Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method

This European Standard describes a test method to determine the amount of lead on the surface of test specimens made from lead containing copper alloys.

Einfluss metallischer Werkstoffe auf Wasser für den menschlichen Gebrauch - Bestimmung des Rückstands an Oberflächenblei (Pb) - Extraktionsverfahren

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Bleimenge an der Oberfläche von Prüfkörpern aus bleihaltigen Kupferlegierungen.

Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Dosage du plomb (Pb) résiduel de surface - Méthode d'extraction

La présente Norme européenne décrit une méthode d'essai pour déterminer la quantité de plomb à la surface d'éprouvettes en alliages de cuivre au plomb.

Vpliv kovinskih materialov na pripravo pitne vode - Določanje ostankov svinca (Pb) na površini - Metoda ekstrakcije

Ta evropski standard navaja preskusno metodo za določanje količine svinca na površini preskušanca, izdelanega iz bakrovih zlitin, ki vsebujejo svinec.

General Information

Status
Published
Publication Date
08-May-2012
Withdrawal Date
29-Nov-2012
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2023
Completion Date
02-Dec-2023

Buy Standard

Standard
EN 16057:2012
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Einfluss metallischer Werkstoffe auf Wasser für den menschlichen Gebrauch - Bestimmung des Rückstands an Oberflächenblei (Pb) - ExtraktionsverfahrenInfluence des matériaux métalliques sur l'eau destinée à la consommation humaine - Dosage du plomb (Pb) résiduel de surface - Méthode d'extractionInfluence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method67.250Materiali in predmeti v stiku z živiliMaterials and articles in contact with foodstuffs13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 16057:2012SIST EN 16057:2012en,fr,de01-september-2012SIST EN 16057:2012SLOVENSKI
STANDARD



SIST EN 16057:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16057
May 2012 ICS 67.250 English Version
Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
Influence des matériaux métalliques sur l'eau destinée à la consommation humaine - Dosage du plomb (Pb) résiduel de surface - Méthode d'extraction
Einfluss metallischer Werkstoffe auf Wasser für den menschlichen Gebrauch - Bestimmung des Rückstands an Oberflächenblei (Pb) - Extraktionsverfahren This European Standard was approved by CEN on 13 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16057:2012: ESIST EN 16057:2012



EN 16057:2012 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Principle .55 Reagents .56 Apparatus .67 Test specimen .67.1 Method-control-sample (MCS) .67.1.1 Use of method control sample .67.1.2 Material of method-control-sample .67.1.3 Geometry .67.1.4 Manufacturing process for the MCS .77.2 Process sample (PS) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.