EN ISO 10211:2007
(Main)Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007)
Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007)
ISO 10211:2007 sets out the specifications for a three-dimensional and a two-dimensional geometrical model of a thermal bridge for the numerical calculation of:
heat flows, in order to assess the overall heat loss from a building or part of it;
minimum surface temperatures, in order to assess the risk of surface condensation.
These specifications include the geometrical boundaries and subdivisions of the model, the thermal boundary conditions, and the thermal values and relationships to be used.
ISO 10211:2007 is based upon the following assumptions:
all physical properties are independent of temperature;
there are no heat sources within the building element.
ISO 10211:2007 can also be used for the derivation of linear and point thermal transmittances and of surface temperature factors.
Wärmebrücken im Hochbau - Wärmeströme und Oberflächentemperaturen - Detaillierte Berechnungen (ISO 10211:2007)
Diese Internationale Norm legt die Spezifikationen für geometrische dreidimensionale und zweidimensionale Modelle von Wärmebrücken fest zur numerischen Berechnung:
von Wärmeströmen zur Abschätzung der Gesamtwärmeverluste eines Gebäudes oder Gebäudeteils;
der niedrigsten Oberflächentemperaturen zur Abschätzung des Risikos einer Tauwasserbildung.
Diese Spezifikationen enthalten die geometrischen Grenzen, die Unterteilungen des Modells, die wärme¬technischen Grenzen und die zu verwendenden wärmetechnischen Kennwerte und Beziehungen.
Diese Internationale Norm beruht auf folgenden Annahmen:
alle physikalischen Eigenschaften sind temperaturunabhängig;
keine Wärmequellen im Bauteil.
Diese Internationale Norm kann auch für die Ermittlung von längenbezogenen und punktbezogenen Wärme¬durchgangskoeffizienten und Oberflächentemperaturkennzahlen angewendet werden.
Ponts thermiques dans les bâtiments - Flux thermiques et températures superficielles - Calculs détaillés (ISO 10211:2007)
L'ISO 10211:2007 établit les spécifications sur les modèles géométriques tridimensionnels et bidimensionnels d'un pont thermique, pour le calcul numérique des flux thermiques, afin d'évaluer la déperdition thermique globale d'un bâtiment ou d'une partie de bâtiment, et des températures superficielles minimales, afin d'évaluer le risque de condensation superficielle.
Ces spécifications incluent les limites du modèle géométrique et ses subdivisions, les conditions aux limites et les valeurs thermiques qui lui sont liées à utiliser.
L'ISO 10211:2007 est basée sur les suppositions suivantes: toutes les propriétés physiques sont indépendantes de la température, et absence de source de chaleur à l'intérieur de l'élément de construction.
L'ISO 10211:2007 peut aussi être utilisée pour la détermination des coefficients linéiques ou ponctuels de transmission thermique, ainsi que pour les facteurs de température superficielle.
Toplotni mostovi v stavbah - Toplotni tokovi in površinske temperature - Podrobni izračuni (ISO 10211:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2008
1DGRPHãþD
SIST EN ISO 10211-1:1997
SIST EN ISO 10211-1:1997/AC:2002
SIST EN ISO 10211-2:2002
7RSORWQLPRVWRYLYVWDYEDK7RSORWQLWRNRYLLQSRYUãLQVNHWHPSHUDWXUH3RGUREQL
L]UDþXQL ,62
Thermal bridges in building construction - Heat flows and surface temperatures -
Detailed calculations (ISO 10211:2007)
Wärmebrücken im Hochbau - Wärmeströme und Oberflächentemperaturen - Detaillierte
Berechnungen (ISO 10211:2007)
Ponts thermiques dans les bâtiments - Flux thermiques et températures superficielles -
Calculs détaillés (ISO 10211:2007)
Ta slovenski standard je istoveten z: EN ISO 10211:2007
ICS:
91.120.10
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 10211
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2007
ICS 91.120.10 Supersedes EN ISO 10211-1:1995, EN ISO 10211-2:2001
English Version
Thermal bridges in building construction - Heat flows and
surface temperatures - Detailed calculations (ISO 10211:2007)
Ponts thermiques dans les bâtiments - Flux thermiques et Wärmebrücken im Hochbau - Wärmeströme und
températures superficielles - Calculs détaillés (ISO Oberflächentemperaturen - Detaillierte Berechnungen (ISO
10211:2007) 10211:2007)
This European Standard was approved by CEN on 7 December 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10211:2007: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Foreword
This document (EN ISO 10211:2007) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee CEN/TC 89
"Thermal performance of buildings and building components", the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at
the latest by June 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10211-1:1995, EN ISO 10211-2:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10211:2007 has been approved by CEN as a EN ISO 10211:2007 without any modification.
INTERNATIONAL ISO
STANDARD 10211
First edition
2007-12-15
Thermal bridges in building
construction — Heat flows and surface
temperatures — Detailed calculations
Ponts thermiques dans les bâtiments — Flux thermiques et
températures superficielles — Calculs détaillés
Reference number
ISO 10211:2007(E)
©
ISO 2007
ISO 10211:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 10211:2007(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope .1
2 Normative references .1
3 Terms, definitions, symbols, units and subscripts.2
3.1 Terms and definitions .2
3.2 Symbols and units.6
3.3 Subscripts .7
4 Principles.7
5 Modelling of the construction .7
5.1 Dimension systems .7
5.2 Rules for modelling .7
5.3 Conditions for simplifying the geometrical model.13
6 Input data.17
6.1 General.17
6.2 Thermal conductivities of materials .18
6.3 Surface resistances.18
6.4 Boundary temperatures .18
6.5 Thermal conductivity of quasi-homogeneous layers .18
6.6 Equivalent thermal conductivity of air cavities .18
6.7 Determining the temperature in an adjacent unheated room .19
7 Calculation method.19
7.1 Solution technique.19
7.2 Calculation rules.19
8 Determination of thermal coupling coefficients and heat flow rate from 3-D calculations .20
8.1 Two boundary temperatures, unpartitioned model.20
8.2 Two boundary temperatures, partitioned model.20
8.3 More than two boundary temperatures .21
9 Calculations using linear and point thermal transmittances from 3-D calculations .21
9.1 Calculation of thermal coupling coefficient.21
9.2 Calculation of linear and point thermal transmittances .22
10 Determination of thermal coupling coefficient, heat flow rate and linear thermal
transmittance from 2-D calculations.23
10.1 Two boundary temperatures .23
10.2 More than two boundary temperatures .23
10.3 Determination of the linear thermal transmittance .23
10.4 Determination of the linear thermal transmittance for wall/floor junctions.24
10.5 Determination of the external periodic heat transfer coefficient for ground floors .25
11 Determination of the temperature at the internal surface .26
11.1 Determination of the temperature at the internal surface from 3-D calculations .26
11.2 Determination of the temperature at the internal surface from 2-D calculations .27
12 Input and output data .28
12.1 Input data.28
12.2 Output data.28
Annex A (normative) Validation of calculation methods .30
ISO 10211:2007(E)
Annex B (informative) Examples of the determination of the linear and
point thermal transmittances. 37
Annex C (informative) Determination of values of thermal coupling coefficient and temperature
weighting factor for more than two boundary temperatures . 40
Bibliography . 45
iv © ISO 2007 – All rights reserved
ISO 10211:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10211 was pre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.