EN ISO 16426:2002

Fasteners - Quality assurance system (ISO 16426:2002)

ISO 16426 specifies requirements for a fastener quality assurance system to be met by the fastener manufacturers and distributors. These requirements are intended to reduce or prevent the production of non-conforming fasteners with the objective of approaching zero defects for the characteristics specified.
This International Standard outlines the requirements from receipt of raw material through the manufacturing process to delivery at the distributor or the user, who is the installer.

Verbindungselemente - Qualitätssicherungssystem (ISO 16426:2002)

Diese Internationale Norm legt Anforderungen an ein Qualitätssicherungssystem fest, die von den Herstellern und Vertreibern von Verbindungselementen erfüllt werden müssen. Diese Anforderungen sind dazu vorgesehen, die Fertigung von fehlerhaften Verbindungselementen zu verringern oder zu verhindern, mit dem Ziel, sich dem Zustand "Null-Mängel" für festgelegte Eigenschaften anzunähern.
Diese Internationale Norm legt die Anforderungen von der Übernahme des Ausgangswerkstoffes über den Herstellungsprozess bis zur Lieferung an den Vertreiber oder den Verbraucher, der die Verbindungselemente montiert, fest.

Eléments de fixation - Système d'assurance qualité (ISO 16426:2002)

L'ISO 16426:2002 spécifie les exigences auxquelles doivent répondre le fabricant d'éléments de fixation mécaniques et les distributeurs. Ces exigences en système d'assurance qualité visent à réduire ou à empêcher la production d'éléments de fixation non conformes, et ont pour objectif de s'approcher du zéro défaut en ce qui a trait aux caractéristiques spécifiées.
L'ISO 16426:2002 fixe les exigences à partir de la réception de la matière première en passant par le processus de fabrication jusqu'à la livraison au distributeur ou à l'utilisateur, qui est l'installateur.

Mehanski vezni elementi - Sistem zagotavljanja kakovosti (ISO 16426:2002)

General Information

• Status: Published
• Publication Date: 14-Nov-2002
• ICS: 21.060.01 - Fasteners in general
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 04-Feb-2008
• Completion Date: 04-Feb-2008
• Ref Project: SIST EN ISO 16426:2003 - Fasteners - Quality assurance system (ISO 16426:2002)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16426:2003
01-julij-2003
Mehanski vezni elementi - Sistem zagotavljanja kakovosti (ISO 16426:2002)
Fasteners - Quality assurance system (ISO 16426:2002)
Verbindungselemente - Qualitätssicherungssystem (ISO 16426:2002)
Eléments de fixation - Systeme d'assurance qualité (ISO 16426:2002)
Ta slovenski standard je istoveten z: EN ISO 16426:2002
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
21.060.01 Vezni elementi na splošno Fasteners in general
SIST EN ISO 16426:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16426:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 16426:2003
EUROPEAN STANDARD
EN ISO 16426
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2002
ICS 21.060.01
English version
Fasteners - Quality assurance system (ISO 16426:2002)
Eléments de fixation - Système d'assurance qualité (ISO Verbindungselemente - Qualitätssicherungssystem (ISO
16426:2002) 16426:2002)
This European Standard was approved by CEN on 15 October 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16426:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16426:2003
EN ISO 16426:2002 (E)
CORRECTED  2003-02-05
Foreword
This document (EN ISO 16426:2002) has been prepared by Technical Committee ISO/TC 2
"Fasteners" in collaboration with Technical Committee CEN/TC 185 "Threaded and non-
threaded mechanical fasteners and accessories", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2003, and conflicting national standards
shall be withdrawn at the latest by May 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 16426:2002 has been approved by CEN as EN ISO 16426:2002 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 16426:2003
EN ISO 16426:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 3269 2000 Fasteners - Acceptance inspection EN ISO 3269 2000
ISO 9000 2000 Quality management systems - EN ISO 9000 2000
Fundamentals and vocabulary
ISO 15330 1999 Fasteners - Preloading test for the EN ISO 15330 1999
detection of hydrogen
embrittlement - Parallel bearing
surface method
3

---------------------- Page: 5 ----------------------

SIST EN ISO 16426:2003

---------------------- Page: 6 ----------------------

SIST EN ISO 16426:2003
INTERNATIONAL ISO
STANDARD 16426
First edition
2002-11-15
Fasteners — Qu
...