EN 1870-9:2000+A1:2009
(Main)Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
This document deals with the significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading, hereinafter referred to as 'machines', designed to cut solid wood, chipboard, fibreboard, plywood and also these materials when covered with plastic edging and/or plastic/light alloy laminate.
This European Standard does not apply to:
- machines for cross cutting logs;
- double blade up-cutting cross-cut sawing machines.
For Computer Numerically Controlled (CNC) machines, this European Standard does not cover the hazards related to Electromagnetic Compatibility (EMC).
This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard.
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 9: Doppelgehrungskreissägemaschinen mit mechanischem Vorschub und Handbeschickung und/oder Handentnahme
!Dieses Dokument behandelt alle im Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefähr¬dungs-situationen und Gefährdungsereignisse, die auf Doppelgehrungskreissägemaschinen mit mechanischem Vorschub und Handbeschickung und/oder Handentnahme zutreffen, im Folgenden als Maschinen bezeichnet, die konstruiert sind zum Schneiden von Massivholz, Spanplatten, Faserplatten, Sperrholz, sowie diesen Werkstoffen, wenn sie mit Kunststoffkanten versehen und/oder kunststoff-/aluminium-beschichtet sind."
Diese Europäische Norm gilt nicht für:
Maschinen zum Querschneiden von Rundholz;
von unten schneidende Querschnittkreissägemaschinen mit 2 Sägeblättern.
!gestrichener Text"
Diese Europäische Norm behandelt bei CNC Maschinen nicht die Gefährdungen im Zusammenhang mit der elektromagnetischen Verträglichkeit (EMV).
Diese Europäische Norm ist in erster Linie auf Maschinen anzuwenden, die nach dem Datum der Herausgabe dieser Europäischen Norm hergestellt sind.
Sécurité des machines pour le travail du bois - Machines à scie circulaire - Partie 9: Machines à scier à deux lames de scie circulaires, pour tronçonnage, à avance mécanisée et à chargement et/ou déchargement manuels
Le présent document traite de tous les phénomènes, situations et événements dangereux significatifs, tels
qu’énumérés à l’Article 4, applicables aux tronçonneuses bilames, à avance mécanisée et à chargement et/ou
déchargement manuel, ci-après désignées «machines», conçues pour la coupe de bois massif, des panneaux de
particules et de fibres, du contre-plaqué, ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont
recouverts de matière plastique et/ou de plastique/alliage léger stratifié."
La présente norme européenne ne s'applique pas aux :
- machines pour le tronçonnage de grumes ;
- tronçonneuses à deux lames à coupe ascendante.
texte supprimé"
Pour les machines à commande numérique (CN), la présente norme européenne ne traite pas les phénomènes
dangereux relatifs à la compatibilité électromagnétique (CEM).
La présente norme européenne est applicable avant tout aux machines fabriquées après la date de publication de la
présente norme.
Varnost lesnoobdelovalnih strojev - Krožne žage - 9. del: Dvolistne krožne žage za prečni prerez z vgrajenim podajalnikom ter z ročnim podajanjem in/ali odvzemom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 9: Doppelgehrungskreissägemaschinen mit mechanischem Vorschub und Handbeschickung und/oder HandentnahmeSécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 9: Machines à scier à deux lames de scie circulaires, pour tronçonnage, à avance mécanisée et à chargement et/ou déchargement manuelsSafety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading79.120.10Lesnoobdelovalni strojiWoodworking machines25.080.60Strojne žageSawing machinesICS:Ta slovenski standard je istoveten z:EN 1870-9:2000+A1:2009SIST EN 1870-9:2000+A1:2009en01-november-2009SIST EN 1870-9:2000+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1870-9:2000+A1
September 2009 ICS 79.120.10 Supersedes EN 1870-9:2000English Version
Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 9: Machines à scier à deux lames de scie circulaires, pour tronçonnage, à avance mécanisée et à chargement et/ou déchargement manuels
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 9: Doppelgehrungskreissägemaschinen mit mechanischem Vorschub und Handbeschickung und/oder HandentnahmeThis European Standard was approved by CEN on 1st March 2000 and includes Amendment 1 approved by CEN on 6 August 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1870-9:2000+A1:2009: ESIST EN 1870-9:2000+A1:2009
Dimensional tolerances of saw spindles . 35Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""" . 37Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 38 SIST EN 1870-9:2000+A1:2009
1 Scope !This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading, hereinafter referred to as 'machines', designed to cut solid wood, chipboard, fibreboard, plywood and also these materials when covered with plastic edging and/or plastic/light alloy laminate." This European Standard does not apply to: machines for cross cutting logs; double blade up-cutting cross-cut sawing machines. !deleted text" For Computer Numerically Controlled (CNC) machines, this European Standard does not cover the hazards related to Electromagnetic Compatibility (EMC). This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard. 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. " !deleted text" EN 574:1996, Safety of machinery — Two hand control devices — Functional aspects — Principles for design !EN 614-1:2006, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles" SIST EN 1870-9:2000+A1:2009
EN 60529:1991, Degrees of protection provided by enclosures (IP Code) !(IEC 60529:1989)" !EN 60825-1:2007, Safety of laser products — Part 1: Equipment classification and requirements (IEC 60825-1:2007) " !EN 60947-4-1:2001, Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters (IEC 60947-4-1:2000) " !EN 60947-5-1:2004", Low voltage switchgear and control gear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices !(IEC 60947-5-1:2003)" !EN 61310-1:2008, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007) " SIST EN 1870-9:2000+A1:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.