iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1143-2:2001

(Main)

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 2: Deposit systems

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 2: Deposit systems

This European Standard specifies requirements and tests for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits.
The standard includes design requirements for deposit systems controlled by programmable controllers.  In this European Standard, controller hardware testing is restricted to electric motors, sensors, coils and similar devices; software testing is not part of this standard.
Deposit systems may have devices for functions such as user identification and/or counting and registration of money. Tests and classification of such functions are not included in this European Standard.
This European Standard does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the system.

Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Teil 2: Deposit-Systeme

Diese Europäische Norm legt Anforderungen und Prüfungen für Deposit-Systeme fest und klassifiziert die Systeme nach ihrem  Widerstand gegen Einbruchdiebstahl und Diebstahl der Deposits.
Die Norm legt Konstruktionsanforderungen für Deposit-Systeme fest, die programmierbare Steuerungen beinhalten. In dieser Europäischen Norm ist die Prüfung der Steuerungshardware auf elektrische Motoren, Sensoren, Spulen und ähnliche Bauteile beschränkt. Softwareprüfungen sind nicht Teil dieser Norm.
Deposit-Systeme können über Bauteile verfügen, die Funktionen, wie z. B. Nutzeridentifikation bzw. Zählen/Registrieren von Geld, steuern. Prüfungen und die Klassifizierung dieser Funktionen sind nicht Gegenstand dieser Europäischen Norm.
Diese Europäische Norm behandelt nicht den Schutz von Personen, die das Deposit-System nutzen oder den Schutz vor Betrug durch das Bedienpersonal.

Unités de stockage en lieux sûrs - Exigences, classification et méthodes d' essai pour la résistance à l'effraction - Partie 2: Systèmes de dépôt

La présente Norme européenne spécifie les exigences et les essais relatifs aux systèmes de dépôt et établit le classement de ces systèmes en fonction de leur résistance à l'effraction et de leur résistance au vol des dépôts.
La présente norme inclut des exigences relatives à la conception des systèmes de dépôt contrôlés par des contrôleurs programmables. Dans la présente norme européenne, l'essai relatif au matériel du contrôleur est restreint aux moteurs électriques, aux capteurs, aux bobines et dispositifs similaires ; l'essai portant sur le logiciel ne fait pas partie de la présente norme européenne.
Les systèmes de dépôt peuvent être équipés de dispositifs de fonctionnement comme des moyens permettant d'identifier l'utilisateur et/ ou de compter et d'enregistrer l'argent. Les essais et classifications portant sur de telles fonctions ne sont pas traités dans la présente norme européenne.
La présenteNorme européenne ne traite pas de la sécurité des personnes utilisant les systèmes de dépôt, ni de la prévention de fraude commise par les opérateurs du système.

Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - 2. del: Depozitni sistemi

General Information

Status
Withdrawn
Publication Date
11-Dec-2001
Withdrawal Date
06-May-2014
ICS
13.310 - Protection against crime
Technical Committee
CEN/TC 263 - Secure storage of cash, valuables and data media
Drafting Committee
CEN/TC 263/WG 1 - Burglary resistance
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
07-May-2014
Completion Date
07-May-2014
Ref Project
SIST EN 1143-2:2002 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 2: Deposit systems

Relations

Replaced By
EN 1143-2:2014 - Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
Effective Date
13-May-2014

Buy Standard

EN 1143-2:2002EN 1143-2:2002
PreviousNext
Standard
EN 1143-2:2002
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - 2. del: Depozitni sistemiWertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Teil 2: Deposit-SystemeUnités de stockage en lieux surs - Exigences, classification et méthodes d' essai pour la résistance a l'effraction - Partie 2: Systemes de dépôtSecure storage units - Requirements, classification and methods of test for resistance to burglary - Part 2: Deposit systems35.220.99Druge naprave za shranjevanje podatkovOther data storage devices13.310Varstvo pred kriminalomProtection against crimeICS:Ta slovenski standard je istoveten z:EN 1143-2:2001SIST EN 1143-2:2002de01-september-2002SIST EN 1143-2:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1143-2December 2001ICS 13.310English versionSecure storage units - Requirements, classification and methodsof test for resistance to burglary - Part 2: Deposit systemsUnités de stockage en lieux sûrs - Prescriptions,classification et méthodes de test pour la résistance àl'effraction - Partie 2: Systèmes de dépôtWertbehältnisse - Anforderungen, Klassifizierung undMethoden zur Prüfung des Widerstandes gegenEinbruchdiebstahl - Teil 2: Deposit-SystemeThis European Standard was approved by CEN on 8 November 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1143-2:2001 ESIST EN 1143-2:2002

(see also Table B.2).237.7Test procedure.257.8Measurement of operating time.267.9Calculation of resistance values.277.10Test record.278Anchoring system test of deposit systems.278.1Deposit safes.278.1.1Principle.278.1.2Loading equipment.288.1.3Test criterion.298.1.4Test procedure.298.1.5Expression of test results.298.2Test of the anchoring system of night safes.298.2.1Principle.298.2.2Equipment.298.2.3Test criterion.308.2.4Test procedure.308.2.5Expression of results.318.3Tool attack test on night safe receiving unit fixing attachments.318.3.1Principle.318.3.2Test criterion.318.3.3Test procedure.318.3.4Expression of results.319Explosive tests of EX-designated deposit systems.319.1General.319.2Explosive tests on receiving units.319.2.1Principle.319.2.2Test specimen.329.2.3Explosives.329.2.4Explosive charge mass.329.2.5Test criterion.329.2.6Test procedure.329.3Explosive tests on deposit systems.339.3.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1143-2:2024(Main)
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
SIST EN 1143-2:2024

This document specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits.
This document comprises two types of deposit system:
—   Night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe.
—   Deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to the content of the deposit safe. The installation condition for deposit safe according to this document is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company.
NOTE   Parts of a deposit system are a receiving unit, an input unit and in some cases, a chute.
This document includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensors, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this document.
Deposit systems can have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for classification of such functions are not included.
This document does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14450:2017+A1:2023(Main + Amendment)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
SIST EN 14450:2018+A1:2024

This document establishes the basis for testing and classifying secure cabinets.
The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1300:2023(Main)
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
SIST EN 1300:2023

This document specifies requirements for high security locks (HSL) for reliability, resistance to burglary and manipulation with methods of testing. It also provides a scheme for classifying HSL in accordance with their assessed resistance to burglary and unauthorized opening.
It is applicable to mechanical and electronic HSL. For electronic locks used in a distributed system, see EN 17646 for further information.
The following features can be included as optional subjects but they are not mandatory:
a)   recognized code for preventing code altering and/or enabling/disabling parallel codes;
b)   recognized code for disabling time set up;
c)   integration of alarm components or functions;
d)   resistance to attacks with acids;
e)   resistance to X-rays;
f)   resistance to explosives;
g)   time functions.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15713:2023(Main)
Secure destruction of confidential and sensitive material - Code of practice
SIST EN 15713:2023

This document provides recommendations and requirements for the procedures, processes and performance monitoring to be implemented for the management and control of the physical destruction of confidential and sensitive material to ensure that such material is disposed of securely and safely.
This document can be referenced by anyone who processes such material on behalf of others and covers the following scenarios:
-   on site - using mobile equipment at the location of use (destruction equipment is brought to the confidential or sensitive material);
-   off site - transport followed by destruction using equipment at a destruction facility (the confidential or sensitive material is brought to the destruction equipment, such as used at a dedicated external facility operated by a service provider);
-   use of equipment at the Data Controller’s location (confidential or sensitive material and destruction equipment co-located, such as a shredder in a building occupied by a client or clients).
Destruction by erasure (e.g. crypto erasure, data overwriting, degaussing or other forms of magnetic/electronic erasure) is not covered in this document.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17646:2022(Main)
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening - Distributed systems
SIST EN 17646:2022

This document is applicable to Distributed Systems (DS), i.e. high security locks with components which have a wired or wireless connection via a transmission system in order to execute fixed operating conditions using different individually fixed access possibilities.
Products which are to be tested on the basis of this document comply with the generally recognized state of the art at the time of testing. Due to the short innovation cycles in the field of electronic and, in particular, information technology applications, the technical possibilities available at the time of product development should also be taken into account during implementation.
Distributed systems can be used, for example, to operate high security locks of secure storage units (safes and strongrooms).
High security locks (HSL) are used in DS as locking unit.
This document does not apply for stand-alone HSL, which are not part of a distributed system. For these stand-alone HSL EN 1300 is applicable only.
The document will be revised with a frequency of 3 years as the research in the area of cryptography and relevant attacks evolve with high speed as well as the referenced standards.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1047-1:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and data inserts
SIST EN 1047-1:2019

This document specifies requirements for fire resisting data cabinets and diskette inserts.
Two methods of test are specified to determine the ability of fire resisting data cabinets to protect temperature and humidity sensitive contents from the effects of fire: a fire endurance test and a fire shock and impact test. Two levels of fire severity (S 60 and S 120) based upon time of fire exposure; and three protection classes (P, D and DIS) are specified using the maximum temperature increases and humidity values permitted within the storage space of the data cabinet.
Diskette inserts (DI 60 P/DIS and DI 120 P/DIS) are installed in data cabinets of protection class S 60 P or S 120 P, respectively, and subjected to a fire endurance test (see 5.1.2).
Requirements are also specified for test specimens, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the fire resisting data cabinets and diskette inserts from the test results is also given (see Table 1).
Diskette inserts are only installed in data cabinets having the same design as the series of protection class S 60 P and S 120 P, respectively, in which the insert has been tested in using methods defined in 5.1.2. Where several inserts are installed, they are built in one beside the other or one above the other from bottom to top, respectively. The volume and total height of the installed inserts do not exceed 50 % of the total internal volume or 50 % of the internal height, respectively, of the data cabinets into which they are installed. The dimensions of the insert can be adapted by increasing the width and depth to the corresponding dimensions of the data cabinets. A reduction of these dimensions as well as a change of the height is only admitted within the specified tolerance.
The temperature increases during type-tests on data cabinets and diskette inserts will be considered in deciding the permitted diskette insert installations. For a permitted installation, the temperature increase of the intended data cabinet ( ) does not exceed the temperature increase of the tested data cabinet ( ) in which the diskette insert has been type-tested by more than the difference between the maximum value for the diskette insert ( ) and the maximum admissible temperature increase (30 K), i.e   (See example in Annex B).
A description of the installation of the diskette inserts can be given in the technical documentation of the manufacturer.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15659:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units
SIST EN 15659:2019

This document specifies requirements for light fire storage units providing protection against fire.
The method of test is specified to determine the ability of light fire storage units to protect paper media from the effects of fire. Two levels of fire exposure periods (LFS 30 and LFS 60) are specified using the maximum temperature increase permitted within the storage space of the light fire storage unit.
Protection after the fire exposure of 30 min (LFS 30) or 60 min (LFS 60) is not ensured by this document, but by European Standard EN 1047-1. Requirements are also specified for the test specimen, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the light fire storage units from the test results is also given (see Table 1).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1143-1:2019(Main)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
SIST EN 1143-1:2019

This European Standard establishes the basis for testing and classifying free-standing safes, built-in safes (floor and wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to their burglary resistance. This European Standard does not cover testing and classifying Deposit Systems and ATM systems.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1047-2:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
SIST EN 1047-2:2019

This part of the European Standard EN 1047 specifies requirements for data rooms and data containers. It includes a method of test for the determination of the ability of data rooms and data containers to protect temperature and humidity sensitive data media (see 3.5) and hardware systems (see 3.6) from the effects of fire. A test method for measuring the resistance to mechanical stress (impact test) provided by data rooms type B and data containers is also specified.
Requirements are also specified for test specimens, the technical documentation of the test specimens, materials specimens, physical fittings, the correlation of test specimens with the technical documentation and the preparation for type testing, as test procedures as well as the series production.
In addition, a scheme to classify data rooms and data containers from the test results is given (see Table 1).
As well as providing protection against fire, correctly installed data rooms and data containers offer a defined protection against impacts caused by failure during fire of components and objects external to the data room or data container.
Data rooms and data containers having the same design, protection and construction features (type and thickness of construction and protective materials, rebate geometry, lockings, doors, etc.) will only be given the same protection classification as that of the test specimen if the tolerances are within the ranges specified in Clause 7.
NOTE   This European Standard does not regulate the use of data rooms in the meaning of the building laws of the respective countries. In the construction of data rooms, it is advised to consider the respective national requirements.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14450:2017/FprA1(Amendment)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
SIST EN 14450:2018/kprA1:2023

This document establishes the basis for testing and classifying secure safe cabinets.
The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day