EN ISO 10366-2:1999

Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:1994)

Kunststoffe - Methylmethacrylat/Acrylnitril/Butadien/Styrol (MABS)-Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 10366-2:1994)

Dieser Teil von ISO 10366 legt die Bedingungen zur Herstellung von Probeko(rpern und die zur Bestimmung der Eigenschaften von MABS-Formmassen anzuwendenden Pru(fverfahren fest. Anforderungen an die Behandlung des Probenmaterials und fu(r das Konditionieren des Probenmaterials vor der Herstellung der Probeko(rper und der Probeko(rper vor der Pru(fung sind ebenfalls enthalten.

Plastiques - Méthylméthacrylate/acrylonitrile/butadiène/styrène (MABS) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 10366-2:1994)

Polimerni materiali - Materiali za oblikovanje in ekstrudiranje na osnovi kopolimerov metilmetakrilat/akrilonitril/butadien/stiren (MABS) - 2. del: Priprava preskušancev in določanje lastnosti (ISO 10366-2:1994)

General Information

• Status: Withdrawn
• Publication Date: 18-May-1999
• Withdrawal Date: 30-Nov-2003
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/SC 1/WG 9 - Styrenics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: SIST EN ISO 10366-2:2000 - Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:1994)

Relations

• Replaced By: EN ISO 10366-2:2003 - Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10366-2:2000
01-maj-2000
3ROLPHUQLPDWHULDOL0DWHULDOL]DREOLNRYDQMHLQHNVWUXGLUDQMHQDRVQRYL
NRSROLPHURYPHWLOPHWDNULODWDNULORQLWULOEXWDGLHQVWLUHQ0$%6GHO3ULSUDYD
SUHVNXãDQFHYLQGRORþDQMHODVWQRVWL,62
Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and
extrusion materials - Part 2: Preparation of test specimens and determination of
properties (ISO 10366-2:1994)
Kunststoffe - Methylmethacrylat/Acrylnitril/Butadien/Styrol (MABS)-Formmassen - Teil 2:
Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 10366-2:1994)
Plastiques - Méthylméthacrylate/acrylonitrile/butadiene/styrene (MABS) pour moulage et
extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO
10366-2:1994)
Ta slovenski standard je istoveten z: EN ISO 10366-2:1999
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 10366-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10366-2:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 10366-2:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 10366-2:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 10366-2:2000
INTERNATIONAL ISO
STANDARD 10366-2
First edition
1994-11-01
Plastics - Methyl methacrylate/
acrylonitrile/butadiene/styrene (MABS)
moulding and extrusion materials -
Part 2:
Preparation of test specimens and
determination of properties
Plas tiques - Mk thylme thacryla te/acrylonitrile/ bu tadienels tyr&ne (MA BS)
pouf moulage et extrusion -
Partie 2: Prkpara tion des eprouve ttes et determina Gon des propr2 t&
Reference number
ISO 10366-2:1994(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 10366-2:2000
ISO 10366=2:1994(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10366-2 was prepared by Technical Committee
lSO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials.
ISO 10366 consists of the following Parts, under the general title Plastics
- Methyl methactylate/acrylonitrile/butadiene/styrene (MABS) moulding
and extrusion materjak:
- Part 7: Designation sys tem and basis for specifications
- Part 2: Preparation of test specimens and determination of proper-
ties
Annex A forms an integral patt of this part of ISO 10366.
0 ISO 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1 211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 10366-2:2000
INTERNATIONAL STANDARD 0 ISO
ISO 10366=2:1994(E)
- Methyl methacrylatel
Plastics
acrylonitrile/butadiene/styrene (MABS) moulding and
extrusion materials -
Part 2:
Preparation of test specimens and determination of
properties
1 Scope 2 Normative references
This patt of ISO 10366 specifies the methods of
The foliowing Standards contain provisions which,
preparation of test specimens and the test methods
through reference in this text, constitute provisions
to be used in determining the properties of MABS
of this part of ISO 10366. At the time of publication,
moulding and extrusion materials. Requirements for
the editions indicated were vaiid. All Standards are
handling test material and for conditioning both the
subject to revision, and Parties to agreements based
test material before moulding and the specimens be-
on this part of ISO 10366 are encouraged to investi-
fore testing are given here.
gate the possibiiity of appiying the most recent edi-
tions of the Standards indicated beiow. Members of
Procedures and conditions for the preparation of test
IEC and ISO maintain registers of currently vaiid
specimens and procedures for measuring properties
International Standards.
of the materials from which these specimens are
made are given. Properties and test methods which
ISO 62:1980, Plastics - Determination of water ab-
are suitable and necessary to characterize MABS
sorp tion.
moulding and extrusion materials are listed.
ISO 75-1: 1993, Plastics - Determination of tempera-
The properties have been selected from the general
ture of deflection under load - Part 7: General test
test methods in ISO 10350. Other test methods in
me thod.
wide use for or of particular significance to these
moulding and extrusion materials are also included in
ISO 75-2: 1993, Plastics
- Determination of tempera-
this patt of ISO 10366, as are the designatory prop-
ture of deflection under load - Part 2: Plastics and
erties specified in par-t 1: Vicat softening temperature,
ebonite.
melt flow rate, impact strength and flexural modulus.
ISO 178: 1993, Plastics - Determination of flexural
In Order to obtain reproducible and comparable test
properties.
results, it is necessary to use the methods of speci-
men preparation and conditioning, the specimen di-
ISO 179: 1993, Plastics - Determination of Charpy
mensions and the test procedures specified herein.
impact strength.
Values determined will not necessarily be identicai to
those obtained using specimens of different dimen- ISO 180:1993, Plastics - Determination of Izod im-
sions or prepared using different procedures. patt strength.
1

---------------------- Page: 7 ----------------------

SIST EN ISO 10366-2:2000
0 ISO
ISO 10366=2:1994(E)
-*), Plastics - Determination of burning
ISO 4589-2:
ISO 291 : 1977, Plastics - Standard atmospheres for
behyviour by Oxygen index - Part 2: Ambient-
conditioning and tes ting.
tempera ture test.
- Compression moulding test
ISO 293: 1986, Plastics
ISO 4589-3: -*), Plastics - Determination o f b Urning
specimens of thermoplas tic ma terials.
behaviour by Oxygen index - Part 3: Elevated-
ISO 294:~ ‘1, Plastics - Injection moulding of test tempera ture test.
specimens of thermoplas tic ma terials.
ISO 8256:1990, Plastics - Determination of tensile-
ISO 306:1994, Plastics - Thermoplastic materials - impact strength.
Determination of Vita t softening tempera ture (VST).
ISO 10350: 1993, Plastics - Acquisition and presen-
ta tion o f comparable Single-poin t da ta.
ISO 527-1 :1993, Plastics - Determination of tensile
Part 1: General principles.
properties -
Methyl
ISO 10366-1: 1993, Plas tics -
ISO 527-2:1993, Plastics - Determination of tensile methacrylate/acrylonitrile/butadiene/styrene (MABS)
properties - Part 2: Test conditions for moulding and moulding and extrusion materials - Part 1: Desig-
nation s ystem and basis for specifications.
extrusion plastics.
Plastics - Determination of tensile
ISO 527-4: -*), IEC 93:1980, Methods of test for volume resistivity
properties - Part 4: Test conditions for isotropic and and surface resistivity of solid electrical insulating
aniso tropic fibre-rein forced plas tic composites. ma terials.
ISO 899-1: 1993, Plastics - Determination of creep IEC 112: 1979, Method for determining the compar-
Part 1: Tensile creep. ative and the proo f tracking indices o f solid insulating
behaviour -
ma terials under moist conditions.
ISO 1133:1991, Plastics - Determination of the melt
mass-flow rate (MFR) and the melt volume-flow rate IEC 243-1 :1988, Methods of test for electric strength
(M VR) of thermoplas tics. of solid insulating materials - Part ? : Tests at power
frequencies.
ISO 1183:1987, Plastics - Methods for determining
the density and relative density of non-cellular IEC 250: 1969, Recommended methods for the deter-
mination of the permittivity and dielectric dissipation
plastics.
factor of electrical insulating materials at power, audio
ISO 1210:1992, Plastics - Determination of the
and radio frequencies including metre wavelengths.
burning behaviour of horizontal and vertical specimens
in contact with a small-flame ignition Source. IEC 296: 1982, Specific
...