Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of container/pallet transfer transporters when carried out in accordance with the specifications given by the manufacturer or the manufacturer authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This European Standard applies to self-propelled container/pallet transfer transporters, with a seated driver.
Examples of typical transfer transporters are shown in Annex A.
This European Standard does not apply to:
   loading equipment with a height adjustment capability in excess of 150 mm;
   transporter-loaders (single platform loader with transporter capability, see EN 12312 9);
   roller-bed transport platforms mounted on unmodified commercial road chassis.
This European Standard does not establish requirements for noise and vibration.
Noise and vibration are dealt with respectively in EN 1915 3 and EN 1915 4.
This European Standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron.
This Part of EN 12312 is not applicable to GSE which are manufactured before the date of publication by CEN of this European Standard.
NOTE   Certain measurements have been given in imperial units (in parentheses) following the metric measurements since the containers/pallets to be handled are based mainly on the imperial system.

Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 10: Container-/Paletten-Transfer-Transporter

Diese Europäische Norm enthält Sicherheitsanforderungen für Container-/ Paletten-Transfer-Transporter wie sie unter 3.4 definiert sind. Sie gilt für die verschiedenen selbstfahrenden Bauarten, die unter dem Begriff Container-/ Paletten-Transfer-Transporter zusammengefaßt sind. Beispiele siehe Anhang C. Diese Europäische Norm gilt nicht: - für andere Bauarten von Luftfahrzeug- Ladegeräten oder Container/Paletten-Tranportern; - für Ladegeräte bei denen der Hub der Hebeeinrichtung über das in dieser Norm festgelegte Maß zur Höhenanpassung hinausgeht.

Matériel au sol pour aéronefs - Exigences particulières - Partie 10: Transporteurs de conteneurs et de palettes

La présente norme européenne définit les exigences de sécurité applicables aux transporteurs de conteneurs/palettes tels que définis en 3.4. Elle s'applique à divers types autotractés de transporteurs couramment désignés par le terme de transporteurs de conteneurs/palettes. Voir les exemples de l'Annexe C (informative). La présente norme européenne ne s'applique pas aux: - autres formes de chargeurs d'aéronefs ou transporteurs de conteneurs/palettes; - matériels de chargement d'une capacité de levage supérieure à celle qui est spécifiée dans la présente norme, en ce qui concerne le nivelage uniquement.

Podporna oprema na tleh za letalski promet – Posebne zahteve – 10. del: Naprave za pretovarjanje zabojnikov/palet

General Information

Status
Withdrawn
Publication Date
19-Jul-2005
Withdrawal Date
28-Apr-2009
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
29-Apr-2009
Completion Date
29-Apr-2009

Relations

Buy Standard

Standard
EN 12312-10:2005
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Podporna oprema na tleh za letalski promet – Posebne zahteve – 10. del: Naprave za pretovarjanje zabojnikov/paletLuftfahrt-Bodengeräte - Besondere Anforderungen - Teil 10: Container-/Paletten-Transfer-TransporterMatériel au sol pour aéronefs - Exigences particulieres - Partie 10: Transporteurs de conteneurs et de palettesAircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters55.180.01Distribucija blaga s prevozom na splošnoFreight distribution of goods in general49.120Oprema za tovorCargo equipmentICS:Ta slovenski standard je istoveten z:EN 12312-10:2005SIST EN 12312-10:2005en01-november-2005SIST EN 12312-10:2005SLOVENSKI
STANDARD



SIST EN 12312-10:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12312-10July 2005ICS 49.100English versionAircraft ground support equipment - Specific requirements - Part10: Container/Pallet transfer transportersMatériel au sol pour aéronefs - Exigences particulières -Partie 10 : Transporteurs de conteneurs et de palettesLuftfahrt-Bodengeräte - Besondere Anforderungen - Teil10: Container-/Paletten-Transfer-TransporterThis European Standard was approved by CEN on 13 June 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12312-10:2005: ESIST EN 12312-10:2005



EN 12312-10:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.6 3 Terms and definitions.6 4 List of hazards.6 5 Safety requirements and/or measures.7 5.1 General requirements.7 5.2 Platform design, guide rails and stops.7 5.3 Operation.8 5.4 Transportability.8 5.5 Drive systems and mobility.8 5.6 Driver's accommodation.8 5.7 Emergency stops.9 5.8 Operating speeds.9 5.9 Options.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.