prEN 18354

Welding consumables — Testing of welding consumables by means of weld metal specimens — Test piece for determining the hardness of surfacing

This document specifies the preparation of test pieces for determining the hardness of surfacing on steel produced by fusion welding.

Schweißzusätze - Prüfung von Schweißzusätzen mittels Schweißgutproben - Prüfstück für die Ermittlung der Härte von Auftragschweißungen

Dieses Dokument legt die Herstellung von Prüfstücken für die Ermittlung der Härte von Auftragschweißungen auf Stahl, gefertigt durch Schmelzschweißen, fest.

Produits consommables de soudage - Contrôles des produits consommables de soudage au moyen de prélèvements de métal d'apport - Eprouvette pour la détermination de la dureté des soudures de rechargement

Le présent document spécifie la préparation des éprouvettes destinées à la détermination de la dureté des rechargements sur l'acier obtenus par soudage par fusion.

Dodajni in pomožni materiali za varjenje - Preskušanje dodajnih in pomožnih materialov z uporabo preskušancev - Preskusni vzorec za določanje trdote površinske plasti/nanosnega sloja

Ta dokument določa pripravo preizkušancev za določanje trdote površinske plasti na jeklu, proizvedenem s talilnim varjenjem.

General Information

• Status: Not Published
• Publication Date: 12-Sep-2027
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 14-May-2026
• Due Date: 27-Apr-2026
• Completion Date: 14-May-2026
• Ref Project: oSIST prEN 18354:2026 - Welding consumables - Testing of welding consumables by means of weld metal specimens - Test piece for determining the hardness of surfacing

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2026
Dodajni in pomožni materiali za varjenje - Preskušanje dodajnih in pomožnih
materialov z uporabo preskušancev - Preskusni vzorec za določanje trdote
površinske plasti/nanosnega sloja
Welding consumables - Testing of welding consumables by means of weld metal
specimens - Test piece for determining the hardness of surfacing
Schweißzusätze - Prüfung von Schweißzusätzen mittels Schweißgutproben - Prüfstück
für die Ermittlung der Härte von Auftragschweißungen
Produits consommables de soudage - Contrôles des produits consommables de
soudage au moyen de prélèvements de métal d'apport - Eprouvette pour la
détermination de la dureté des soudures de rechargement
Ta slovenski standard je istoveten z: prEN 18354
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2026
ICS 25.160.20
English Version
Welding consumables - Testing of welding consumables by
means of weld metal specimens - Test piece for
determining the hardness of surfacing
Produits consommables de soudage - Contrôles des Schweißzusätze - Prüfung von Schweißzusätzen
produits consommables de soudage au moyen de mittels Schweißgutproben - Prüfstück für die
prélèvements de métal d'apport - Eprouvette pour la Ermittlung der Härte von Auftragschweißungen
détermination de la dureté des soudures de
rechargement
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18354:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Designation of the test piece . 4
5 Test piece — Preparation and materials . 5
6 Preparation of the test piece . 5
6.1 Procedure . 5
6.2 Pass sequence and weld sequence. 6
7 Machining of the test piece . 7
8 Determination of hardness . 7
9 Test report . 7
Bibliography . 9

European foreword
This document (prEN 18354:2026) has been prepared by Technical Committee CEN/TC 121 “Welding
and allied processes”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
1 Scope
This document specifies the preparation of test pieces for determining the hardness of surfacing on steel
produced by fusion welding.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 10025-2, Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy
structural steels
EN ISO 6947, Welding and allied processes — Welding positions (ISO 6947)
EN ISO 13916, Welding — Measurement of preheating temperature, interpass temperature and preheat
maintenance temperature (ISO 13916)
ISO 4063:2023, Welding and allied processes — Nomenclature of processes and reference numbers
3 Terms and definitions
For the purposes of this document, the following term and definition apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC El
...