Resistance spot welding and projection welds - Destructive
testing of welds - Specimen dimensions and procedure for
impact shear test and cross-tension testing (ISO 14323:2006)
Soudage par résistance par points et par bossages - Widerstandspunkt- und Buckelschweißen - Zerstörende
Essais destructifs des soudures - Dimensions des Prüfung von Schweißverbindungen - Probenabmessungen
éprouvettes et procédure d'essai de cisaillement par choc und Durchführung des Schlagscherzugversuchs und des
et d'essai de traction par choc sur éprouvettes en croix Schlagkopfzugversuchs (ISO 14323:2006)
(ISO 14323:2006)
This European Standard was approved by CEN on 9 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14323:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14323:2006

EN ISO 14323:2006 (E)





Foreword


This document (EN ISO 14323:2006) has been prepared by Technical Committee IIW
"International Institute of Welding" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2006, and conflicting national
standards shall be withdrawn at the latest by November 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 14323:2006 has been approved by CEN as EN ISO 14323:2006 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14323:2006


INTERNATIONAL ISO
STANDARD 14323
First edition
2006-05-01

Resistance spot welding and projection
welds — Destructive testing of welds —
Specimen dimensions and procedure for
impact shear test and cross-tension
testing
Soudage par résistance par points et par bossages — Essais
destructifs des soudures — Dimensions des éprouvettes et procédure
d'essai de cisaillement par choc et d'essai de traction par choc sur
éprouvettes en c
...