EN ISO 10528:1995

Textiles - Commercial laundering procedure for textile fabrics prior to flammability testing (ISO 10528:1995)

Specifies methods for assessing the possible effect of repeated commercial laundering on the flammability of textile fabrics. The effect of laundering is simulated using an automatic horizontal drum washing machine or small-scale laundry drum (wash wheel).

Textilien - Gewerbliche Waschverfahren für Textilien vor der Entflammbarkeitsprüfung (ISO 10528:1995)

Diese Internationale Norm legt Verfahren fest zur Bewertung der möglichen Auswirkung wiederholten gewerblichen Waschens auf die Entflammbarkeit textiler Flächengebilde verwendet werden. Der Effekt des Wäschewaschens wird unter Verwendung einer vollautomatischen horizontal umlaufenden Trommelwaschmaschine oder einer kleinen Wellenradmschine simuliert.

Textiles - Blanchissage commercial des étoffes textiles en vue des essais d'inflammabilité (ISO 10528:1995)

La présente Norme internationale prescrit des méthodes pour l'évaluation de l'effet possible du blanchissage commercial répété sur l'inflammabilité des étoffes textiles. L'effet du blanchissage est simulé en utilisant une machine à laver automatique à tambour horizontal ou une petite laveuse à tambour.

Tekstilije - Poklicno pranje tekstilij pred preskušanjem gorljivosti (ISO 10528:1995)

General Information

• Status: Published
• Publication Date: 31-May-1995
• ICS: 59.080.30 - Textile fabrics
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248/SC 3 - Chemical properties
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 02-Jul-2010
• Completion Date: 02-Jul-2010
• Ref Project: SIST EN ISO 10528:1999 - Textiles - Commercial laundering procedure for textile fabrics prior to flammability testing (ISO 10528:1995)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tekstilije - Poklicno pranje tekstilij pred preskušanjem gorljivosti (ISO 10528:1995)Textilien - Gewerbliche Waschverfahren für Textilien vor der Entflammbarkeitsprüfung (ISO 10528:1995)Textiles - Blanchissage commercial des étoffes textiles en vue des essais d'inflammabilité (ISO 10528:1995)Textiles - Commercial laundering procedure for textile fabrics prior to flammability testing (ISO 10528:1995)59.080.30TkanineTextile fabrics13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:Ta slovenski standard je istoveten z:EN ISO 10528:1995SIST EN ISO 10528:1999en01-marec-1999SIST EN ISO 10528:1999SLOVENSKI
STANDARD



SIST EN ISO 10528:1999



SIST EN ISO 10528:1999



SIST EN ISO 10528:1999



SIST EN ISO 10528:1999



SIST EN ISO 10528:1999



INTERNATIONAL STANDARD ISO 10528 First edition 1995-06-01 Textiles - Commercial laundering procedure for textile fabrics Prior to flammability testing Textiles - Blanchissage commercial des Stoffes textiles en vue des essais d ‘inflammabik6 Reference number ISO 10528: 1995(E) SIST EN ISO 10528:1999



ISO 10528:1995(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 10528 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing, finishing and water t-esis tance tes ts. Annex A of this International Standard is for information only. 0 ISO 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-l 211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 10528:1999



0 ISO ISO 10528:1995(E) The methods specified in this International Standard simulate the effect of commercial laundry procedures using soft water. The washing ma- chines specified are all horizontal rotating drum types with reversing action which are already in laboratory use but which differ considerably in tage volume, frequency of rotation and the methods of controlling liquor level and temperature. Alternative procedures for assessing the effect of domestic washing using hard water on the flammability of textile fabrics are given in ISO 12 138:-, Textiles - Domestic laundering procedure for textile fabrics Prior to flammability testing (to be published). The methods specify the use of liquor/load ratios of 5:l for washing and 9:l for rinsing, which are at the low end of the ranges used in normal laundry practice. For practical reasons they are determined with no fabric present. Extra water is added during the washing procedure but the amounts will vary according to the type of machine used and cannot be controlled. The specified wash temperature of (75 + 3) “C has been shown to be adequate to ensure sterilization of hospital items, while the use of higher temperatures does not produce any significant improvement in the cleansing effect. Some items may not be suitable for washing at this temperature, because of shrinkage or other factors, and an alternative procedure with a wash temperature of (40 + 3) “C is provided for such - fabrics. Different washing machines vary in their mechanical action and in the time taken to heat to the washing temperature. lt is also difficult to control the water inlet temperature. A total period of 30 min agitation during heating and washing is specified for the Standard wash. This is longer than would be used in practice but it helps to eliminate the uncontrollable variations between different types of installation and ensures that the test is more severe than actual use. In Order to eliminate variations in the period taken to heat to temperature, agitation is not started until a temperature of (40 & 3) “C is reached. This allows the water input temperature to vary without affecting the period of agitation. In interlaboratory trials carried out by ISO/TC 38/SC
...