EN 12369-2:2004

Wood-based panels - Characteristic values for structural design - Part 2: Plywood

This European Standard provides information on the characteristic values for use in designing structures
incorporating wood based panels. The characteristic values given are as defined in ENV 1995-1-1.
This standard includes the characteristic values of the mechanical properties for plywood complying with EN 636 and the requirements of EN 13986 when used in a bending mode.
Advice on obtaining the characteristic values for tension and compression for plywood by either testing or calculation is provided. Conservative values for shear are also included.
Characteristic values for OSB, particleboards and fibreboards are given in EN 12369-1. A further part of the standard for characteristic values of solid wood panels is in preparation.

Holzwerkstoffe - Charakteristiche Werte für die Berechnung und Bemessung von Holzbauwerken - Teil 2: Sperrholz

Diese Europäische Norm gibt Informationen über charakteristische Werte für die Berechnung und Bemessung von Bauwerken, in denen Holzwerkstoffe eingesetzt werden. Die angegebenen charakteristischen Werte entsprechen den Definitionen in ENV 1995-1-1.
Diese Norm enthält die charakteristischen Werte der mechanischen Biege-Eigenschaften von Sperrholz nach EN 636 und EN 13986.
Es werden Hinweise zur Bestimmung der charakteristischen Werte für Zug- und Druckeigenschaften von Sperrholz durch Prüfung oder Berechnung gegeben. Außerdem werden konservative Werte für Schubeigenschaften angegeben.
Charakteristische Werte für OSB, Spanplatten und Faserplatten werden in EN 12369-1 angegeben. Ein weiterer Teil der Norm über charakteristische Werte von Massivholzplatten ist in Vorbereitung.

Panneaux à base de bois - Valeurs caractéristiques pour la conception structurelle - Partie 2: Contreplaqué

La présente Norme Européenne donne des informations sur les valeurs caractéristiques à utiliser dans la conception des structures incorporant des panneaux à base de bois. Les valeurs caractéristiques données sont telles que définies dans l'ENV 1995-1-1.
La présente norme contient les valeurs caractéristiques des propriétés mécaniques du contreplaqué répondant à l'EN 636 et aux exigences de l'EN 13986 pour les panneaux travaillant en flexion.
Des recommandations sur la manière d'obtenir les valeurs caractéristiques en traction et en compression du contreplaqué soit par essai soit par calcul sont fournies. Des valeurs sécuritaires relatives au cisaillement sont également incluses.
Des valeurs caractéristiques pour l'OSB, les panneaux de particules et les panneaux de fibres sont données dans l'EN 12369-1. Une autre partie de norme concernant les valeurs caractéristiques des bois panneautés est en préparation.

Lesne plošče – Značilne vrednosti za dimenzioniranje konstrukcij – 2. del: Vezan les

General Information

• Status: Withdrawn
• Publication Date: 24-Feb-2004
• Withdrawal Date: 14-Jun-2011
• ICS: 79.060.10 - Plywood
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 2 - Plywood
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Jun-2011
• Completion Date: 15-Jun-2011
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 12369-2:2004 - Wood-based panels - Characteristic values for structural design - Part 2: Plywood

Relations

• Replaced By: EN 12369-2:2011 - Wood-based panels - Characteristic values for structural design - Part 2: Plywood
• Effective Date: 18-Jun-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OHVHolzwerkstoffe - Charakteristiche Werte für die Berechnung und Bemessung von Holzbauwerken - Teil 2: SperrholzPanneaux a base de bois - Valeurs caractéristiques pour la conception structurelle - Partie 2: ContreplaquéWood-based panels - Characteristic values for structural design - Part 2: Plywood79.060.10Vezan lesPlywoodICS:Ta slovenski standard je istoveten z:EN 12369-2:2004SIST EN 12369-2:2004en01-september-2004SIST EN 12369-2:2004SLOVENSKI
STANDARD



SIST EN 12369-2:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12369-2February 2004ICS 79.060.10English versionWood-based panels - Characteristic values for structural design- Part 2: PlywoodPanneaux à base de bois - Valeurs caractéristiques pour laconception structurelle - Partie 2: ContreplaquéHolzwerkstoffe - Charakteristiche Werte für die Berechnungun Bemessung von Holzbauwerken - Teil 2: SperrholzThis European Standard was approved by CEN on 2 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12369-2:2004 ESIST EN 12369-2:2004



EN 12369-2:2004 (E)2ContentsPageForeword.31Scope.42Normative references.43Terms and definitions and symbols.43.1Terms and definitions.43.2Symbols.64General.65Characteristic values for plywood.75.1Introduction.75.2EN 636: Plywood: Loadbearing panels for use in bending in all conditions.75.3Characteristic values for tension and compression.85.4Characteristic values for both panel and planar shear.8Annex A (informative)
Format for the presentation of characteristic values.10Bibliography.11SIST EN 12369-2:2004



EN 12369-2:2004 (E)3ForewordThis document (EN 12369-2:2004) has been prepared by Technical Committee CEN/TC 112 “Wood-basedpanels”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by August 2004, and conflicting national standards shall be withdrawn atthe latest by August 2004.This standard is intended to be used in conjunction with ENV 1995-1-1.NOTEprEN 1995-1-1 is in preparation.Annex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organiz
...