EN 14954:2005
(Main)Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas
This European Standard specifies a method for the determination of hardness of natural turf and unbound mineral surfaces.
Sportböden - Bestimmung der Härte von Naturrasen und ungebundenen mineralischen Belägen für Sportböden für den Außenbereich
Sols sportifs - Détermination de la dureté du gazon naturel et des sols minéraux non liés pour les terrains de sport de plein air
La présente Norme européenne spécifie une méthode d’essai permettant de déterminer la dureté du gazon
naturel et des sols minéraux non liés.
Površine za športne dejavnosti – Ugotavljanje trdote naravne trave in oblog iz nevezanih mineralov za zunanje športne dejavnosti
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2006
Površine za športne dejavnosti – Ugotavljanje trdote naravne trave in oblog iz
nevezanih mineralov za zunanje športne dejavnosti
Surfaces for sports areas - Determination of hardness of natural turf and unbound
mineral surfaces for outdoor sports areas
Sportböden - Bestimmung der Härte von Naturrasen und ungebundenen mineralischen
Belägen für Sportböden für den Außenbereich
Sols sportifs - Détermination de la dureté du gazon naturel et des sols minéraux non liés
pour les terrains de sport de plein air
Ta slovenski standard je istoveten z: EN 14954:2005
ICS:
97.220.10 Športni objekti Sports facilities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 14954
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 97.220.10
English Version
Surfaces for sports areas - Determination of hardness of natural
turf and unbound mineral surfaces for outdoor sports areas
Sols sportifs - Détermination de la dureté du gazon naturel Sportböden - Bestimmung der Härte von Naturrasen und
et des sols minéraux non liés pour les terrains de sport de ungebundenen mineralischen Belägen für Sportböden für
plein air den Außenbereich
This European Standard was approved by CEN on 12 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14954:2005: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Scope .4
2 Principle.4
3 Apparatus .4
4 Procedure .4
5 Number and distribution of readings .5
6 Expression of results.5
7 Test report .5
Bibliography.7
Foreword
This European Standard (EN 14954:2005) has been prepared by Technical Committee CEN/TC 217
“Surfaces for sports areas”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by May 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.