EN 13230-5:2002
(Main)Railway applications - Track - Concrete sleepers and bearers - Part 5 : Special elements
Railway applications - Track - Concrete sleepers and bearers - Part 5 : Special elements
This part of this European Standard defines additional technical criteria and control procedures relating to the design and manufacture of special elements.
Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 5 : Sonderformen
Dieser Teil der Europäischen Normenreihe legt die zusätzlichen technischen Kriterien und Prüfverfahren fest, die mit der Konstruktion und Herstellung von Sonderformen zusammenhängen.
Applications ferroviaires - Voie - Traverses et supports en béton - Partie 5 : Eléments spéciaux
La présente partie de la norme européenne définit les autres critères techniques et procédures de contrôle relatives à la conception et à la fabrication des éléments spéciaux.
Železniške naprave – Zgornji ustroj – Betonski pragi in kretniški betonski pragi – 5. del: Posebne oblike pragov
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave – Zgornji ustroj – Betonski pragi in kretniški betonski pragi – 5. del: Posebne oblike pragovBahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 5 : SonderformenApplications ferroviaires - Voie - Traverses et supports en béton - Partie 5 : Eléments spéciauxRailway applications - Track - Concrete sleepers and bearers - Part 5 : Special elements91.100.30Beton in betonski izdelkiConcrete and concrete products45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13230-5:2002SIST EN 13230-5:2004en01-marec-2004SIST EN 13230-5:2004SLOVENSKI
STANDARD
SIST EN 13230-5:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13230-5December 2002ICS 45.080English versionRailway applications - Track - Concrete sleepers and bearers -Part 5 : Special elementsApplications ferroviaires - Voie - Traverses et supports enbéton - Partie 5 : Eléments spéciauxBahnanwendungen - Oberbau - Gleis- undWeichenschwellen aus Beton - Teil 5 : SonderformenThis European Standard was approved by CEN on 9 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13230-5:2002 ESIST EN 13230-5:2004
EN 13230-5:2002 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Definitions.4 4 Requirements.4 5 Product testing.5 6 Manufacturing.5 7 Data to be supplied.5 Annex A (informative)
Definition of special elements - Basic examples.6 A.1 Prestressed concrete special elements.6 A.1.1 Special sleepers.6 A.1.2 Special bearers.6 A.2 Reinforced concrete special elements.6 A.2.1 Special sleepers.6 A.2.2 Blocks for ballastless tracks.7 Bibliography.8
SIST EN 13230-5:2004
EN 13230-5:2002 (E) 3 Foreword This document EN 13230-5:2002 has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2003, and conflicting national standards shall be with
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.