EN 13480-2:2002

Metallic industrial piping - Part 2: Materials

This part of EN 13480 covers the requirements for materials (including clad materials) for industrial piping and supports covered by EN 13480-1 constructed of metallic materials and is currently limited to steels with sufficient ductility below the creep range. It specifies the assessment of compliance for these materials. It also provides rules for the establishment of technical delivery conditions for materials for industrial piping.

Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe

Dieser Teil der EN 13480 legt die Anforderungen an Werkstoffe (einschließlich Plattierungswerkstoffe) für Rohrleitungen nach der EN 13480-1 aus metallischen Werkstoffen fest; sie ist zur Zeit auf Stähle ausreichender Duktilität begrenzt. Dieser Teil gilt nicht im Zeitstandbereich. Die Norm legt das für diese Werkstoffe anzuwendende Konformitätsbewertungsverfahren fest. Ferner enthält sie Regeln für die Festlegung von technischen Lieferbedingungen für Werkstoffe für Rohrleitungen.

Tuyauteries industrielles métalliques - Partie 2: Matériaux

La présente partie de la présente norme européenne spécifie les exigences relatives aux matériaux (y compris les matériaux métalliques plaqués) pour tuyauteries industrielles et supports fabriqués à partir de matériaux métalliques et couverts par prEN 13480-1. Elle est limitée actuellement aux aciers ayant une ductilité suffisante. La norme ne s'applique pas dans le domaine du fluage.
NOTE   D'autres matériaux seront ajoutés ultérieurement par amendements.
Elle spécifie les exigences relatives au choix, à l'inspection, au contrôle et au marquage des matériaux métalliques destinés à la fabrication des tuyauteries industrielles.

Kovinski industrijski cevovodi - 2. del: Materiali

General Information

• Status: Withdrawn
• Publication Date: 28-May-2002
• Withdrawal Date: 26-Jun-2012
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 2 - Metallic materials
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Jun-2012
• Completion Date: 27-Jun-2012
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-2:2002 - Metallic industrial piping - Part 2: Materials

Relations

• Replaced By: EN 13480-2:2012 - Metallic industrial piping - Part 2: Materials
• Effective Date: 13-Jun-2012
• Amended By: EN 13480-2:2002/A2:2010 - Metallic industrial piping - Part 2: Materials
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-2:2002/A1:2010 - Metallic industrial piping - Part 2: Materials
• Effective Date: 08-Jun-2022
• Parent: EN 13480-1:2002 - Metallic industrial piping - Part 1: General
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 2. del: MaterialiMetallische industrielle Rohrleitungen - Teil 2: WerkstoffeTuyauteries industrielles métalliques - Partie 2: MatériauxMetallic industrial piping - Part 2: Materials77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-2:2002SIST EN 13480-2:2002en01-november-2002SIST EN 13480-2:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13480-2May 2002ICS 23.040.01English versionMetallic industrial piping - Part 2: MaterialsTuyauteries industrielles métalliques - Partie 2: MatériauxMetallische industrielle Rohrleitungen - Teil 2: WerkstoffeThis European Standard was approved by CEN on 23 May 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13480-2:2002 ESIST EN 13480-2:2002

Metallic materials for industrial piping systems – grouping system and Europeanstandardized steels.14Annex B (normative)
Requirements for prevention of brittle fracture.29Annex C (normative)
Provisional technical delivery conditions for clad products for pressurepurposes.49Annex ZA (informative)
Clauses of this European Standard addressing essential safety requirements orother provisions of EU directives.53SIST EN 13480-2:2002

Part 3: Definition of parties involved.EN 10028-1, Flat products made of steels for pressure purposes – Part 1: General requirements.EN 10028-2, Flat products made of steels for pressure purposes – Part 2: Non-alloy and alloy steels with specifiedelevated temperature properties.EN 10028-3, Flat products made of steels for pressure purposes – Part 3: Weldable fine grain steels, normalized.EN 10028-4 , Flat products made of steels for pressure purposes – Part 4: Nickel alloyed steels with specified lowtemperature properties.EN 10028-5, Flat products made of steels for pressure purposes – Part 5: Weldable fine grain steels,thermomechanically rolled.EN 10028-6, Flat products made of steels for pressure purposes – Part 6: Weldable fine grain steels, quenchedand tempered.EN 10028-7, Flat products made of steels for pressure purposes – Part 7: Stainless steels.SIST EN 13480-2:2002

temperature properties.EN 12074, Welding consumables – Quality requirements for manufacture, supply and distribution of consumablesfor welding and allied processes.prEN 13479-1, Welding consumables – Test methods and quality requirements for conformity evaluation ofconsumables – Part 1: Primary methods and evaluation.EN 13480-1, Metallic industrial piping – Part 1: General.EN 13480-3:2002, Metallic industrial piping – Part 3: Design and calculation.EN 13480-4:2002, Metallic industrial piping – Part 4: Fabrication and installation.EN 13480-5:2002, Metallic industrial piping – Part 5: Inspection and testing.EN ISO 2566-1, Steel – Conversion of elongation values – Part 1: Carbon and low alloy steels (ISO 2566-1:1984).EN ISO 2566-2, Steel – Conversion of elongation values – Part 2: Austenitic steels (ISO 2566-2:1984).CR ISO 15608, Welding – Guidelines for a metallic material grouping system (ISO/TR 15608:2000).3 Terms, definitions, symbols and units3.1 Terms and definitionsFor the purposes of this Part of this European Standard the terms and definitions given in EN 13480-1, EN 764-3, andthe following definitions apply.SIST EN 13480-2:2002
...