EN 438-1:2005
(Main)High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
This Part of EN 438 gives an overview of the standard, and provides guidance in the selection and application of test methods and specifications contained in Parts 2 to 7 of EN 438.
Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 1: Einleitung und allegemeine Informationen
Dieser Teil von prEN 438 gibt einen Überblick über die Norm und liefert eine Anleitung für die Auswahl und Anwendung der in den Teilen 2 bis 7 von prEN 438 enthaltenen Prüfverfahren und Spezifikationen.
Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 1 : Introduction et informations générales
La présente partie du prEN 438 donne une description générale de la norme, ainsi que des indications pour la sélection et l'application des méthodes d'essai et des spécifications contenues dans les parties 2 à 6 de l'EN 438.
Dekorativni visokotlačni laminati (HPL) - Plošče na osnovi duromernih smol - 1. del: Uvod in splošne informacije
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 1: Einleitung und allegemeine InformationenStratifiés décoratifs haute pression (HPL) - Plaques a base de résines thermodurcissables (communément appelées stratifiés) - Partie 1 : Introduction et informations généralesHigh-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information83.140.20Laminated sheetsICS:Ta slovenski standard je istoveten z:EN 438-1:2005SIST EN 438-1:2005en01-maj-2005SIST EN 438-1:2005SLOVENSKI
STANDARDSIST EN 438-2:1999SIST EN 438-1:20001DGRPHãþD
SIST EN 438-1:2005
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 438-1
January 2005 ICS 83.140.20 Supersedes EN 438-1:1991, EN 438-2:1991 English version
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
Stratifiés décoratifs haute pression (HPL) - Plaques à base de résines thermodurcissables (communément appelées stratifiés) - Partie 1 : Introduction et informations générales Dekorative Hochdruck-Schichtpressstoffplatten (HPL) - Platten auf Basis härtbarer Harze (Schichtpressstoffe) - Teil 1: Einleitung und allegemeine Informationen This European Standard was approved by CEN on 16 August 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 438-1:2005: ESIST EN 438-1:2005
EN 438-1:2005 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Term and definition.4 4 Guidance in the use of the standard.5 4.1 Description of parts.5 4.2 Applications.5 5 Product classification systems.5 Annex A (informative)
Addendum relating to hygienic, health and safety information for laminates intended for interior use.7
SIST EN 438-1:2005
EN 438-1:2005 (E) 3 Foreword This document (EN 438-1:2005) has been prepared by Technical Committee CEN /TC 249, "Plastics", the Secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. This document supersedes EN 438-1:1991 and EN 438-2:1991. This document consists of seven parts: Part 1: Introduction and general information Part 2: Determination of properties
Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates Part
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.