iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN ISO/TS 14827-4:2022

(Main)

Intelligent transport systems - Data interfaces between centres for transport information and control systems - Part 4: Data interfaces between centres for Intelligent transport systems (ITS) using XML (Profile B) (ISO/TS 14827-4:2022)

Intelligent transport systems - Data interfaces between centres for transport information and control systems - Part 4: Data interfaces between centres for Intelligent transport systems (ITS) using XML (Profile B) (ISO/TS 14827-4:2022)

This document, based on ISO/TS 19468, specifies a platform-specific method for implementing data exchange among centres based on simple object access protocol (SOAP), supporting the EN 16157 series (DATEX II) for Push/Pull data delivery and service request/feedback collaborative intelligent transport system (ITS) services.
This document defines the message rules and procedures for communication between transport information and control systems using XML (Profile B).
This document clarifies how to package end-application messages and relevant data.
The payload data definition used in specific end-applications and the exact structure of the content payload delivered in the messages are beyond the scope of this document.
Rules and procedures for exchanging data-packets in lower communication layers are also out of the scope of this document. These functionalities can be implemented using generic protocols defined in the industry standards. However, this document does define how to use these protocols.

Verkehrsinformations- und Steuersysteme - Datenschnittstellen zwischen Verkehrsleitstellen und Steuersystemen - Teil 4: Datenschnittstellen zwischen Leitstellen für intelligente Verkehrssysteme (ITS), die XML (Profil B) verwenden (ISO/TS 14827-4:2022)

Systèmes de transport intelligents - Interface de données entre centres pour les systèmes de commande et d'information des transports - Partie 4: Interfaces de données entre centres pour systèmes de transport intelligents (ITS) utilisant XML (Profil B) (ISO/TS 14827-4:2022)

Inteligentni transportni sistemi - Podatkovni vmesniki med centri za transportne informacije in nadzornimi sistemi - 4. del: Podatkovni vmesniki med centri za inteligentne transportne sisteme (ITS) z uporabo XML (profil B) (ISO/TS 14827-4:2022)

Namen tega dokumenta, ki temelji na metodologiji ISO/TS 19468 in od platforme neodvisnih modelih za izmenjavo podatkov med centri za nadzor prometa, prometno-informacijskimi centri in ponudniki storitev, je v celoti določiti platformno specifično metodo za izmenjavo podatkov med centri, ki temeljijo na protokolu SOAP, podpirajo DATEX II, in sicer za dostavo podatkov (potisna sporočila ali na zahtevo) ter za zahteve/povratne informacije sodelovalnih inteligentnih prometnih sistemov.

General Information

Status
Published
Publication Date
11-Oct-2022
ICS
03.220.01 - Transport in general
35.240.60 - IT applications in transport
Technical Committee
CEN/TC 278 - Road transport and traffic telematics
Drafting Committee
CEN/TC 278/WG 8 - Road traffic data (RTD)
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-Oct-2022
Due Date
11-Jun-2022
Completion Date
12-Oct-2022
Ref Project
SIST-TS CEN ISO/TS 14827-4:2023 - Intellligent transport systems - Data interfaces between centres for transport information and control systems - Part 4: Data interfaces between centres for intelligent transport systems (ITS) using XML (Profile B) (ISO/TS 14827-4:2022)

Buy Standard

TS CEN ISO/TS 14827-4:2023TS CEN ISO/TS 14827-4:2023
PreviousNext
Technical specification
TS CEN ISO/TS 14827-4:2023
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 14827-4:2023
01-januar-2023
Inteligentni transportni sistemi - Podatkovni vmesniki med centri za transportne
informacije in nadzornimi sistemi - 4. del: Podatkovni vmesniki med centri za
inteligentne transportne sisteme (ITS) z uporabo XML (profil B) (ISO/TS 14827-
4:2022)
Intellligent transport systems - Data interfaces between centres for transport information
and control systems - Part 4: Data interfaces between centres for intelligent transport
systems (ITS) using XML (Profile B) (ISO/TS 14827-4:2022)
Verkehrsinformations- und Steuersysteme - Datenschnittstellen zwischen
Verkehrsleitstellen und Steuersystemen - Teil 4: Datenschnittstellen zwischen Leitstellen
für intelligente Verkehrssysteme (ITS), die XML (Profil B) verwenden (ISO/TS 14827-
4:2022)
Systèmes de transport intelligents - Interface de données entre centres pour les
systèmes de commande et d'information des transports - Partie 4: Interfaces de données
entre centres pour systèmes de transport intelligents (ITS) utilisant XML (Profil B)
(ISO/TS 14827-4:2022)
Ta slovenski standard je istoveten z: CEN ISO/TS 14827-4:2022
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST-TS CEN ISO/TS 14827-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 14827-4:2023

---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 14827-4:2023


CEN ISO/TS 14827-4
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

October 2022
TECHNISCHE SPEZIFIKATION
ICS 03.220.01; 35.240.60
English Version

Intelligent transport systems - Data interfaces between
centres for transport information and control systems -
Part 4: Data interfaces between centres for Intelligent
transport systems (ITS) using XML (Profile B) (ISO/TS
14827-4:2022)
Systèmes de transport intelligents - Interface de Verkehrsinformations- und Steuersysteme -
données entre centres pour les systèmes de commande Datenschnittstellen zwischen Verkehrsleitstellen und
et d'information des transports - Partie 4: Interfaces de Steuersystemen - Teil 4: Datenschnittstellen zwischen
données entre centres pour systèmes de transport Leitstellen für intelligente Verkehrssysteme (ITS), die
intelligents (ITS) utilisant XML (Profil B) (ISO/TS XML (Profil B) verwenden (ISO/TS 14827-4:2022)
14827-4:2022)
This Technical Specification (CEN/TS) was approved by CEN on 29 August 2022 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 14827-4:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 14827-4:2023
CEN ISO/TS 14827-4:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 14827-4:2023
CEN ISO/TS 14827-4:2022 (E)
European foreword
This document (CEN ISO/TS 14827-4:2022) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ nati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 21177:2024(Main)
Intelligent transport systems - ITS station security services for secure session establishment and authentication between trusted devices (ISO 21177:2024)
oSIST prEN ISO 21177:2024

This document contains specifications for a set of ITS station security services required to ensure the authenticity of the source and integrity of information exchanged between trusted entities, i.e.:
—     between devices operated as bounded secured managed entities, i.e. "ITS Station Communication Units" (ITS-SCU) and "ITS station units" (ITS-SU) as specified in ISO 21217; and
—     between ITS-SUs (composed of one or several ITS-SCUs) and external trusted entities such as sensor and control networks.
These services include the authentication and secure session establishment which are required to exchange information in a trusted and secure manner.
These services are essential for many intelligent transport system (ITS) applications and services, including time-critical safety applications, automated driving, remote management of ITS stations (ISO 24102-2), and roadside/infrastructure-related services.

  • Draft
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 21184:2021(Main)
Cooperative intelligent transport systems (C-ITS) - Global transport data management (GTDM) framework (ISO/TS 21184:2021)
SIST-TS CEN ISO/TS 21184:2021

This document specifies a global transport data management (GTDM) framework composed of
—     global transport basic data model,
—     global transport access control data model,
—     global transport function monitor data model, and
—     sensor and control network data model
to support data exchange between applications.
This document defines standardized data classes in a Global Transport Data Format (GTDF), and the means to manage them.
Application and role-based access control to resources in GTDF are specified in accordance with IEEE 1609.2 certificates.
This document specifies GTDM as an ITS-S capability which is an optional feature (ITS-capabilities are specified in ISO 24102-6).
The GT access control (GTAC) data model specifies access permissions to data and function control by defining role-based mechanisms.
The GT function monitor (GTFM) data model specifies a configuration method to generate a flow logic for monitoring purposes, e.g. observing data parameters with respect of a defined limit.

  • Technical specification
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 21186-3:2021(Main)
Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards - Part 3: Security (ISO/TR 21186-3:2021)
SIST-TP CEN ISO/TR 21186-3:2021

This document provides guidelines on security applicable in Intelligent Transport Systems (ITS) related to communications and data access.
In particular, this document provides analyses and best practice content for secure ITS connectivity using ISO/TS 21177.
This document analyses and identifies issues related to application security, access control, device security and PKI for a secure ITS ecosystem.

  • Technical report
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 21186-2:2021(Main)
Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards - Part 2: Hybrid communications (ISO/TR 21186-2:2021)
SIST-TP CEN ISO/TR 21186-2:2021

This document serves as a guideline explaining the concept of hybrid communications and support functionalities for Cooperative ITS services deployed in conformance with the ITS station architecture and related Cooperative ITS standards.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24014-1:2021(Main)
Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2021)
SIST EN ISO 24014-1:2021

This document gives guidelines for the development of multi-operator/multi-service interoperable public surface (including subways) transport fare management systems (IFMSs) on a national and international level.
This document is applicable to bodies in public transport and related services which agree that their systems need to interoperate.
This document defines a conceptual framework which is independent of organizational and physical implementation. Any reference within this document to organizational or physical implementation is purely informative.
This document defines a reference functional architecture for IFMSs and establishes the requirements that are relevant for ensuring interoperability between several actors in the context of the use of electronic tickets.
The IFMS includes all the functions involved in the fare management process, such as:
—     management of media,
—     management of applications,
—     management of products,
—     security management, and
—     certification, registration, and identification.
This document defines the following main elements:
—     identification of the different sets of functions in relation to the overall IFMS and services and media from non-transport systems which interact with fare management systems;
—     a generic model of an IFMS describing the logical and functional architecture and the interfaces within the system, with other IFMSs and with services and media from non-transport systems;
—     use cases describing the interactions and data flows between the different sets of functions;
—     security requirements.
In its annexes, this document provides a framework for mobility platforms that integrate fare management and travel information for inter- and multimodal travel (see Annex A). It also elaborates on specific subjects covered in document and offers some national examples with regard to IFMS implementations (see Annex B, Annex C, Annex D and Annex E).
This document does not define:
—     the technical aspects of the interface between the medium and the medium access device;
—     the data exchanges between the medium and the medium access device;
NOTE     The data exchanges between the medium and the medium access device are proposed by other standardization committees.
—     the financial aspects of fare management systems (e.g. customer payments, method of payment, settlement, apportionment, reconciliation).

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 21186-1:2021(Main)
Cooperative intelligent transport systems (C-ITS) - Guidelines on the usage of standards - Part 1: Standardization landscape and releases (ISO/TR 21186-1:2021)
SIST-TP CEN ISO/TR 21186-1:2021

This document
—     describes standardization activities related to C-ITS on a global level by major standard development organizations (SDOs);
—     explains the various purposes of deliverables from SDOs and introduces a classification scheme of such documents;
—     describes methods on how C-ITS services are presented and performed;
—     identifies an approach for C-ITS releases and exemplifies this approach;
—     presents a list of standards (Bibliography) with special relevance for C-ITS.

  • Technical report
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 21176:2020(Main)
Cooperative intelligent transport systems (C-ITS) - Position, velocity and time functionality in the ITS station (ISO/TS 21176:2020)
SIST-TS CEN ISO/TS 21176:2020

This document specifies a generic position, velocity and time (PVT) service. It further specifies the PVT service within the ITS station (ITS-S) facilities layer (ISO 21217) and its interface to other functionalities in an ITS-S such as:
—     ITS-S application processes (ITS-S-APs), defined in ISO 21217;
—     the generic facilities service handler (FSH) functionality of the ITS station facilities layer, defined in ISO/TS 17429.
This document specifies:
—     a PVT service which, dependent on a specific implementation, uses a variety of positioning-related sources such as global navigation satellite systems (GNSSs, e.g. GALILEO, GLONASS and GPS), roadside infrastructure, cellular infrastructure, kinematic state sensors, vision sensors;
—     a PVT service which merges data from the above-mentioned positioning-related sources and provides the PVT output parameters (carrying the PVT information) including the associated quality (e.g. accuracy);
—     how the PVT service is integrated as an ITS-S capability of the ITS station facilities layer;
—     the interface function calls and responses (Service Access Point ? service primitives) between the PVT ITS-S capability and other functionalities of the ITS station architecture;
—     optionally, the PVT service as a capability of the ITS-S facilities layer; see ISO 24102-6;
—     an ASN.1 module C-itsPvt, providing ASN.1 type and value definitions (in Annex A);
—     an implementation conformance statement proforma (in Annex B), as a basis for assessment of conformity to this document.
NOTE    It is outside the scope of this document to define the associated conformance evaluation test procedures.

  • Technical specification
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22418:2020(Main)
Intelligent transport systems - Fast service announcement protocol (FSAP) for general purposes in ITS (ISO 22418:2020)
SIST EN ISO 22418:2020

This document specifies the fast service announcement protocol (FSAP) for general purposes in ITS. It references and supports all features of ISO/TS 16460, especially supporting the service response message (SRM) and related features in addition to the service announcement message (SAM), which enables only very basic features.
FSAP supports locally advertised ITS services uniquely identified by an ITS application identifier (ITS-AID).
This document specifies message formats and related basic protocol procedures by reference to ISO/TS 16460, and further related protocol requirements for operation of FSAP in the context of an ITS station specified in ISO 21217.
This document illustrates its relations to service announcement protocols specified by ETSI TC ITS and IEEE.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 21189:2019(Main)
Intelligent transport systems - Cooperative ITS - Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma for CEN ISO/TS 17426 (ISO/TS 21189:2019)
SIST-TS CEN ISO/TS 21189:2019

This document provides the Protocol Implementation Conformance Statement (PICS) pro forma for conformance test specification for the Contextual Speed Information Service as defined in ISO/TS 17426:2016 in accordance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17427-1:2018(Main)
Intelligent transport systems - Cooperative ITS - Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) (ISO 17427-1:2018)
SIST EN ISO 17427-1:2018

This document contains a detailed description of the (actor invariant) roles (3.22) and responsibilities (3.21) required to deploy and operate Cooperative-ITS (C-ITS) (3.8). The organization/organization of actors / roles described in this document are designed to be appropriate for any fully operational system that uses the C-ITS concepts and techniques in order to achieve its service provision. This document is presented in terms of an organizational or enterprise viewpoint (3.10) as defined in ISO/IEC 10746-1.
This document is for all types of road traffic of all classes, and for any other actors involved in the provision of applications and services which use C-ITS techniques to achieve service provision. The description of roles is technology agnostic and, in terms of C-ITS, agnostic in respect of communication modes and embraces vehicle-vehicle communications, vehicle-infrastructure communications and infrastructure-infrastructure communications.
This document provides a methodology for the identification of service specific roles and their corresponding responsibilities based on a process oriented approach. Additionally, the methodology is used to identify the roles and responsibilities for C-ITS in general. Both the methodology as well as the roles and responsibilities for C-ITS are deduced from ISO/IEC 10746-1, ISO/IEC 10746-2, ISO/IEC 10746-3, the reference model of Open Distributed Processing. Open Distributed Processing offers five viewpoints of which the enterprise viewpoint corresponds with the organizational architecture and its roles and responsibilities.
To limit the scope of the document to the core of C-ITS, the roles are separated into external and internal. Considered to be internal are all roles that are highly relevant for the purpose of achieving service provision by means of C-ITS. Considered to be external are all roles involved in C-ITS, but not set up only for the purpose of C-ITS.
This document provides a description of a high-level architectural viewpoint on C-ITS. It is designed to be used as a blueprint when implementing service provision systems that use C-ITS, and the corresponding organizational structures. The characteristics of C-ITS entail a huge number of data/ information exchanges. Therefore the implementation stringently respects privacy and data protection as it is defined in ISO/TR 12859 and in national laws and regulations (where instantiated). Privacy and data protection affects all roles defined in this document due to these characteristics and all actors occupying roles in C-ITS respects the corresponding standards and regulations.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day