iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 20387:2020

(Main)

Biotechnology - Biobanking - General requirements for biobanking (ISO 20387:2018)

Biotechnology - Biobanking - General requirements for biobanking (ISO 20387:2018)

This document specifies general requirements for the competence, impartiality and consistent operation of biobanks including quality control requirements to ensure biological material and data collections of appropriate quality.
This document is applicable to all organizations performing biobanking, including biobanking of biological material from multicellular organisms (e.g. human, animal, fungus and plant) and microorganisms for research and development.
Biobank users, regulatory authorities, organizations and schemes using peer-assessment, accreditation bodies, and others can also use this document in confirming or recognizing the competence of biobanks.
This document does not apply to biological material intended for food/feed production, laboratories undertaking analysis for food/feed production, and/or therapeutic use.
NOTE 1    International, national or regional regulations or requirements can also apply to specific topics covered in this document.
NOTE 2    For entities handling human materials procured and used for diagnostic and treatment purposes ISO 15189 and other clinical standards are intended to apply first and foremost.

Biotechnologie - Biobanking - Allgemeine Anforderungen an Biobanking (ISO 20387:2018)

Biotechnologie - «Biobanking» - Exigences générales relatives au «biobanking» (ISO 20387:2018)

Le présent document spécifie les exigences générales pour la compétence, l'impartialité et l'exploitation cohérente des biobanques, y compris les exigences en matière de contrôle qualité, pour assurer la qualité appropriée des collections de matériels biologiques et des données associées.
Le présent document est applicable à toutes les organisations qui pratiquent le «biobanking» pour la recherche et le développement, y compris le «biobanking» de matériels biologiques issus d'organismes pluricellulaires (par exemple humains, animaux, champignons et végétaux) et de micro-organismes.
Les utilisateurs des biobanques, les autorités réglementaires, les organisations et les systèmes utilisant l'évaluation par les pairs, les organismes d'accréditation et d'autres entités peuvent également utiliser ce document pour confirmer ou reconnaître la compétence des biobanques.
Le présent document ne s'applique pas aux matériels biologiques destinés à la production de denrées alimentaires/d'aliments pour animaux, aux laboratoires effectuant des analyses pour la production de denrées alimentaires/d'aliments pour animaux et/ou à une utilisation thérapeutique.
NOTE 1    Des réglementations ou exigences internationales, nationales ou régionales peuvent également s'appliquer à des sujets spécifiques traités dans le présent document.
NOTE 2    Pour les entités ayant à traiter des matériels humains acquis et utilisés à des fins diagnostiques et thérapeutiques, l'ISO 15189 et les autres normes cliniques doivent s'appliquer en priorité.

Biotehnologija - Biobančništvo - Splošne zahteve za biobančništvo (ISO 20387:2018)

General Information

Status
Published
Publication Date
22-Sep-2020
Withdrawal Date
30-Mar-2021
ICS
07.080 - Biology. Botany. Zoology
Technical Committee
CEN/CLC/TC 1 - Criteria for conformity assessment bodies
Drafting Committee
CEN/CLC/TC 1 - Criteria for conformity assessment bodies
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
23-Sep-2020
Due Date
12-Aug-2022
Completion Date
23-Sep-2020
Directive
765/2008 - REGULATION (EC) No 765/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93
Mandate
M/417 - Standardisation mandate addessed to CEN, CENELEC, and ETSI for the use of Harmonised Standards in support of the new legal framework and sectoral certification schemes
Ref Project
SIST EN ISO 20387:2020 - Biotechnology - Biobanking - General requirements for biobanking (ISO 20387:2018)

Buy Standard

EN ISO 20387:2020EN ISO 20387:2020
PreviousNext
Standard
EN ISO 20387:2020
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20387:2020
01-november-2020
Biotehnologija - Biobančništvo - Splošne zahteve za biobančništvo (ISO
20387:2018)
Biotechnology - Biobanking - General requirements for biobanking (ISO 20387:2018)
Biotechnologie - Biobanking - Allgemeine Anforderungen an Biobanking (ISO
20387:2018)
Biotechnologie - «Biobanking» - Exigences générales relatives au «biobanking» (ISO
20387:2018)
Ta slovenski standard je istoveten z: EN ISO 20387:2020
ICS:
07.080 Biologija. Botanika. Zoologija Biology. Botany. Zoology
SIST EN ISO 20387:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 20387:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 20387:2020


EUROPEAN STANDARD
EN ISO 20387

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2020
ICS 07.080

English version

Biotechnology - Biobanking - General requirements for
biobanking (ISO 20387:2018)
Biotechnologie - "Biobanking" - Exigences générales Biotechnologie - Biobanking - Allgemeine
relatives au "biobanking" (ISO 20387:2018) Anforderungen an Biobanking (ISO 20387:2018)
This European Standard was approved by CEN on 31 August 2020.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.






















CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2020 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. EN ISO 20387:2020 E
reserved worldwide for CEN national Members and for
CENELEC Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 20387:2020
EN ISO 20387:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 20387:2020
EN ISO 20387:2020 (E)
European foreword
The text of ISO 20387:2018 has been prepared by Technical Committee ISO/TC 276 "Biotechnology” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 20387:2020
by Technical Committee CEN/CLC/JTC 1 “Criteria for conformity assessment bodies” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2021, and conflicting national standards shall
be withdrawn at the latest by March 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 20387:2018 has been approved by CEN as EN ISO 20387:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 20387:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 20387:2020
INTERNATIONAL ISO
STANDARD 20387
First edition
2018-08
Bio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 17704:2022(Main)
Plant biostimulants - Determination of dry matter
SIST-TS CEN/TS 17704:2023

This document specifies the procedure for the determination and calculation of the dry matter fraction of plant biostimulants for which the results of performed analysis are to be calculated to the dry matter basis.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17706:2022(Main)
Plant biostimulants - Determination of inorganic arsenic
SIST-TS CEN/TS 17706:2023

This document specifies a method for extraction, separation, and determination of inorganic arsenic (iAs) in plant biostimulants using anion-exchange high performance liquid chromatography (HPLC) or ion chromatography (IC) coupled to ICP-MS.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17725:2022(Main)
Plant biostimulants - Determination of the quantity (indicated by mass or volume)
SIST-TS CEN/TS 17725:2023

This document specifies the methods to be used for the determination of quantity of solid and liquid forms of plant biostimulants in packages, containers or in bulk.
This document is not applicable to the quantity determination of: soil improvers, growing media, organic and organo-mineral fertilizers and fertilizing product blends whose main constituent is a growing media or soil improver. The method for quantity determination for these products is given in EN 15761, EN 15238 and EN 12580.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17701-3:2022(Main)
Plant biostimulants - Determination of specific elements - Part 3: Determination of mercury
SIST-TS CEN/TS 17701-3:2023

This document specifies a method for determination of the content of mercury (Hg) in plant biostimulants using (cold) vapour generation apparatus coupled to an atomic absorption spectrophotometer and a method using a direct amalgamation technique. It is applicable to aqua regia digests prepared according to CEN/TS 17701-1.
NOTE    It is also possible to use other suitable methods for the determination of mercury described in Annex A if users prove that the method gives the same results as the methods described in this document.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17703:2022(Main)
Plant biostimulants - Determination of chromium(VI)
SIST-TS CEN/TS 17703:2023

This document was developed to provide a method for verifying that hexavalent chromium (CrVI) is not present in plant biostimulants in a concentration that exceeds the respective limits outlined in the EU Regulation on Fertilising Products [1].
This document is applicable to all types of plant biostimulants (solid and liquid ) used in agriculture.
The method described is suitable to quantify the chromium(VI) content in plant biostimulants down to 2 mg/kg.
The results obtained from this method are strictly dependent on the extraction conditions. Results obtained by using other extraction procedures (extraction solution, pH, extraction time, etc.) are not comparable with the results produced by the procedure described in this document.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17705:2022(Main)
Plant biostimulants - Determination of phosphonates
SIST-TS CEN/TS 17705:2023

This document specifies a method for the extraction and determination of phosphonates (P–PO3) in plant biostimulants using ion chromatography and conductivity detection (IC-CD).
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16817-2:2015(Main)
Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies
SIST-TS CEN/TS 16817-2:2016

This Technical Specification describes a procedure through which pollen – in particular pollen of genetically modified organisms (GMO) – can be sampled by means of bee colonies.
Bee colonies, especially the foraging bees, actively roam an area and are therefore area related samplers. Pollen sampling depends on the collection activity of the bees and the availability of pollen sources within the spatial zone according to the bees' preferences (supply of melliferous plants). A colony of bees normally forages over an area of up to 5 km radius (median 1,6 km, mean 2,2 km), in rare cases some bees may also forage in greater distances up to 10 km and more [26].
Foragers fix the gathered pollen on the outside of their hind legs (pollen loads, also known as pollen pellets). Inside the hive they place these pollen loads into comb cells close to the brood nest (bee bread). Furthermore, foragers gather nectar and honeydew. Nectar contains pollen which fell from the anthers of the blossom into the nectar drop, or pollen which was dispersed by the wind and sticks in the nectar of other blossoms or adheres to the sticky honeydew of plants. Nectar and honeydew are converted to honey and stored by the bees in the beehive.
Honey, pollen load and bee-bread may be used as sample matrices for the subsequent analysis of pollen as it is possible to concentrate sufficient amounts of pollen for microscopic and molecular biological diagnostics.
Microscopic analysis is used to identify the various pollen types and to quantify the exposure to the target pollen types in question. GMO exposure is analyzed by molecular-biological methods: For analysis of pollen DNA quantitative PCR methods are used and described here in this Technical Specification. The analysis of GMO specific proteins and toxins in pollen is possible, too, using ELISA, but to this date the method has not been evaluated enough in pollen matrices for standardization in this Technical Specification.

  • Technical specification
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16817-1:2015(Main)
Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler
SIST-TS CEN/TS 16817-1:2016

This Technical Specification describes a procedure for the use of the passive samplers Sigma-2 and PMF to sample airborne pollen. Both are designed to sample coarse aerosol particles. Collected samples are used to analyze pollen input with regard to pollen type and amount, and input of transgenic pollen. The Sigma-2 passive sampler here provides a standardized sampling method for direct microscopic pollen analysis and quantifying the aerial pollen input at the site. The PMF yields sufficient amounts of pollen to additionally carry out molecular-biological diagnostics for detection of GMO.
Essential background information on performing GMO monitoring is given in Guideline VDI 4330 Part 1 [4], which is based on an integrated assessment of temporal and spatial variation of GMO cultivation (sources of GMO), the exposure in the environment and biological/ecological effects. Ideally, the pollen sampling using technical samplers for GMO monitoring should be undertaken in combination with the biological collection of pollen by bees (FprCEN/TS 16817-2).
The application of technical passive samplers and the use of honey bee colonies as active biological collectors complement each other in a manifold way when monitoring the exposure to GMO pollen. Technical samplers provide results regarding the pollen input at the sampling site in a representative way, whereas with biological sampling by honey bee colonies, pollen from flowering plants in the area is collected according to the bees' collection activity. Thus, this method represents GMO exposure to roaming insects. By combining the two sampling methods these two main principles of exposure are represented. Furthermore, a broad range of pollen species is covered.
The sample design depends on the intended measuring objective. Some examples are given in 6.2.

  • Technical specification
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13441:2001(Main)
Biotechnology - Laboratories for research, development and analysis - Guidance on containment of genetically modified plants
SIST EN 13441:2002

This European Standard gives biological, physical and procedural containment measures for work with genetically modified plants including plants where the transferred genetic material is derived from a non-plant source. It defines measures to minimize hazards identified by risk analysis.
Containment may be provided in a greenhouse or in a growthroom, laboratory or other containment facility.
Containment of genetically modified microorganisms and/or small animals associated with plants is not included in this standard. Containment of microorganisms in laboratories is covered in EN 12128.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13311-6:2001(Main)
Biotechnology - Performance criteria for vessels - Part 6: Chromatography columns
SIST EN 13311-6:2002

This European Standard specifies performance criteria for chromatography columns used in biotechnological processes with respect to the potential risks to the worker and the environment from microorganisms in use.  This European Standard applies where the intended use of chromatography columns includes hazardous or potentially hazardous microorganisms used in biotechnological processes or where exposure of the worker or the environment to such microorganisms is restricted for reasons of safety.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day