EN 12046-1:2020

Operating forces - Test method - Part 1: Windows

This document specifies the test method for determining the force required when engaging or releasing the hardware of a window and when commencing the movement of a casement or sash, in both opening and closing directions.
This document is applicable to all types of openable windows where the movement is a manual operation.
This document is applicable to products of any frame material.

Bedienkräfte - Prüfverfahren - Teil 1: Fenster

Dieses Dokument legt das Prüfverfahren zur Ermittlung der Kraft fest, die für das Einrasten und Freigeben von Fensterbeschlägen und zur Einleitung der Bewegung eines Flügelrahmens oder Schiebeflügels sowohl in Öffnungs- als auch in Schließrichtung erforderlich ist.
Dieses Dokument gilt für alle Bauarten von öffenbaren Fenstern, bei denen die Bewegung durch Handbetätigung erfolgt.
Dieses Dokument ist auf Produkte aller Rahmenwerkstoffe anwendbar.

Forces de manoeuvre - Méthode d'essai - Partie 1 : Fenêtre

La présente Norme européenne définit la méthode d'essai permettant de déterminer la force nécessaire à l’engagement et au relâchement de la quincaillerie d’une fenêtre lorsque l’on amorce le mouvement des vantaux tant dans la direction d’ouverture que de fermeture.
La presente norme est applicable à tout type de fenêtre pouvant s’ouvrir pour lequel le mouvement du vantail est manuel.
La présente Norme européenne s’applique aux produits quel que soit le matériau du cadre.

Sile pri uporabi - Preskusna metoda - 1. del: Okna

General Information

• Status: Published
• Publication Date: 18-Aug-2020
• Withdrawal Date: 27-Feb-2021
• ICS: 91.060.50 - Doors and windows
• ICS: 91.190 - Building accessories
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 1/2 - Windows and doors
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Aug-2020
• Due Date: 08-Aug-2020
• Completion Date: 19-Aug-2020
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Ref Project: SIST EN 12046-1:2020 - Operating forces - Test method - Part 1: Windows

Relations

• Replaces: EN 12046-1:2003 - Operating forces - Test method - Part 1: Windows
• Effective Date: 26-Aug-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12046-1:2020
01-oktober-2020
Nadomešča:
SIST EN 12046-1:2004
Sile pri uporabi - Preskusna metoda - 1. del: Okna
Operating forces - Test method - Part 1: Windows
Bedienkräfte - Prüfverfahren - Teil 1: Fenster
Forces de manoeuvre - Méthode d'essai - Partie 1 : Fenêtres
Ta slovenski standard je istoveten z: EN 12046-1:2020
ICS:
91.060.50 Vrata in okna Doors and windows
SIST EN 12046-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12046-1:2020

---------------------- Page: 2 ----------------------
SIST EN 12046-1:2020


EN 12046-1
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 91.060.50; 91.190 Supersedes EN 12046-1:2003
English Version

Operating forces - Test method - Part 1: Windows
Forces de manoeuvre - Méthode d'essai - Partie 1 : Bedienkräfte - Prüfverfahren - Teil 1: Fenster
Fenêtre
This European Standard was approved by CEN on 12 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12046-1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12046-1:2020
EN 12046-1:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle of test . 4
5 Apparatus . 5
5.1 Test rig . 5
5.2 Linear motion . 7
5.3 Rotary motion . 7
6 Test specimen . 7
7 Conditioning and preparation of the test specimen . 8
7.1 Conditioning . 8
7.2 Preparation . 8
8 Procedure. 8
8.1 Test sequence .
...