EN 15290:2011
(Main)Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
This European Standard specifies methods for the determination of major elements of solid biofuels respectively of their ashes, which are Al, Ca, Fe, Mg, P, K, Si, Na, Ti. The determination of other elements such as barium (Ba) and manganese (Mn) is also possible with the methods described in this European Standard.
The European Standard includes two parts: Part A describes the direct determination on the fuel, this method is also applicable for sulfur and minor elements, Part B gives a method of determination on a prepared 550 °C ash.
Feste Biobrennstoffe - Bestimmung von Hauptelementen - Al, Ca, Fe, Mg, P, K, Si, Na und Ti
Die Europäische Norm legt Verfahren zur Bestimmung von Hauptelementen fester Biobrennstoffe bzw. deren Aschen fest, das sind Al, Ca, Fe, Mg, P, K, Si, Na, Ti. Die Bestimmung anderer Elemente, wie z. B. von Barium (Ba) und Mangan (Mn), ist mit den in dieser Europäischen Norm beschriebenen Verfahren auch möglich. Diese Europäische Norm enthält zwei Teile: In Teil A ist die direkte Bestimmung am Brennstoff festgelegt, dieses Verfahren gilt auch für Schwefel und Spurenelemente, mit Teil B wird ein Verfahren zur Bestimmung an einer bei 550 °C hergestellten Asche zur Verfügung gestellt.
Biocombustibles solides - Dosage des éléments majeurs - Al, Ca, Fe, Mg, P, K, Si, Na et Ti
La présente Norme européenne spécifie des méthodes de dosage d’éléments majeurs des biocombustibles
solides ou de leurs cendres, à savoir Al, Ca, Fe, Mg, P, K, Si, Na, Ti. Le dosage d’autres éléments, tels que le
baryum (Ba) et le manganèse (Mn), est également possible avec les méthodes décrites dans la présente
Norme européenne.
La Norme européenne comprend deux parties : La Partie A décrit le dosage direct sur le combustible et
s’applique aussi aux éléments soufrés ainsi qu’aux éléments mineurs. La Partie B décrit une méthode de
dosage sur la cendre préparée à 550 °C.
Trdna biogoriva - Določevanje makro elementov - Al, Ca, Fe, Mg, P, K, Si, Na in Ti
Ta evropski standard določa metode za določevanje makroelementov iz pepela trdnih biogoriv v tem zaporedju, ki so Al, Ca, Fe, Mg, P, K, Si, Na, Ti. Določevanje drugih elementov, kot sta barij (Ba) in mangan (Mn), je prav tako mogoče z metodami, opisanimi v tem evropskem standardu. Ta evropski standard vsebuje dva dela: Del A opisuje neposredno določevanje goriva, pri čemer ta metoda prav tako velja za žveplo in manjše elemente, del B pa podaja metodo za določevanje pri pripravljenem pepelu pri temperaturi 550 °C.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Feste Biobrennstoffe - Bestimmung von Hauptelementen - Al, Ca, Fe, Mg, P, K, Si, Na und TiBiocombustibles solides - Dosage des éléments majeurs - Al, Ca, Fe, Mg, P, K, Si, Na et TiSolid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti75.160.10Trda gorivaSolid fuelsICS:Ta slovenski standard je istoveten z:EN 15290:2011SIST EN 15290:2011en,deSIST EN 15290:2011SLOVENSKI
STANDARDSIST-TS CEN/TS 15290:20061DGRPHãþD
SIST EN 15290:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15290
February 2011 ICS 75.160.10 Supersedes CEN/TS 15290:2006English Version
Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti
Biocombustibles solides - Dosage des éléments majeurs - Al, Ca, Fe, Mg, P, K, Si, Na et Ti
Feste Biobrennstoffe - Bestimmung von Hauptelementen - Al, Ca, Fe, Mg, P, K, Si, Na und Ti This European Standard was approved by CEN on 25 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15290:2011: ESIST EN 15290:2011
EN 15290:2011 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Symbols and abbreviations .64.1Symbols .64.2Abbreviations .65Principle .76Reagents .76.1General .76.2Water .76.3Nitric acid (HNO3) .76.4Hydrogen peroxide (H2O2) .76.5Hydrofluoric acid (HF) .76.6Boric acid (H3BO3).76.7Use of Certified Reference Materials (CRM or SRM) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.