EN 17467:2022

Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load

This document specifies a test method for the determination of the residual deformation and visual inspection of synthetic or organic granules used in synthetic turf for sports surfaces after static load.

Sportböden - Prüfverfahren zur Bestimmung der Restverformung von synthetischen oder organischen Einstreugranulaten nach statischer Belastung

Dieses Dokument legt ein Prüfverfahren für die Bestimmung der Restverformung und Sichtprüfung von synthetischen oder organischen Granulaten in Kunststoffrasen für Sportböden nach statischer Belastung fest.

Sols sportifs - Méthode d'essai de détermination de la déformation résiduelle de granulats de remplissage synthétiques ou organiques après application d'une charge statique

Le présent document spécifie une méthode d’essai pour la détermination de la déformation résiduelle et l’examen visuel des granulats synthétiques ou organiques, utilisés dans les sols sportifs en gazon synthétique après application d’une charge statique.

Podloge za športne dejavnosti - Preskusna metoda za ugotavljanje rezidualne deformacije umetnih ali organskih polnil po statični obremenitvi

Ta dokument opisuje preskusno metodo za ugotavljanje rezidualne deformacije in vizualni pregled umetnih ali organskih polnil po statični obremenitvi, ki se uporabljajo v sintetični travi za športne površine.

General Information

• Status: Published
• Publication Date: 22-Mar-2022
• Withdrawal Date: 29-Sep-2022
• ICS: 97.220.10 - Sports facilities
• Technical Committee: CEN/TC 217 - Surfaces for sport areas
• Drafting Committee: CEN/TC 217/WG 11 - Test methods for sports surfaces.
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 23-Mar-2022
• Due Date: 02-Nov-2021
• Completion Date: 23-Mar-2022
• Ref Project: SIST EN 17467:2022 - Surfaces for sports areas - Test method for the determination of the residual deformation of synthetic or organic infill granules after static load

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2022
Podloge za športne dejavnosti - Preskusna metoda za ugotavljanje rezidualne
deformacije umetnih ali organskih polnil po statični obremenitvi
Surfaces for sports areas - Test method for the determination of the residual deformation
of synthetic or organic infill granules after static load
Sportböden - Prüfverfahren zur Bestimmung der Restverformung von synthetischen oder
organischen Einstreugranulaten nach statischer Belastung
Sols sportifs - Méthode d'essai de détermination de la déformation résiduelle de
granulats de remplissage synthétiques ou organiques après application d'une charge
statique
Ta slovenski standard je istoveten z: EN 17467:2022
ICS:
97.220.10 Športni objekti Sports facilities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17467
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 97.220.10
English Version
Surfaces for sports areas - Test method for the
determination of the residual deformation of synthetic or
organic infill granules after static load
Sols sportifs - Méthode d'essai de détermination de la Sportböden - Prüfverfahren zur Bestimmung der
déformation résiduelle de granulats de remplissage Restverformung von synthetischen oder organischen
synthétiques ou organiques après application d'une Einstreugranulaten nach statischer Belastung
charge statique
This European Standard was approved by CEN on 24 January 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17467:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Safety . 4
5 Method . 5
5.1 Test equipment . 5
5.2 Test samples . 5
5.3 Conditioning . 5
5.4 Test procedure . 6
6 Calculation and expression of results . 7
7 Test report . 7
European foreword
This document (EN 17467:2022) has been prepared by Technical Committee CEN/TC 217 “Surfaces for
sports areas”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards shall
be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This document specifies a test method for the determination of the residual deformation and visual
inspection of synthetic or organic granules used in synthetic turf for sports surfaces after static load.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 932-2, Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
EN 933-1, Tests for geom
...