EN 15322:2009

Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders

This document provides a framework for specifying cut-back and fluxed bituminous binders which are suitable for the use in the construction and maintenance of roads, airfields and other paved areas.
This document applies to un-modified and polymer modified bituminous cut-back and fluxed materials.

Bitumen und bitumenhaltige Bindemittel - Rahmenwerk für die Spezifizierung von verschnittenen und gefluxten bitumenhaltigen Bindemitteln

Dieses Dokument legt ein Rahmenwerk für die Spezifizierung von verschnittenen und gefluxten bitumenhaltigen
Bindemitteln fest, die für die Verwendung beim Bau und der Instandhaltung von Straßen, Flugplätzen
und sonstigen befestigten Flächen geeignet sind.
Dieses Dokument gilt für nicht-modifizierte und polymermodifizierte bitumenhaltige verschnittene oder gefluxte
Materialien.

Bitumes et liants bitumineux - Cadre de spécifications pour les liants bitumineux fluidifiés et fluxés

Le présent document prescrit un cadre de spécifications des liants bitumineux fluxés et fluidifiés utilisables pour la construction et l’entretien des chaussées routières, des pistes d’aéroports et des autres chaussées.
Ce document s’applique aux liants bitumineux fluidifiés ou fluxés non-modifiés et modifiés par des polymères.

Bitumen in bitumenska veziva - Okvir za specificiranje rezanih in fluksiranih bitumenskih veziv

General Information

• Status: Withdrawn
• Publication Date: 18-Aug-2009
• Withdrawal Date: 07-May-2013
• ICS: 75.140 - Waxes, bituminous materials and other petroleum products
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 336 - Bituminous binders
• Drafting Committee: CEN/TC 336/WG 2 - Emulsions and fluxed bitumens
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-May-2013
• Completion Date: 08-May-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 15322:2009 - Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders

Relations

• Replaced By: EN 15322:2013 - Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders
• Effective Date: 15-May-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Okvir za specificiranje rezanih in fluksiranih bitumenskih vezivBitumen und bitumenhaltige Bindemittel - Rahmenwerk für die Spezifizierung von verschnittenen und gefluxten bitumenhaltigen BindemittelnBitumes et liants bitumineux - Cadre de spécifications pour les liants bitumineux fluidifiés et fluxésBitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 15322:2009SIST EN 15322:2009en,fr,de01-november-2009SIST EN 15322:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15322August 2009ICS 75.140; 91.100.50 English VersionBitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous bindersBitumes et liants bitumineux - Cadre de spécifications pourles liants bitumineux fluidifiés et fluxésBitumen und bitumenhaltige Bindemittel - Rahmenwerk fürdie Spezifizierung von verschnittenen und gefluxtenbitumenhaltigen BindemittelnThis European Standard was approved by CEN on 17 July 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15322:2009: ESIST EN 15322:2009

Examples of abbreviation terms for cut-back bituminous binders and fluxed bituminous binders . 18Annex B (informative)
Examples of selected performance classes for cut-back and fluxed bituminous binders. 19Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Product Directive 89/106/EEC . 21 SIST EN 15322:2009

NOTE Industrial applications are not covered by mandate M/124. Bituminous binders Paving Grade Bitumens EN 12591 Oxidized Bitumens (industrial applications) EN 13304 Hard GradeindustrialBitumens (industrial applications)EN 13924 Hard paving Grade Bitumens PolymerModifiedBitumens EN 14023 EN 13305Cut-back &Fluxed Bitumens EN 15322 Cationic Bitumen EmulsionsEN 13808 SIST EN 15322:2009

Fv a Mineral oil fluxed bitumen or cut-back bitumen
Vegetable oil fluxed bitumen EN 12597 3
from Class 2
to Class 4
from Class 5
to Class 7 Viscosity class
prEN 12846-2 (Efflux time)
EN 13302 (Dynamic viscosity) 4 and 5 (if appropriate)
B
P Indication of the binder type Paving grade bitumen
Addition of polymer b
EN 12591
EN 14023 b 5 or 6
Setting ability of Fm types
from Class 2
to Class 6 % of total distillate
distilling at 225 °C EN 13358
Setting ability of Fv types
from Class 2
to Class 7 R&B softening point
on recovered binder EN 1427 prEN 13074-1:2008 (Subclause 7.3) a F has been used for both cut-back and fluxed bitumens to avoid confusion as C has been used already to designate cationic bitumen emulsions. b May be prepared using polymer modified bitumen (EN 14023) or by addition of polymer to the cut-back or fluxed bituminous material. The following abbreviation terms are used in the specification tables of this European standard (see Table 3, Table 4 and Table 5): NR for "No Requirement": this class has been included to accommodate countries where the characteristic, for a given intended use, is not subject to regulatory requirements, i.e. when there are no regulations for the property/characteristic in the territory of intended use. TBR for "To Be Reported": this class shall mean that the manufacturer is invited, but not required, to provide information, regarding performance characteristics, with the product. NOTE The reported values (TBR) are intended to be used for future development of specifications. DV for "Declared Value": this class shall mean that the manufacturer is required to provide a value or a range of values, or limiting value(s) as part of a regulatory declaration and subsequent regulatory marking. SIST EN 15322:2009
...