EN 12643:1997+A1:2008

Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)

This European Standard specifies steering system tests and performance criteria for evaluating the steering capability of rubber-tyred self-propelled earth-moving machines having a machine speed, determined in accordance with ISO 6014:1986, greater than 20 km/h.
It applies to tractors, loaders, backhoe loaders, excavators, dumpers, tractor-scrapers and graders equipped with either manual (unassisted) steering, power-assisted steering of fully powered steering as defined in
ISO 6165:1997.
This European Standard excludes rollers, compactors and pipelayers.

Erdbaumaschinen - Radfahrzeuge - Lenkvermögen (ISO 5010:1992 modifiziert)

Diese Europäische Norm legt Anforderungen und Prüfungen für Lenkanlagen zur Beurteilung des Lenk-vermögens von gummibereiften, selbst fahrende Erdbaumaschinen, die für Fahrgeschwindigkeiten, ermittelt nach ISO 6014:1986, über 20 km/h ausgelegt sind, fest.
Sie gilt für Schlepper, Lader, Baggerlader, Bagger, Muldenfahrzeuge, Scraper und Grader, wie in ISO 6165:1997 definiert, die entweder mit Muskelkraftlenkung (ohne Fremdhilfe), Hilfskraftlenkung oder Fremdkraftlenkung ausgerüstet sind.
Diese Europäische Norm schließt Walzen, Bodenverdichter und Rohrleger aus.

Engins de terrassement - Engins équipés de pneumatiques - Systèmes de direction (ISO 5010:1992 modifié)

La présente norme européenne prescrit les essais et les critères de performance pour l’évaluation de la capacité du
système de direction des engins de terrassement automoteurs équipés de pneumatiques, dont la vitesse au sol,
déterminée conformément à l'ISO 6014:1986, est supérieure à 20 km/h.
Elle est applicable aux tracteurs, chargeuses, chargeuses-pelleteuses, pelles, tombereaux, décapeuses
automotrices et niveleuses, tels que définis dans l'ISO 6165:1997, équipés de systèmes de direction manuelle,
assistée, ou à servodirection.
La présente norme européenne exclut les rouleaux, les compacteurs et les tracteurs poseurs de canalisations.

Stroji za zemeljska dela - Stroji s pnevmatikami - Zahteve za krmiljenje (ISO 5010:1992, spremenjen)

General Information

• Status: Withdrawn
• Publication Date: 09-Sep-2008
• Withdrawal Date: 18-Feb-2014
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 1 - Earth-moving machinery - Safety
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Feb-2014
• Completion Date: 19-Feb-2014
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 12643:2000+A1:2008 - Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)

Relations

• Merged From: EN 12643:1997 - Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)
• Effective Date: 18-Jan-2023
• Replaced By: EN 12643:2014 - Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)
• Effective Date: 26-Feb-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji za zemeljska dela - Stroji s pnevmatikami - Zahteve za krmiljenje (ISO 5010:1992, spremenjen)Erdbaumaschinen - Radfahrzeuge - Lenkvermögen (ISO 5010:1992 modifiziert)Engins de terrassement - Engins équipés de pneumatiques - Systèmes de direction (ISO 5010:1992 modifié)Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)53.100Stroji za zemeljska delaEarth-moving machineryICS:Ta slovenski standard je istoveten z:EN 12643:1997+A1:2008SIST EN 12643:2000+A1:2008en01-november-2008SIST EN 12643:2000+A1:2008SLOVENSKI
STANDARD



SIST EN 12643:2000+A1:2008



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12643:1997+A1
September 2008 ICS 53.100 Supersedes EN 12643:1997English Version
Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)
Engins de terrassement - Engins équipés de pneumatiques - Systèmes de direction (ISO 5010:1992 modifié)
Erdbaumaschinen - Radfahrzeuge - Lenkvermögen (ISO 5010:1992 modifiziert) This European Standard was approved by CEN on 21 April 1997 and includes Amendment 1 approved by CEN on 30 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12643:1997+A1:2008: ESIST EN 12643:2000+A1:2008



EN 12643:1997+A1:2008 (E) 2 Foreword This document (EN 12643:1997+A1:2008) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-07-30. This document supersedes EN 12643:1997. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". This European Standard has been prepared on the basis of ISO 5010:1992 elaborated by ISO/TC 127 "Earth-moving machinery" and contains additionally an alternative test procedure. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." Endorsement notice: The text of the International Standard ISO 5010:1992 was approved by CEN as a European Standard with agreed common modifications as given below:  Normative references are dated  Clause "Alternative steering tests" and figure 3 have been added. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 12643:2000+A1:2008



EN 12643:1997+A1:2008 (E) 3 1 Scope This European Standard specifies steering system tests and performance criteria for evaluating the steering capability of rubber-tyred self-propelled earth-moving machines having a machine speed, determined in accordance with ISO 6014:1986, greater than 20 km/h. It applies to tractors, loaders, backhoe loaders, excavators, dumpers, tractor-scrapers and graders equipped with either manual (unassisted) steering, power-assisted steering of fully powered steering as defined
...