EN 13231-1:2013
(Main)Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings
Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings
This European Standard specifies the minimum technical requirements and the tolerances for the acceptance of works on ballasted track situated on plain line and on switches and crossings and rail expansion devices, as part of the track, for 1 435 mm and wider track gauge railways, concerning construction of new track, track renewal and track maintenance. More particularly, this standard gives the requirements for the documentation of work parameters, for the tolerances for relative track geometry and absolute track position and for the acceptance procedures.
This standard does not deal with contractual and legal aspects and it does not cover either works related to reprofiling the railhead nor the associated measurements, except for some measurements related to safety, since these works are covered by other parts of EN 13231 series.
Related works, e.g. platform reconstruction, formation, drainage, level crossings are not covered by this standard.
Bahnanwendungen - Oberbau - Abnahme von Arbeiten - Teil 1: Arbeiten im Schotteroberbau - Gleise, Weichen und Kreuzungen
Diese Europäische Norm legt die minimalen technischen Anforderungen und die Toleranzen für die Abnahme von Arbeiten im Schotteroberbau für Gleise, Weichen und Kreuzungen und Auszugsvorrichtungen als Teil des Gleises für 1 435 mm und breiteren Spurweiten, der Bau eines neuen Gleises, die Gleiserneuerung und die Gleisinstandhaltung entsprechend, fest. Insbesondere enthält diese Norm die Anforderungen für die Dokumentation der Arbeitsparameter, für die Toleranzen der relativen Gleisgeometrie und absoluten Gleislage und für die Abnahmeverfahren.
Diese Norm behandelt nicht die vertraglichen und gesetzlichen Aspekte und behandelt weder die Arbeiten für die Reprofilierung von Schienenköpfen noch die dazugehörigen Messungen, weil diese Arbeiten in anderen Teilen der Normenreihe EN 13231 behandelt werden.
Ähnliche Arbeiten, z. B. Wiederaufbau von Bahnsteigen und Arbeiten an Planum, Entwässerung und Bahnübergängen werden in dieser Norm nicht behandelt.
Applications ferroviaires - Voie - Réception des travaux - Partie 1: Travaux de voie ballastée - Voie courante et appareils de voie
La présente Norme européenne spécifie les exigences techniques minimales et les tolérances relatives à la réception des travaux de voie courante sur voie ballastée et sur les appareils de voie et les dispositifs de dilatation des rails, faisant partie intégrante de la voie, pour un écartement de rails de 1 435 mm et plus, concernant la pose de voie neuve, le renouvellement et l'entretien des voies. La présente norme spécifie plus particulièrement les exigences relatives à la documentation des paramètres de travail, les tolérances de géométrie relative et de position absolue des voies, et les procédures de réception.
La présente norme ne traite pas des aspects contractuels et légaux et ne couvre ni les travaux liés au reprofilage du champignon de rail ni aux mesures associées, car ces travaux font l'objet d'autres parties de la série EN 13231.
Cette norme ne couvre pas les travaux connexes, par exemple réfection de quai, assainissement, drainage, passages à niveau.
Železniške naprave - Zgornji ustroj - Prevzem del - 1. del: Dela na (zgornjem ustroju) tiru s tirno gredo - Odprta proga, kretnice in križišča
Ta evropski standard določa minimalne tehnične zahteve in odstopanja za prevzem del na (zgornjem ustroju) tiru s tirno gredo na odprti progi in na kretnicah ter križiščih in diletacijskih napravah v okviru zgornjega ustroja s širino proge 1435 mm in z večjo tirno širino v zvezi z izgradnjo novega zgornjega ustroja, njegove obnove in vzdrževanja. Podrobneje, ta standard določa zahteve za dokumentacijo delovnih parametrov, za odstopanja za relativno geometrijo zgornjega ustroja in absolutni položaj zgornjega ustroja ter za postopke za prevzem. Ta standard ne obravnava pogodbenih in pravnih vidikov ter ne zajema del v zvezi z reprofiliranjem ali povezanih meritev, razen nekaterih meritev v zvezi z varnostjo, saj so ta dela obravnavana v drugih delih skupine standardov EN 13231. Povezana dela, npr. obnova ploščadi, formacija, odvodnjavanje in nivojska križišča, niso obravnavana v tem standardu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Oberbau - Abnahme von Arbeiten -
Teil 1: Arbeiten im Schotteroberbau - Gleise, Weichen und KreuzungenApplications ferroviaires - Voie - Réception des travaux - Partie 1: Travaux de voie ballastée - Voie courante et appareils de voieRailway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13231-1:2013SIST EN 13231-1:2013en,fr01-junij-2013SIST EN 13231-1:2013SLOVENSKI
STANDARDSIST EN 13231-2:2006SIST EN 13231-1:20061DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13231-1
May 2013 ICS 93.100 Supersedes EN 13231-1:2006, EN 13231-2:2006English Version
Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings
Applications ferroviaires - Voie - Réception des travaux - Partie 1: Travaux de voie ballastée - Voie courante et appareils de voie
Bahnanwendungen - Oberbau - Abnahme von Arbeiten - Teil 1: Arbeiten im Schotteroberbau - Gleise, Weichen und Kreuzungen This European Standard was approved by CEN on 14 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13231-1:2013: ESIST EN 13231-1:2013
Guidelines for specification of requirements of geodetic measurements . 22 Annex B (informative)
Switches and crossings measurements and checks . 23 Bibliography. 30
Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices NOTE Part 2 does not exist in this series. The following technical modifications have been introduced during the revision: merging of EN 13231-1:2006 and EN 13231-2:2006, taking into account the similarities between them; definition of the absent tolerances for some existing parameters; revision of the tolerances already set up on the former version; definition of new parameters and the respective tolerances. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13231-1:2013
3.3 acceptance declaration of the customer to the contractor that the work has been achieved in accordance with the contract 3.4 tolerance permissible deviation from reference or designed value 3.5 relative track geometry group of parameters defining the position of the rails, usually comprising the following: track gauge, alignment, longitudinal level, twist and cross level
Note 1 to entry: These parameters are described in EN 13848 series. 3.6 design track position position of the track defined in the track design process
Note 1 to entry: The design position is defined in the geodetic reference system. Note 2 to entry: The control of the design studies and layouts for new or upgraded tracks according to EN 13803-1 and EN 13803-2 or other regulations is not part of this standard. 3.7 actual track position position of the track when measured from external absolute references
EXAMPLE Network of geodetic reference points. 3.8 deviation from design track position vertical and lateral difference between the design track position and the actual track position 3.9 nominal track gauge single value which identifies the track gauge but may differ from the design track gauge SIST EN 13231-1:2013
Note 1 to entry: It may differ from nominal track gauge. The design track gauge is specified by the customer taking into account the materials, the method of measurement and whether the application is on plain line or in switches and crossings. 3.11 new track new constructed track applying new materials, including formation
3.12 renewal complete replacement of all the components of the track (rails, sleepers, fastenings, switches and crossings, rail expansion devices and ballast) applying new materials, including the formation if necessary 3.13 partial renewal replacement of one or more (but not all) track components in a track section 3.14 maintenance all other works than design track gauge, new track and renewal 3.15 bearer sleeper for switches and crossings 3.16 stagger deviation in longitudinal relative position between the rail joints in the left and the right rails 4 Acceptance of works on plain line and on switches and crossings and rail expansion devices 4.1 General The requirements of this European Standard apply to works as defined in 3.1, to the extent that they are within the scope of the work. An acceptance form shall be prepared for each item of work outlining the results achieved. Acceptance is not given until the work is completed in accordance with the requirements of the contract. 4.2 Acceptance deadlines Acceptance shall not be carried out until the track has been subjected to an appropriate passing tonnage described and defined by the customer. However, acceptance should occur within a period not exceeding six weeks or after the passage of a maximum of 1,500 000 tonnes after the completion of the works, although the customer may extend this timescale to permit any follow-up tamping to be carried out. SIST EN 13231-1:2013
Before acceptance, the following measurements or checks shall be carried out when applicable (manually or by automatic means), and shall be documented: relative track geometry of plain line, switches and crossings as specified in 4.4; absolute track position of plain line,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.