EN ISO 2401:2018
(Main)Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:2018)
Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:2018)
This document specifies methods for the determination of the efficiency, weld metal recovery and deposition coefficient of covered electrodes.
Schweißzusätze - Umhüllte Stabelelektroden - Bestimmung der Ausbringung, der Gesamtausbringung und des Abschmelzkoeffizienten (ISO 2401:2018)
Électrodes enrobées - Détermination de l'efficacité, du rendement du métal et du coefficient de dépôt (ISO 2401:2018)
Le présent document spécifie une méthode pour la détermination de l'efficacité, le rendement du métal et du coefficient de dépôt des électrodes enrobées.
Dodajni materiali za varjenje - Oplaščene elektrode - Ugotavljanje izkoristka, hitrosti odtaljevanja in talilne konstante (ISO 2401:2018)
V tem dokumentu so opredeljene metode za določanje izkoristka, hitrosti odtaljevanja in
talilne konstante oplaščenih elektrod.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 2401:2018
01-november-2018
1DGRPHãþD
SIST EN 22401:1998
'RGDMQLPDWHULDOL]DYDUMHQMH2SODãþHQHHOHNWURGH8JRWDYOMDQMHL]NRULVWND
KLWURVWLRGWDOMHYDQMDLQWDOLOQHNRQVWDQWH ,62
Welding consumables - Covered electrodes - Determination of the efficiency, metal
recovery and deposition coefficient (ISO 2401:2018)
Schweißzusätze - Umhüllte Stabelelektroden - Bestimmung der Ausbringung, der
Gesamtausbringung und des Abschmelzkoeffizienten (ISO 2401:2018)
Électrodes enrobées - Détermination de l'efficacité, du rendement du métal et du
coefficient de dépôt (ISO 2401:2018)
Ta slovenski standard je istoveten z: EN ISO 2401:2018
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST EN ISO 2401:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 2401:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 2401:2018
EN ISO 2401
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 25.160.20 Supersedes EN 22401:1994
English Version
Welding consumables - Covered electrodes -
Determination of the efficiency, metal recovery and
deposition coefficient (ISO 2401:2018)
Électrodes enrobées - Détermination de l'efficacité, du Schweißzusätze - Umhüllte Stabelelektroden -
rendement du métal et du coefficient de dépôt (ISO Bestimmung der Ausbringung, der Gesamtausbringung
2401:2018) und des Abschmelzkoeffizienten (ISO 2401:2018)
This European Standard was approved by CEN on 4 September 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2401:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 2401:2018
EN ISO 2401:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 2401:2018
EN ISO 2401:2018 (E)
European foreword
This document (EN ISO 2401:2018) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 22401:1994.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 2401:2018 has been approved by CEN as EN ISO 2401:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 2401:2018
--------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.