FprEN 16603-20
(Main)Space engineering - Electrical and electronic
Space engineering - Electrical and electronic
Scope remains unchanged.
This Standard establishes the basic rules and general principles applicable to the electrical, electronic, electromagnetic, microwave and engineering processes. It specifies the tasks of these engineering processes and the basic performance and design requirements in each discipline.
It defines the terminology for the activities within these areas.
It defines the specific requirements for electrical subsystems and payloads, deriving from the system engineering requirements laid out in EN 16603-10 (equivalent of ECSS-E-ST-10 "Space engineering - System engineering general requirements".)
Raumfahrttechnik - Elektrik und Elektronik
Ingénierie spatiale - Électrique et électronique
Vesoljska tehnika - Električna in elektronska
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 16603-20:2021
01-november-2021
Nadomešča:
SIST EN 16603-20:2020
Vesoljska tehnika - Električna in elektronska
Space engineering - Electrical and electronic
Raumfahrttechnik - Elektrik und Elektronik
Ingénierie spatiale - Électrique et électronique
Ta slovenski standard je istoveten z: prEN 16603-20
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
49.140 Vesoljski sistemi in operacije Space systems and
operations
oSIST prEN 16603-20:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16603-20:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16603-20:2021
EUROPEAN STANDARD
DRAFT
prEN 16603-20
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2021
ICS 49.140
Will supersede EN 16603-20:2020
English version
Space engineering - Electrical and electronic
Ingénierie spatiale - Électrique et électronique Raumfahrttechnik - Elektrik und Elektronik
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/CLC/JTC 5.
If this draft becomes a European Standard, CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
alteration.
This draft European Standard was established by CEN and CENELEC in three official versions (English, French, German). A
version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own
language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Recipients of this draft are invited to submit, with their comments, notification
of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2021 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. prEN 16603-20:2021 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16603-20:2021
prEN 16603-20:2021 (E)
Table of contents
European Foreword . 6
1 Scope . 7
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 9
3.1 Terms from other standards . 9
3.2 Terms specific to the present standard . 9
3.3 Abbreviated terms . 16
3.4 Nomenclature . 18
4 General requirements . 19
4.1 Interface requirements. 19
4.1.1 Overview . 19
4.1.2 Signals interfaces . 19
4.1.3 Commands . 19
4.1.4 Telemetry . 21
4.2 Design . 21
4.2.1 Failure containment and redundancy .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.