EN 1912:2004
(Main)Structural timber - Strength classes - Assignment of visual grades and species
Structural timber - Strength classes - Assignment of visual grades and species
This European Standard lists visual strength grades, species and sources of timber, and specifies the strength classes from EN 338, to which they are assigned.
NOTE For the grades, species and sources included, there is long experience of use and/or satisfactory test data. The sources listed are therefore largely determined by existing commercial practice.
Bauholz für tragende Zwecke - Festigkeitsklassen - Zuordnung von visuellen Sortierklassen und Holzarten
Dieses Dokument gibt visuelle Festigkeitsklassen, Holzarten und deren Herkunft an und legt die Festigkeitsklassen nach EN 338 fest, denen sie zugeordnet sind.
ANMERKUNG Für die angegebenen Sortierklassen, Holzarten und Herkünfte liegen langjährige praktische Erfahrungen und/oder befriedigende Prüfdaten vor. Die angegebene Herkunft orientiert sich daher weitestgehend an der gewerblichen Praxis.
Bois de structure - Classes de résistance - Affectation des classes visuelles et des essences
Le présent document répertorie les classes visuelles de résistance, les essences et les origines de bois et spécifie les classes de résistance, fixées par l'EN 338, auxquelles elles se rapportent.
NOTE Pour les classes, essences et origines d'approvisionnement incluses, on doit pouvoir justifier d'une grande expérience d'utilisation et/ou de données d'essais satisfaisantes. Les origines sont donc largement déterminées par la pratique commerciale existante.
Konstrukcijski les - Trdnostni razredi - Določitev trdnostnih razredov na podlagi vizualnega razvrščanja in vrste lesa
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Structural timber - Strength classes - Assignment of visual grades and speciesBois de structure - Classes de résistance - Affectation des classes visuelles et des essencesBauholz für tragende Zwecke - Festigkeitsklassen - Zuordnung von visuellen Sortierklassen und HolzartenTa slovenski standard je istoveten z:EN 1912:2004SIST EN 1912:2005en79.040Les, hlodovina in žagan lesWood, sawlogs and sawn timberICS:SIST EN 1912:2000/AC:2000SIST EN 1912:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 1912:200501-maj-2005
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1912
December 2004 ICS 79.040 Supersedes EN 1912:1998 English version
Structural timber - Strength classes - Assignment of visual grades and species
Bois de structure - Classes de résistance - Affectation des classes visuelles et des essences
Bauholz für tragende Zwecke - Festigkeitsklassen - Zuordnung von visuellen Sortierklassen und Holzarten This European Standard was approved by CEN on 10 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1912:2004: E
EN 1912:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Symbols and abbreviations.4 5 Requirements.5 6 Assignments to strength classes.5 Annex A (informative)
Grading standards.14 Bibliography.16
EN 1912:2004 (E) 3 Foreword This document (EN 1912:2004) has been prepared by Technical Committee CEN/TC 124 “Timber structures”, the secretariat of which is held by SFS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. This document supersedes EN 1912:1998. This revised version contains assignments of additional grades and species. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 1912:2004 (E) 4
1 Scope This document lists visual strength grades, species and sources of timber, and specifies the strength classes from EN 338, to which they are assigned. NOTE For the grades, species and sources included, there is long experience of use and/or satisfact
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.