Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011)

ISO 13501:2011 specifies a standard procedure for assessing and modifying the performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing.
The procedure described in ISO 13501:2011 is not intended for the comparison of similar types of individual pieces of equipment.

Erdöl- und Erdgasindustrie - Bohrflüssigkeiten - Beurteilung von Verarbeitungssystemen

Industries du pétrole et du gaz naturel - Fluides de forage - Évaluation des équipements de traitement (ISO 13501:2011)

L'ISO 13501:2011 spécifie un mode opératoire normalisé pour l'évaluation et la modification de la performance de systèmes d'équipements de contrôle des solides couramment utilisés sur le terrain dans le domaine du traitement des fluides de forage  pétrolier et du gaz naturel.
Il n'est pas prévu que le mode opératoire de l'ISO 13501:2011 soit utilisé pour comparer des pièces d'équipement individuelles de type similaire.

Industrija za predelavo nafte in zemeljskega plina - Vrtalne tekočine - Vrednotenje predelovalne opreme (ISO 13501:2011)

Ta mednarodni standard opredeljuje standardni postopek za ocenjevanje in spreminjanje delovanja sistemov opreme za kontrolo trdnih snovi, ki se običajno uporabljajo pri predelavi vrtalnih tekočin v industriji za predelavo nafte in zemeljskega plina. Postopek, opisan v tem mednarodnem standardu, ni namenjen primerjavi podobnih tipov posameznih kosov opreme.

General Information

Status
Published
Publication Date
14-Jun-2011
Withdrawal Date
30-Dec-2011
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Jun-2011
Completion Date
15-Jun-2011

Relations

Buy Standard

Standard
EN ISO 13501:2011
English language
69 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2011
1DGRPHãþD
SIST EN ISO 13501:2007
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD9UWDOQHWHNRþLQH9UHGQRWHQMH
SUHGHORYDOQHRSUHPH ,62
Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation
(ISO 13501:2011)
Erdöl- und Erdgasindustrie - Bohrspülungen - Bewertung von Messgeräten (ISO
13501:2011)
Industries du pétrole et du gaz naturel - Fluides de forage - Évaluation des équipements
de traitement (ISO 13501:2011)
Ta slovenski standard je istoveten z: EN ISO 13501:2011
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13501
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2011
ICS 75.180.10 Supersedes EN ISO 13501:2006
English Version
Petroleum and natural gas industries - Drilling fluids -
Processing equipment evaluation (ISO 13501:2011)
Industries du pétrole et du gaz naturel - Fluides de forage - Erdöl- und Erdgasindustrie - Bohrspülungen - Bewertung
Évaluation des équipements de traitement (ISO von Messgeräten (ISO 13501:2011)
13501:2011)
This European Standard was approved by CEN on 25 May 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13501:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 13501:2011) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn
at the latest by December 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13501:2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13501:2011 has been approved by CEN as a EN ISO 13501:2011 without any modification.

INTERNATIONAL ISO
STANDARD 13501
Second edition
2011-06-15
Petroleum and natural gas industries —
Drilling fluids — Processing equipment
evaluation
Industries du pétrole et du gaz naturel — Fluides de forage —
Évaluation des équipements de traitement

Reference number
ISO 13501:2011(E)
©
ISO 2011
ISO 13501:2011(E)
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 13501:2011(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms, definitions, symbols and abbreviated terms .1
3.1 Terms and definitions .1
3.2 Symbols and abbreviated terms .11
4 Requirements.13
5 System performance of drilled-solids removal .13
5.1 Principle.13
5.2 Apparatus.13
5.3 Sampling.14
5.4 Procedure.15
6 Rigsite evaluation of drilled-solids management equipment .18
6.1 Principle.18
6.2 Application .18
6.3 Sampling of streams for capture analysis.19
6.4 Determination of mass fraction (percent) solids .19
6.5 Calculation of capture.20
6.6 Interpretation of results .20
6.7 Procedure for characterizing removed solids.21
6.8 Calculation of mass fraction (percent) of low-gravity solids.21
6.9 Particle size assessment on removed solids .21
6.10 Economics .22
7 Practical operational guidelines .22
7.1 Principle.22
7.2 Apparatus.22
7.3 Procedure for design and operation .23
7.4 Design of shale shakers .26
7.5 Operation of shale shakers .27
7.6 Design of degassers .27
7.7 Operation of degassers .28
7.8 Design of desanders and desilters.28
7.9 Design of mud cleaners.29
7.10 Design of centrifuges.30
7.11 Use of addition sections.30
7.12 Use of drilling fluid mixing and blending equipment .30
7.13 Use of suction section .31
7.14 Use of discharge section.31
8 Conductance of shale shaker screens.31
8.1 Principle.31
8.2 Principle of conductance.31
8.3 Apparatus for measurement of conductance.33
8.4 Procedure for calibrating fluid .34
8.5 Procedure for flow test .34
8.6 Procedure for measuring pressure drop .34
8.7 Procedure for conductance test .35
8.8 Calculation of conductance .35
ISO 13501:2011(E)
9 Shale shaker screen designation.37
9.1 Principle.37
9.2 Apparatus .38
9.3 Preparation of aluminium oxide test media .40
9.4 Preparation of test screen .42
9.5 Test procedure.42
9.6 Calculation of D100 separation for test screen cloth.43
10 Non-blanked area of shale shaker screen panel .46
10.1 Principle.46
10.2 Apparatus .47
10.3 Procedure for pretensioned or perforated panel-type screens .47
10.4 Calculation for pretensioned or perforated panel-type screens.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.