EN ISO 10423:2009
(Main)Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009)
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009)
ISO 10423:2009 specifies requirements and gives recommendations for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and christmas tree equipment for use in the petroleum and natural gas industries.
ISO 10423:2009 does not apply to field use, field testing or field repair of wellhead and christmas tree equipment.
ISO 10423:2009 is applicable to specific types of wellhead equipment, connectors and fittings; casing and tubing hangers; valves and chokes; loose connectors [flanged, threaded, other end connectors (OEC), and welded]; and other equipment, such as actuators, clamp hubs, pressure boundary penetrations, ring gaskets, running and testing tools and wear bushings.
The nomenclature is defined and most physical dimensions are given in USC as well as metric units.
ISO 10423:2009 defines service conditions, in terms of pressure, temperature and material class for the well-bore constituents, and operating conditions.
ISO 10423:2009 establishes requirements for five product specification levels, PSL 1, 2, 3, 3G and 4. These five PSL designations define different levels of technical quality requirements. Guidelines (not requirements) are provided for selecting an acceptable PSL.
Erdöl- und Erdgasindustrie - Bohr- und Förderausrüstung - Bohrlochkopf- und Eruptionskreuz-Ausrüstung (ISO 10423:2009)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Équipement pour têtes de puits et arbre de Noël (ISO 10423:2009)
L'ISO 10423:2009 spécifie les exigences et donne des recommandations en matière de performances, d'interchangeabilité dimensionnelle et fonctionnelle, de conception, de matériaux, d'essais, de contrôle, de soudage, de marquage, de manutention, de stockage, de transport, d'achat, de réparation et de remise à neuf des équipements pour têtes de puits et têtes de production destinés à être utilisés dans les industries du pétrole et du gaz naturel.
L'ISO 10423:2009 ne s'applique pas à l'utilisation, aux essais ou aux réparations sur le terrain des équipements pour têtes de puits et têtes de production.
L'ISO 10423:2009 est applicable aux équipements pour têtes de puits, connecteurs et accessoires, dispositifs de suspension de tubages et de tubes de production, vannes et duses, connecteurs mobiles [à brides, filetés, autres connecteurs d'extrémité (OEC) et soudés] et autres équipements, tels que: actionneurs, moyeux à colliers de serrage, pénétrations dans l'enveloppe sous pression, joints annulaires, outils de pose et d'essai, chemises d'usure amovibles.
La nomenclature est définie et la plupart des dimensions physiques sont données en unités USC ainsi qu'en unités métriques.
L'ISO 10423:2009 définit des conditions de service, en termes de pression, de température et de classe de matériaux pour les constituants des puits de forage, ainsi que des conditions opératoires.
L'ISO 10423:2009 fixe les exigences pour cinq niveaux de spécification de produits, à savoir PSL 1, 2, 3, 3G et 4. Ces cinq désignations PSL définissent différents niveaux d'exigences de qualité technique. L'Annexe A donne des recommandations (et non des exigences) relatives à la sélection d'un PSL acceptable.
Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema - Oprema za glavo izvrtine in erupcijski križ na ustjih vrtin (ISO 10423:2009)
Ta mednarodni standard opredeljuje zahteve ter podaja priporočila za delovanje, dimenzijsko in funkcionalno zamenljivost, načrtovanje, materiale, preskušanje, pregled, varjenje, označevanje, rokovanje, shranjevanje, pošiljanje, nakupovanje, popravljanje in remont opreme za glavo izvrtine in erupcijski križ na ustjih vrtin, za uporabo v industriji za predelavo nafte in zemeljskega plina. Ta mednarodni standard ne velja za uporabo in preskušanje ali popravljanje opreme na terenu za glavo izvrtine in erupcijski križ na ustjih vrtin.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2010
1DGRPHãþD
SIST EN ISO 10423:2005
Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema -
Oprema za glavo izvrtine in erupcijski križ na ustjih vrtin (ISO 10423:2009)
Petroleum and natural gas industries - Drilling and production equipment - Wellhead and
christmas tree equipment (ISO 10423:2009)
Erdöl- und Erdgasindustrie - Bohr- und Förderausrüstung - Bohrlochkopf- und
Eruptionskreuz-Ausrüstung (ISO 10423:2009)
Industries du pétrole et du gaz naturel - Équipement de forage et de production -
Équipement pour têtes de puits et arbre de Noël (ISO 10423:2009)
Ta slovenski standard je istoveten z: EN ISO 10423:2009
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 10423
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2009
ICS 75.180.10 Supersedes EN ISO 10423:2004
English Version
Petroleum and natural gas industries - Drilling and production
equipment - Wellhead and christmas tree equipment (ISO
10423:2009)
Industries du pétrole et du gaz naturel - Équipement de Erdöl- und Erdgasindustrie - Bohr- und Förderausrüstung -
forage et de production - Équipement pour têtes de puits et Bohrlochkopf- und Eruptionskreuz-Ausrüstung (ISO
arbre de Noël (ISO 10423:2009) 10423:2009)
This European Standard was approved by CEN on 18 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10423:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 10423:2009) has been prepared by Technical Committee ISO/TC 67 “Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries” in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at
the latest by June 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10423:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10423:2009 has been approved by CEN as a EN ISO 10423:2009 without any modification.
INTERNATIONAL ISO
STANDARD 10423
Fourth edition
2009-12-15
Petroleum and natural gas industries —
Drilling and production equipment —
Wellhead and christmas tree equipment
Industries du pétrole et du gaz naturel — Équipement de forage et
de production — Équipement pour têtes de puits et arbre de Noël
Reference number
ISO 10423:2009(E)
©
ISO 2009
ISO 10423:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 10423:2009(E)
Contents Page
Foreword .vi
Introduction.vii
1 Scope.1
1.1 Purpose .1
1.2 Applicability .1
1.3 Service conditions.2
1.4 Product specification levels.3
2 Normative references.6
3 Terms, definitions and abbreviated terms.8
3.1 Terms and definitions .8
3.2 Abbreviated terms .21
4 Design and performance — General requirements .21
4.1 Performance requirements — General.21
4.2 Service conditions.22
4.3 Design methods.25
4.4 Miscellaneous design information .29
4.5 Design documentation.30
4.6 Design review .30
4.7 Design validation.30
5 Materials — General requirements .30
5.1 General .30
5.2 Written specifications .31
5.3 Mandrel tubing hangers and casing hangers.31
5.4 Bodies, bonnets and end and outlet connections .35
5.5 Ring gaskets .42
5.6 Test coupons .43
5.7 Qualification test coupons .48
5.8 Heat-treating equipment qualification.50
5.9 Material qualification.50
5.10 Pressure-boundary penetrations.50
5.11 Wear bushings.51
5.12 Clamp hub-end connectors.51
6 Welding — General requirements.51
6.1 General .51
6.2 Non-pressure-containing weldments other than weld overlays — PSL 1 to PSL 3 .51
6.3 Pressure-containing fabrication weldments for bodies, bonnets, end and outlet
connections, bullplugs, valve-removal plugs and back-pressure valves .51
6.4 Pressure-containing repair weldments for bodies, bonnets, end and outlet connections,
bullplugs, valve-removal plugs and back-pressure valves.57
6.5 Weld overlay for corrosion resistance and/or hard facing and other material surface
property controls.59
7 Quality control .63
7.1 General .63
7.2 Measuring and testing equipment .63
7.3 Quality-control personnel qualifications .63
7.4 Quality control requirements .64
7.5 Quality control records requirements.104
8 Equipment marking .109
ISO 10423:2009(E)
8.1 Marking requirements .109
8.2 Wellhead equipment.111
8.3 Connectors and fittings .111
8.4 Casing and tubing hangers .111
8.5 Valves and chokes.112
8.6 Loose connectors [flanged, threaded, other end
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.