EN ISO 8849:2003

Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003)

ISO 8849:2003 specifies requirements for electrically operated direct-current bilge pumps intended for use in removing bilge water from small craft with a hull length up to 24 m. It applies to electrically operated bilge pumps rated for less than 50 V direct current (d.c.). It does not cover pumps intended for damage control.

Kleine Wasserfahrzeuge - Elektrisch angetriebene Gleichstrom- Bilgepumpen (ISO 8849:2003)

Diese Norm legt Anforderungen an elektrisch betriebene Gleichstrom-Bilgepumpen fest, die dazu vorgesehen sind Bilgewasser aus kleinen Wasserfahrzeugen mit einer Rumpflänge bis 24 m zu entfernen. Sie gilt für elektrisch betriebene Bilgepumpen, die mit Gleichstrom von weniger als 50 V arbeiten.
Diese Norm gilt nicht für Pumpen, die zur Schadensbekämpfung vorgesehen sind.

Petits navires - Pompes de cale à moteur électrique en courant continu (ISO 8849:2003)

L'ISO 8849:2003 spécifie les exigences relatives aux pompes de cale à moteur électrique en courant continu, utilisées pour pomper l'eau du fond des cales des navires dont la longueur de coque n'excède pas 24 m. Elle est applicable aux pompes de cale à moteur électrique alimentées en courant continu d'une tension inférieure à 50 V. Elle ne traite pas des pompes destinées à contrôler l'eau provenant d'une avarie.

Mala plovila – Električne kalužne črpalke za enosmerno napetost (ISO 8849:2003)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2003
• Withdrawal Date: 25-Sep-2018
• ICS: 47.080 - Small craft
• Technical Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Drafting Committee: CEN/SS T01 - Shipbuilding and maritime structures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 26-Sep-2018
• Directive: 2003/44/EC - Approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Directive: 2013/53/EU - Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
• Directive: 94/25/EC - Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft
• Mandate: M/075 - Revised mandate to CEN for standardization in the field of recreational craft
• Ref Project: SIST EN ISO 8849:2004 - Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003)

Relations

• Replaces: EN 28849:1993 - Small craft - Electrically operated bilge-pumps (ISO 8849:1990)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 8849:2018 - Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003)
• Effective Date: 03-Oct-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8849:2004
01-september-2004
1DGRPHãþD
SIST EN 28849:2000
SIST EN 28849:2000/A1:2001
0DODSORYLOD±(OHNWULþQHNDOXåQHþUSDONH]DHQRVPHUQRQDSHWRVW,62
Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003)
Kleine Wasserfahrzeuge - Elektrisch angetriebene Gleichstrom- Bilgepumpen (ISO
8849:2003)
Petits navires - Pompes de cale a moteur électrique en courant continu (ISO 8849:2003)
Ta slovenski standard je istoveten z: EN ISO 8849:2003
ICS:
47.020.60 (OHNWULþQDRSUHPDODGLMLQ Electrical equipment of ships
NRQVWUXNFLMQDPRUMX and of marine structures
47.080 ýROQL Small craft
SIST EN ISO 8849:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8849:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 8849:2004
EUROPEAN STANDARD
EN ISO 8849
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2003
ICS 47.080 Supersedes EN 28849:1993
English version
Small craft - Electrically operated direct-current bilge-pumps
(ISO 8849:2003)
Petits navires - Pompes de cale à moteur électrique en Kleine Wasserfahrzeuge - Elektrisch angetriebene
courant continu (ISO 8849:2003) Gleichstrom- Bilgepumpen (ISO 8849:2003)
This European Standard was approved by CEN on 1 September 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8849:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8849:2004
EN ISO 8849:2003 (E)
CORRECTED  2003-12-03
Foreword
This document (EN ISO 8849:2003) has been prepared by Technical Committee ISO/TC 188
"Small craft", the secretariat of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2004, and conflicting national
standards shall be withdrawn at the latest by April 2004.
This document supersedes EN 28849:1993.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For relationship with EU Directive(s), see informative Annex ZB, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 8849:2003 has been approved by CEN as EN ISO 8849:2003 without any
modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 8849:2004
EN ISO 8849:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 8846 1990 Small craft - Electrical devices - Protectio
...