Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:2022)

This document specifies requirements for the transmittance properties of uncut and unmounted finished spectacle lenses, including attenuation of solar radiation.
This document is not applicable to
—    spectacle lenses having specific transmittance or absorption characteristics prescribed for medical reasons,
—    products to which specific personal protective equipment transmittance standards apply, and
—    products intended for direct observation of the sun, such as for solar-eclipse viewing.
NOTE 1    By reference to ISO 21987 and ISO 14889, this document also applies to lenses mounted in spectacles.
NOTE 2    Optical and geometric requirements are given for uncut finished spectacle lenses in ISO 8980‑1 and ISO 8980‑2, and for mounted lenses, in ISO 21987.

Augenoptik - Rohkantige fertige Brillengläser - Teil 3: Transmissionsanforderungen und Prüfverfahren (ISO 8980-3:2022)

Dieses Dokument legt die Anforderungen für die Transmissionseigenschaften rohkantiger und nicht montierter fertiger Brillengläser fest, einschließlich solcher Gläser, die die Sonnenstrahlung dämpfen.
Dieses Dokument ist nicht anzuwenden für:
—   Brillengläser mit bestimmten Transmissionseigenschaften oder Absorptionseigenschaften, die aus medizinischen Gründen verordnet werden,
—   Produkte, für die besondere Normen hinsichtlich der Transmissionseigenschaften für persönliche Schutzausrüstungen gelten, und
—   Produkte zur direkten Beobachtung der Sonne, wie beispielsweise bei einer Sonnenfinsternis.
ANMERKUNG 1   Durch Verweisung auf ISO 21987 und ISO 14889 gilt dieses Dokument auch für in Brillenfassungen montierte Brillengläser.
ANMERKUNG 2   Optische und geometrische Anforderungen an rohkantige fertige Brillengläser sind in ISO 8980 1 und ISO 8980 2 angegeben; für fertig montierte Brillengläser sind sie in ISO 21987 angegeben.

Optique ophtalmique - Verres de lunettes finis non détourés - Partie 3: Spécifications relatives au facteur de transmission et méthodes d'essai (ISO 8980-3:2022)

Le présent document spécifie les exigences relatives aux propriétés de transmission des verres de lunettes finis non détourés et non montés, ainsi qu’à l’atténuation du rayonnement solaire.
Le présent document ne s’applique pas:
—    aux verres de lunettes présentant des caractéristiques de transmission ou d’absorption spécifiques ayant fait l’objet d’une spécification pour raisons médicales;
—    aux produits auxquels s’appliquent des normes particulières relatives au facteur de transmission des équipements de protection individuelle; et
—    aux produits destinés à l’observation directe du soleil, par exemple pour observer une éclipse solaire.
NOTE 1        Par référence avec l’ISO 21987 et l’ISO 14889, le présent document s’applique aussi aux verres montés sur les lunettes.
NOTE 2        Les exigences optiques et géométriques sont fournies dans l’ISO 8980‑1 et l’ISO 8980‑2 pour les verres de lunettes finis non détourés et dans l’ISO 21987 pour les verres montés.

Očesna optika - Nebrušena zglajena stekla očal - 3. del: Specifikacije za prepustnost in preskusne metode (ISO 8980-3:2022)

Ta dokument določa zahteve za lastnosti prepustnosti nebrušenih in nenameščenih zglajenih stekel očal, vključno z s stekli, ki zmanjšujejo sončno sevanje. Ta dokument se ne uporablja za: – stekla očal s posebnimi lastnostmi prepustnosti ali apsorpcije, ki so predpisana iz zdravstvenih razlogov; – izdelke, za katere veljajo posebni standardi glede prepustnosti osebne zaščitne opreme, in – izdelke, namenjene neposrednemu opazovanju sonca, na primer opazovanju sončnega mrka. OPOMBA 1: Ob sklicevanju na standarda ISO 21987 in ISO 14889 se ta dokument uporablja tudi za stekla, nameščena v očala. OPOMBA 2: Optične in geometrijske zahteve so podane za nebrušena zglajena stekla očal iz standardov ISO 8980-1 in ISO 8980-2, ter za vgrajena stekla iz standarda ISO 21987.

General Information

Status
Published
Publication Date
05-Jul-2022
Withdrawal Date
30-Jan-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Jul-2022
Completion Date
06-Jul-2022

Relations

Buy Standard

Standard
EN ISO 8980-3:2022
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 8980-3:2021
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8980-3:2022
01-september-2022
Nadomešča:
SIST EN ISO 8980-3:2014
Očesna optika - Nebrušena zglajena stekla očal - 3. del: Specifikacije za
prepustnost in preskusne metode (ISO 8980-3:2022)
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance
specifications and test methods (ISO 8980-3:2022)
Augenoptik - Rohkantige fertige Brillengläser - Teil 3: Transmissionsanforderungen und
Prüfverfahren (ISO 8980-3:2022)
Optique ophtalmique - Verres de lunettes finis non détourés - Partie 3: Spécifications
relatives au facteur de transmission et méthodes d'essai (ISO 8980-3:2022)
Ta slovenski standard je istoveten z: EN ISO 8980-3:2022
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
SIST EN ISO 8980-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 8980-3:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 8980-3:2022


EN ISO 8980-3
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2022
EUROPÄISCHE NORM
ICS 11.040.70 Supersedes EN ISO 8980-3:2013
English Version

Ophthalmic optics - Uncut finished spectacle lenses - Part
3: Transmittance specifications and test methods (ISO
8980-3:2022)
Optique ophtalmique - Verres de lunettes finis non Augenoptik - Rohkantige fertige Brillengläser - Teil 3:
détourés - Partie 3: Spécifications relatives au facteur Transmissionsanforderungen und Prüfverfahren (ISO
de transmission et méthodes d'essai (ISO 8980- 8980-3:2022)
3:2022)
This European Standard was approved by CEN on 1 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8980-3:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 8980-3:2022
EN ISO 8980-3:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 8980-3:2022
EN ISO 8980-3:2022 (E)
European foreword
This document (EN ISO 8980-3:2022) has been prepared by Technical Committee ISO/TC 172 "Optics
and photonics" in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8980-3:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8980
...

SLOVENSKI STANDARD
oSIST prEN ISO 8980-3:2021
01-april-2021
Očesna optika - Nebrušena zglajena stekla očal - 3. del: Specifikacije za
prepustnost in preskusne metode (ISO/DIS 8980-3:2021)
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance
specifications and test methods (ISO/DIS 8980-3:2021)
Augenoptik - Rohkantige fertige Brillengläser - Teil 3: Transmissionsanforderungen und
Prüfverfahren (ISO/DIS 8980-3:2021)
Optique ophtalmique - Verres de lunettes finis non détourés - Partie 3: Spécifications
relatives au facteur de transmission et méthodes d'essai (ISO/DIS 8980-3:2021)
Ta slovenski standard je istoveten z: prEN ISO 8980-3
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
oSIST prEN ISO 8980-3:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 8980-3:2021

---------------------- Page: 2 ----------------------
oSIST prEN ISO 8980-3:2021
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8980-3
ISO/TC 172/SC 7 Secretariat: DIN
Voting begins on: Voting terminates on:
2021-02-23 2021-05-18
Ophthalmic optics — Uncut finished spectacle lenses —
Part 3:
Transmittance specifications and test methods
Optique ophtalmique — Verres de lunettes finis non détourés —
Partie 3: Spécifications relatives au facteur de transmission et méthodes d'essai
ICS: 11.040.70
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8980-3:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2021

---------------------- Page: 3 ----------------------
oSIST prEN ISO 8980-3:2021
ISO/DIS 8980-3:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 8980-3:2021
ISO/DIS 8980-3:2021(E)

Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols . 2
5 Classification . 2
6 Requirements . 2
6.1 General . 2
6.2 General transmittance requ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.