Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices

1.1   This standard deals with power operated temporarily installed builders hoists intended for use by persons who are permitted to enter sites of engineering and construction, serving either one upper landing or a work area extending to the end of the guides, (e.g. a roof) having a load carrying device (lcd):
-   which is intended for the transportation of goods only;
-   where it is forbidden for persons to step upon it at any time;
-   which is guided;
-   which is designed to travel at an angle of at least 30 degrees to the vertical but may be used at any angle between the vertical and the maximum inclination as specified by the manufacturer;
-   which is sustained by steel wire rope and a positive drive system;
-   which is controlled by hold-to-run controls by the operator;
-   which does not benefit from the use of any counterweight;
-   which has a maximum rated load of 300 kg;
-   which has a maximum speed of 1,00 m/s;
and where the guides require support from separate structures.
1.2   The standard identifies hazards as listed in clause 4, which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.
1.3   This European standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   noise.
(...)

Bauaufzüge für den Materialtransport - Teil 2: Schrägaufzüge mit nicht betretbaren Lastaufnahmemitteln

1.1   Diese Norm behandelt kraftbetriebene, vorübergehend errichtete Bauaufzüge, die für die Benutzung durch Personen bestimmt sind, denen das Betreten von Baustellen und technischen Anlagen erlaubt ist. Die Aufzüge bedienen entweder eine obere Ladestelle oder einen Arbeitsbereich, der am Ende der Schienen liegt (z. B. ein Dach), und haben ein Lastaufnahmemittel,
- das nur für den Materialtransport vorgesehen ist;
- das niemals von Personen betreten werden darf;
- das geführt wird;
- das für die Fahrt in einem Winkel von mindestens 30 Grad zur Vertikalen konstruiert ist, jedoch bei jedem Winkel eingesetzt werden kann, der zwischen der Vertikalen und der maximalen vom Hersteller erlaubten Neigung liegt;
- das durch ein Drahtseil und ein formschlüssiges Antriebssystem gehalten wird;
- das vom Bediener mit einer Steuerung ohne Selbsthaltung gefahren wird;
- bei dem kein Gegengewicht verwendet wird;
- das eine Nennlast von höchstens 300 kg hat;
- das eine Geschwindigkeit von höchstens 1,00 m/s hat.
und wo die Schienen durch separate Konstruktionen gestützt werden.
1.2   Die Norm beschreibt sowohl Gefährdungen, die während der Lebensdauer eines solchen Gerätes entstehen (siehe Abschnitt 4) als auch Methoden zur Beseitigung oder Verringerung dieser Gefährdungen, soweit die Maschine bestimmungsgemäß verwendet wird.
1.3   Diese Europäische Norm beschreibtenthält keine zusätzlichen Anforderungen für
- den Betrieb unter erschwerten Bedingungen (z. B. in extremen Klimazonen oder bei starken magne¬tischen Feldern);
- den Blitzschutz;
- den Betrieb unter besonderen Anforderungen (z. B. in explosionsgefährdeten Bereichen);
- die elektromagnetische Verträglichkeit (Störaussendung, Störfestigkeit);
- den Umgang mit Gütern, deren Eigenschaften zu einer gefährlichen Situation führen können (z. B. Schmelzen, Säuren/Basen, strahlende Materialien, leicht zerbrechliche Lasten);
- die Verwendung von Verbrennungsmotoren;
(...)

Monte-matériaux - Partie 2: Monte-matériaux inclinés à dispositifs porte-charge non accessible

1.1   La présente norme traite des élévateurs de chantier motorisés, installés temporairement, (appelés «montes-matériaux» par la suite) destinés à être utilisés par des personnes autorisées à pénétrer sur des sites industriels et des chantiers, desservant soit un palier supérieur, soit une zone de travail s'étendant jusqu'aux extrémités des guides (par exemple un toit) et possédant un dispositif porte-charge (dpc) :
-   qui est conçu pour le transport de matériaux uniquement ;
-   auquel l'accès des personnes est tout le temps interdit ;
-   qui est guidé ;
-   qui est conçu pour se déplacer à un angle d'au moins 30° par rapport à la verticale mais peut être utilisé à tout angle entre la verticale et l’inclinaison maximale spécifiée par le fabricant ;
-   qui est soutenu par un système à câble et à entraînement positif ;
-   qui est commandé par des commandes à action maintenue par l’opérateur ;
-   qui ne bénéficie de l'utilisation d'aucun contrepoids ;
-   qui a une charge nominale maximale de 300 kg ;
-   qui a une vitesse maximale de 1,00 m/s ;
et où les guides nécessitent le soutien de constructions distinctes.
1.2   La norme identifie des risques répertoriés dans l'article 4, apparaissant au cours des diverses phases de la vie d'un tel équipement et décrit des méthodes pour supprimer ou réduire ces risques, à condition que l’appareil soit utilisé comme prévu par le fabricant.
1.3   La présente norme européenne ne spécifie pas les prescriptions complémentaires pour :
-   l'utilisation du monte-matériaux dans des conditions particulièrement difficiles (par exemple, dans des zones climatiques extrêmes ou en cas de champs magnétiques forts) ;
-   la protection antifoudre ;
-   l'utilisation avec des exigences exceptionnelles (par exemple, dans des atmosphères où il y a un risque d'explosion) ;
-   la compatibilité électromagnétique (émission, immunité) ;

Gradbena dvigala za prevoz materiala - 2. del: Poševna dvigala z nedostopnim sredstvom za prevoz tovora (vključno z dopolnilom A1)

Ta standard obravnava začasno nameščena električna gradbena dvigala, namenjena osebam, ki lahko vstopajo na delovišča in gradbišča, s pripustom ene zgornje nakladalne ali delovne površine, ki sega do konca vodila (npr. strehe) in ima napravo za nošenje tovora (lcd): - ki so namenjena le prevozu materiala; - pri katerih je osebam stalno prepovedan vstop; - ki so vodena; - ki so namenjena potovanju pod kotom vsaj 30 stopinj odmika od navpičnice, vendar se lahko uporabljajo pod katerim koli kotom med navpičnico in največjim nagibom, kot določi proizvajalec; - ki jih nosi jeklena vrv in pozitivni pogonski sistem; - ki jih operater nadzoruje s pridržitvenim krmiljenjem; - ki nimajo protiuteži; - ki imajo maksimalno nazivno obremenitev 300 kg; - ki imajo maksimalno hitrost 1,00 m/s; in pri katerih vodila potrebujejo podporo ločenih konstrukcij. Ta standard opredeljuje nevarnosti, navedene v Klavzuli 4, ki nastanejo med različnimi fazami življenjske dobe take opreme, in opisuje metode za odpravo ali zmanjšanje teh nevarnosti, kadar se oprema uporablja kot predvideno s strani proizvajalca. Varnostne zahteve in/ali ukrepi tega standarda obravnavajo zasnovo nosilnega okvira, vodilnih tračnic, sredstev za prevoz tovora, pogonske enote, električnih in/ali hidravličnih instalacij in nadzor dvigala. Vključena je zasnova opor za vodilne tračnice, ne pa zasnova podpornih konstrukcij (npr. zgradbe ali odra) in vezi. Druge vidike, kot so nosilni ograjeni prostor, zasnova postavitve podlage iz betona, trdega jedra, lesa ali drugega materiala, zaščita jaška in zgornje nakladalne površine, obravnava priročniški del tega standarda.

General Information

Status
Published
Publication Date
20-Jul-2010
Withdrawal Date
30-Jan-2011
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
04-Jun-2019
Completion Date
04-Jun-2019

Relations

Buy Standard

Standard
EN 12158-2:2002+A1:2010
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QHGRVWRSQLPBauaufzüge für den Materialtransport - Teil 2: Schrägaufzüge mit nicht betretbaren LastaufnahmemittelnMonte-matériaux - Partie 2: Monte-matériaux inclinés à dispositifs porte-charge non accessibleBuilders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices53.020.99Druga dvigalna opremaOther lifting equipmentICS:Ta slovenski standard je istoveten z:EN 12158-2:2000+A1:2010SIST EN 12158-2:2002+A1:2010en,fr,de01-oktober-2010SIST EN 12158-2:2002+A1:2010SLOVENSKI
STANDARDSIST EN 12158-2:20021DGRPHãþD



SIST EN 12158-2:2002+A1:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12158-2:2000+A1
July 2010 ICS 91.140.90 Supersedes EN 12158-2:2000English Version
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
Monte-matériaux - Partie 2: Monte-matériaux inclinés à dispositifs porte-charge non accessible
Bauaufzüge für den Materialtransport - Teil 2: Schrägaufzüge mit nicht betretbaren LastaufnahmemittelnThis European Standard was approved by CEN on 9 September 2000 and includes Amendment 1 approved by CEN on 12 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12158-2:2000+A1:2010: ESIST EN 12158-2:2002+A1:2010



EN 12158-2:2000+A1:2010 (E) 2 Contents Page Foreword .3Introduction .41Scope .42Normative references .63Terms and definitions .74List of hazards .85Safety requirements and/or measures . 106Verification . 257User Information . 29Annex A (normative)
European stormwind map . 36Annex B (informative)
!Electric safety devices" . 37Annex ZA (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" . 38Bibliography . 39 SIST EN 12158-2:2002+A1:2010



EN 12158-2:2000+A1:2010 (E) 3 Foreword This document (EN 12158-2:2000+A1:2010) has been prepared by Technical Committee CEN/TC 10 "Lifts, escalators and moving walks", the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.