Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability tests in a borehole using closed systems (ISO 22282-6:2012)

ISO 22282-6:2012 specifies requirements for the determination of the local permeability in soils and rocks below or above the groundwater table in a closed system by the water permeability tests as part of the geotechnical investigation services according to EN 1997-1 and EN 1997-2.

Geotechnische Erkundung und Untersuchung - Geohydraulische Versuche - Teil 6: Wasserdurchlässigkeitsversuche im Bohrloch unter Anwendung geschlossener Systeme (ISO 22282-6:2012)

Dieser Teil von ISO 22282 legt Anforderungen an die Bestimmung der örtlichen Durchlässigkeit in Locker- und Festgesteinen unter  oder oberhalb des Grundwasserspiegels in einem geschlossenen System mit Hilfe von Wasserdurchlässigkeitsversuchen als Teil von geotechnischen Erkundungsdiensten nach EN 1997 1 und EN 1997 2 fest.
Die Versuche dienen dazu, den Durchlässigkeitsbeiwert k in schwach durchlässigen Locker- und Festgesteinen mit weniger als 10,8 m/s zu bestimmen. Sie können auch angewendet werden, um die Transmissivität T und den Speicherkoeffizienten S zu bestimmen.
ANMERKUNG   Der Wasserdruckversuch in Fels wird in ISO 22282 3 behandelt.

Reconnaissance et essais géotechniques - Essais géohydrauliques - Partie 6: Essais de perméabilité à l'eau dans un forage en tube fermé (ISO 22282-6:2012)

Geotehnično preiskovanje in preskušanje - Hidrogeološke preiskave - 6. del: Ugotavljanje vodoprepustnosti v vrtini z uporabo zaprtih sistemov (ISO 22282-6:2012)

Ta del standarda ISO 22282 opredeljuje zahteve za določitev lokalne propustnosti v tleh in kamninah pod podtalnico in nad njo v zaprtih sistemih, in sicer s preizkusi propustnosti vode, kot del geotehničnih raziskovalnih storitev v skladu s standardoma EN 1997-1 in EN 1997-2.

General Information

Status
Published
Publication Date
31-May-2012
Withdrawal Date
30-Dec-2012
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Jun-2012
Due Date
17-Oct-2012
Completion Date
01-Jun-2012

Buy Standard

Standard
EN ISO 22282-6:2012
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22282-6:2012
01-december-2012
*HRWHKQLþQRSUHLVNRYDQMHLQSUHVNXãDQMH+LGURJHRORãNHSUHLVNDYHGHO
8JRWDYOMDQMHYRGRSUHSXVWQRVWLYYUWLQL]XSRUDER]DSUWLKVLVWHPRY ,62

Geotechnical investigation and testing - Geohydraulic testing - Part 6: Water permeability
tests in a borehole using closed systems (ISO 22282-6:2012)
Geotechnische Erkundung und Untersuchung - Geohydraulische Versuche - Teil 6:
Wasserdurchlässigkeitsversuche im Bohrloch unter Anwendung geschlossener Systeme
(ISO 22282-6:2012)
Reconnaissance et essais géotechniques - Essais géohydrauliques - Partie 6: Essai de
perméabilité à l'eau dans un forage en tube fermé (ISO 22282-6:2012)
Ta slovenski standard je istoveten z: EN ISO 22282-6:2012
ICS:
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN ISO 22282-6:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 22282-6:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 22282-6:2012


EUROPEAN STANDARD
EN ISO 22282-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2012
ICS 93.020
English Version
Geotechnical investigation and testing - Geohydraulic testing -
Part 6: Water permeability tests in a borehole using closed
systems (ISO 22282-6:2012)
Reconnaissance et essais géotechniques - Essais Geotechnische Erkundung und Untersuchung -
géohydrauliques - Partie 6: Essais de perméabilité à l'eau Geohydraulische Versuche - Teil 6:
dans un forage en tube fermé (ISO 22282-6:2012) Wasserdurchlässigkeitsversuche im Bohrloch unter
Anwendung geschlossener Systeme (ISO 22282-6:2012)
This European Standard was approved by CEN on 31 May 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22282-6:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 22282-6:2012
EN ISO 22282-6:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 22282-6:2012
EN ISO 22282-6:2012 (E)
Foreword
This document (EN ISO 22282-6:2012) has been prepared by Technical Committee CEN/TC 341
“Geotechnical Investigation and Testing", the secretariat of which is held by ELOT, in collaboration with
Technical Committee ISO/TC 182 "Geotechnics".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2012, and conflicting national standards shall be withdrawn
at the latest by December 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 22282-6:2012

---------------------- Page:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.