EN ISO 8529-3:2024

Neutron reference radiation fields - Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence (ISO 8529-3:2023, including corrected version 2023-09)

This document provides guidance for those who calibrate protection-level dosemeters and doserate meters for area and individual monitoring with reference neutron radiation fields. This includes the determination of the response as a function of neutron energy and angle of incidence. The operational quantities recommended in ICRU Report 51 are considered. In addition to the description of procedures, this document includes appropriate definitions and conversion coefficients and provides guidance on the statement of measurement uncertainties.

Neutronen-Referenzstrahlungsfelder - Teil 3: Kalibrierung von Orts- und Personendosimetern und Bestimmung ihres Ansprechvermögens als Funktion der Neutronenenergie und des Einfallswinkels (ISO 8529-3:2023, einschließlich der korrigierten Fassung von 2023-09)

Dieses Dokument enthält eine Anleitung für diejenigen, die Strahlenschutzdosimeter und Dosisleistungs-mess¬geräte für die Umgebungs- und Personenüberwachung mit Neutronen-Referenzstrahlungsfeldern kalibrieren. Dies schließt die Bestimmung des Ansprechvermögens als Funktion der Neutronenenergie und des Einfalls¬winkels ein. Die in ICRU Report 51 [2] empfohlenen operativen Größen werden berücksichtigt. Zusätzlich zur Beschreibung der Verfahren enthält dieses Dokument geeignete Festlegungen und Konversionskoeffizienten und eine Anleitung für die Angabe der Messunsicherheiten.

Champs de rayonnement neutronique de référence - Partie 3: Étalonnage des dosimètres de zone et individuels et détermination de leur réponse en fonction de l’énergie et de l’angle d’incidence des neutrons (ISO 8529-3:2023, y compris version corrigée 2023-09)

Referenčna polja nevtronskega sevanja - 3. del: Umerjanje površinskih in osebnih dozimetrov ter določanje njihovega odziva kot funkcije energije nevtronov in vpadnega kota (ISO 8529-3:2023, vključno s popravljeno različico 2023-09)

Ta dokument določa zahteve za določanje moči sistemov za električni pogon plovil, kadar so predloženi za dokumentiranje in preverjanje deklarirane (ocenjene) moči, ki jo izda proizvajalec.
Uporablja se za električne sisteme za pogon plovil za rekreacijo in drugih malih plovil z dolžino trupa do 24 m.

General Information

• Status: Published
• Publication Date: 16-Jul-2024
• ICS: 17.240 - Radiation measurements
• Technical Committee: CEN/TC 430 - Nuclear energy, nuclear technologies, and radiological protection
• Drafting Committee: CEN/TC 430 - Nuclear energy, nuclear technologies, and radiological protection
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 17-Jul-2024
• Due Date: 18-Apr-2026
• Completion Date: 17-Jul-2024
• Ref Project: SIST EN ISO 8529-3:2024 - Neutron reference radiation fields - Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence (ISO 8529-3:2023, including corrected version 2023-09)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Referenčna polja nevtronskega sevanja - 3. del: Umerjanje površinskih in osebnih
dozimetrov ter določanje njihovega odziva kot funkcije energije nevtronov in
vpadnega kota (ISO 8529-3:2023, vključno s popravljeno različico 2023-09)
Neutron reference radiation fields - Part 3: Calibration of area and personal dosemeters
and determination of their response as a function of neutron energy and angle of
incidence (ISO 8529-3:2023, including corrected version 2023-09)
Neutronen-Referenzstrahlungsfelder - Teil 3: Kalibrierung von Orts- und
Personendosimetern und Bestimmung ihres Ansprechvermögens als Funktion der
Neutronenenergie und des Einfallswinkels (ISO 8529-3:2023, einschließlich der
korrigierten Fassung von 2023-09)
Champs de rayonnement neutronique de référence - Partie 3: Étalonnage des
dosimètres de zone et individuels et détermination de leur réponse en fonction de
l’énergie et de l’angle d’incidence des neutrons (ISO 8529-3:2023, y compris version
corrigée 2023-09)
Ta slovenski standard je istoveten z: EN ISO 8529-3:2024
ICS:
17.240 Merjenje sevanja Radiation measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8529-3
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 17.240
English Version
Neutron reference radiation fields - Part 3: Calibration of
area and personal dosemeters and determination of their
response as a function of neutron energy and angle of
incidence (ISO 8529-3:2023, including corrected version
2023-09)
Champs de rayonnement neutronique de référence - Neutronen-Referenzstrahlungsfelder - Teil 3:
Partie 3: Étalonnage des dosimètres de zone et Kalibrierung von Orts- und Personendosimetern und
individuels et détermination de leur réponse en Bestimmung ihres Ansprechvermögens als Funktion
fonction de l'énergie et de l'angle d'incidence des der Neutronenenergie und des Einfallswinkels (ISO
neutrons (ISO 8529-3:2023, y compris version corrigée 8529-3:2023, einschließlich der korrigierten Fassung
2023-09) von 2023-09)
This European Standard was approved by CEN on 7 July 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8529-3:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 8529-3:2023, including corrected version 2023-09 has been prepared by Technical
Committee ISO/TC 85 “Nuclear energy, nuclear technologies, and radiological protection” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 8529-3:2024 by
Technical Committee CEN/TC 430 “Nuclear energy, nuclear technologies, and radiological protection”
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 8529-3:2023, including corrected version 2023-09 has been approved by CEN as
INTERNATIONAL ISO
STANDARD 8529-3
Second edition
2023-06
Corrected version
2023-09
Neutron reference radiation fields —
Part 3:
Calibration of area and personal
dosemeters and determination
of their response as a function of
neutron energy and angle of incidence
Champs de rayonnement neutronique de référence —
Partie 3: Étalonnage des dosimètres de zone et individuels et
détermination de leur réponse en fonction de l’énergie et de l’angle
d’incidence des neutrons
Reference number
ISO 8529-3:2023(E)
ISO 8529-3:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 8529-3:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Procedures applicable to area and personal dosemeters . 2
4.1 Neutron fields . 2
4.2 Conversion coefficients . 2
4.3 Determination of the response . 3
4.4 Calibration procedures . 3
5 Procedures for calibrating and determining the ambient dose equivalent response
of area dosemeters .4
5.1 Quantity to be measured and conversion coefficients . 4
5.2 Required response characteristics . 4
5.3 Dosemeter conditions . 4
5.4 Irradiation geometry . 4
5.5 Evaluation of measurement . 4
6 Procedures for calibrating and determining the personal dose equivalent response
of personal dosemeters . 5
6.1 Quantity to be measured and conversion coefficients . 5
6.2 Required response characteristics . 6
6.3 Calibration phantom . . 6
6.4 Dosemeter conditions . 6
6.5 Irradiation geometry . 6
6.6 Evaluation of measurement . 7
7 Uncertainty . 8
Annex A (informative) List of reference conditions and standard test conditions .9
Bibliography .10
iii
ISO 8529-3:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 85, Nuclear energy, nuclear technologies,
and radiological protection, Subcommittee SC 2, Radiation p
...