Earth-moving machinery - Safety - Part 7: Requirements for scrapers

This document, together with EN 474 1:2022, deals with all significant hazards, hazardous situations and events relevant to scrapers as defined in 3.1, except towed scrapers, when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A), associated with the whole life time of the machine as described in EN ISO 12100:2010, 5.4.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Transmission of power between self-propelled machinery (or tractor) and recipient machinery;
—   Laser;
—   Lightning.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for scrapers.
This document is not applicable to scrapers which are manufactured before the date of publication of this document by CEN.

Erdbaumaschinen - Sicherheit - Teil 7: Anforderungen an Scraper

Dieses Dokument behandelt zusammen mit EN 474 1:2022 alle signifikanten Gefährdungen, Gefährdungssituationen und ‑ereignisse von Scrapern, wie sie in 3.1 definiert sind, mit Ausnahme von gezogenen Scrapern, wenn diese Maschinen bestimmungsgemäß verwendet werden sowie unter den vernünftigerweise vom Hersteller vorhersehbaren Fehlanwendungen (siehe Anhang A) für die gesamte Lebensdauer der Maschine wie in EN ISO 12100:2010, 5.4, beschrieben betrieben werden.
Dieses Dokument enthält keine Leistungsanforderungen an Sicherheitsfunktionen von Steuerungssystemen.
Die folgenden signifikanten und relevanten Gefährdungen werden in diesem Dokument nicht behandelt:
—   Kraftübertragung zwischen einer selbstfahrenden Maschine (oder einer Zugmaschine) und einer angetriebenen Maschine;
—   Laserstrahlung;
—   Blitzschlag.
Die Anforderungen dieses Dokuments gelten ergänzend zu den allgemeinen Anforderungen in EN 474 1:2022. Dieses Dokument wiederholt nicht die Anforderungen aus EN 474 1:2022, sondern ergänzt oder ändert diese für den Einsatz von Scrapern.
Dieses Dokument ist nicht anwendbar für Scraper, die vor der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden.

Engins de terrassement - Sécurité - Partie 7 : Prescriptions applicables aux décapeuses

Le présent document, avec l’EN 474-1:2022, traite de tous les phénomènes, situations et événements dangereux significatifs relatifs aux décapeuses, telles que définies en 3.1, à l’exception des décapeuses tractées, lorsqu'elles sont utilisées normalement et dans les conditions prévues, mais en tenant également compte des mauvais usages raisonnablement prévisibles (voir Annexe A), associés à toute la durée de vie de l'engin, tel que décrit dans l'EN ISO 12100:2010, 5.4.
Le présent document ne spécifie aucune prescription de performance relative aux fonctions de sécurité du (des) système(s) de commande.
Les phénomènes dangereux significatifs et pertinents suivants ne sont pas couverts par le présent document :
—   transmission de puissance entre la machine automotrice (ou le tracteur) et la machine réceptrice ;
—   laser ;
—   foudre.
Les prescriptions figurant dans le présent document viennent en complément des prescriptions communes présentées dans l’EN 474-1:2022. Le présent document ne répète pas les prescriptions de l’EN 474-1:2022 mais complète ou modifie les prescriptions pour les décapeuses.
Le présent document n'est pas applicable aux décapeuses fabriquées avant la date de publication du présent document par le CEN.

Stroji za zemeljska dela - Varnost - 7. del: Zahteve za grabilnike (skreperje)

Ta del standarda EN 474 obravnava vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi z grabilniki (skreperji) s kolesi in gosenicami (razen vlečenih grabilnikov (skreperjev)) iz standarda EN ISO 6165:2012, kadar se uporabljajo v skladu s predvidenim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec (glej točko 4).
Zahteve iz tega dela dopolnjujejo splošne zahteve iz standarda
prEN 474-1:2017.
Ta del ne navaja ponovno zahtev iz standarda prEN 474-1:2017, temveč dodaja ali nadomešča zahteve za uporabo grabilnikov (skreperjev).
Ta del določa ustrezne tehnične ukrepe za odpravo ali zmanjšanje večjih tveganj, nevarnih situacij in nevarnih dogodkov med usposabljanjem za zagon, obratovanjem in vzdrževanjem grabilnikov (skreperjev).
Ta evropski standard se ne uporablja za grabilnike (skreperje), izdelane pred datumom izdaje tega evropskega standarda s strani Evropskega odbora za standardizacijo (CEN). Prekucniki, upravljani s tal, ne spadajo na področje uporabe tega evropskega standarda.
Ta evropski standard se ne uporablja za prekucnike, izdelane pred datumom izdaje tega evropskega standarda s strani Evropskega odbora za standardizacijo (CEN).

General Information

Status
Published
Publication Date
29-Mar-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Mar-2022
Due Date
25-May-2019
Completion Date
30-Mar-2022

Relations

Buy Standard

Standard
EN 474-7:2022
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 474-7:2017
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 474-7:2022
01-maj-2022
Nadomešča:
SIST EN 474-7:2007+A1:2009
Stroji za zemeljska dela - Varnost - 7. del: Zahteve za grabilnike (skreperje)
Earth-moving machinery - Safety - Part 7: Requirements for scrapers
Erdbaumaschinen - Sicherheit - Teil 7: Anforderungen für Scraper
Engins de terrassement - Sécurité - Partie 7 : Prescriptions applicables aux décapeuses
Ta slovenski standard je istoveten z: EN 474-7:2022
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN 474-7:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 474-7:2022

---------------------- Page: 2 ----------------------
SIST EN 474-7:2022


EN 474-7
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2022
EUROPÄISCHE NORM
ICS 53.100 Supersedes EN 474-7:2006+A1:2009
English Version

Earth-moving machinery - Safety - Part 7: Requirements
for scrapers
Engins de terrassement - Sécurité - Partie 7 : Erdbaumaschinen - Sicherheit - Teil 7: Anforderungen
Prescriptions applicables aux décapeuses für Scraper
This European Standard was approved by CEN on 14 February 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 474-7:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 474-7:2022
EN 474-7:2022 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Safety requirements and/or protective/risk reduction measures . 7
4.1 General . 7
4.2 Operator’s seat . 7
4.3 Operator’s Controls and Indicators . 7
4.4 Protective measures and devices . 8
4.5 Recovery, towing away for recovery purposes (TARP), tying-down, lifting and
transporting . 8
5 Verification of the safety requirements and/or protective/risk reduction measures . 8
6 Information for use . 9
6.1 General .
...

SLOVENSKI STANDARD
oSIST prEN 474-7:2017
01-junij-2017
Stroji za zemeljska dela - Varnost - 7. del: Zahteve za grabilnike (skreperje)
Earth-moving machinery - Safety - Part 7: Requirements for scrapers
Engins de terrassement - Sécurité - Partie 7 : Prescriptions applicables aux décapeuses
Ta slovenski standard je istoveten z: prEN 474-7
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
oSIST prEN 474-7:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 474-7:2017

---------------------- Page: 2 ----------------------
oSIST prEN 474-7:2017


DRAFT
EUROPEAN STANDARD
prEN 474-7
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2017
ICS 53.100 Will supersede EN 474-7:2006+A1:2009
English Version

Earth-moving machinery - Safety - Part 7: Requirements
for scrapers
Engins de terrassement - Sécurité - Partie 7 :
Prescriptions applicables aux décapeuses
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 151.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 474-7:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 474-7:2017
prEN 474-7:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 List of additional significant hazards . 5
5 Safety requirements and/or measures . 5
5.1 General . 5
5.2 Operator’s seat . 5
5.3 Retarder. 6
5.4 Articulated frame lock . 6
5.5 Towing device . 6
5.6 Noise .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.