iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 16758:2016/prA1:2017

(Amendment)

Curtain walling - Determination of the strength of sheared connections - Test method and requirements

Curtain walling - Determination of the strength of sheared connections - Test method and requirements

This European Standard specifies the test method to determine the bearing capacity connections between framing members of curtain walling for which the bearing capacity cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.

Vorhangfassaden - Bestimmung der Beanspruchbarkeit von auf Abscheren beanspruchten Verbindungen - Prüfverfahren und Anforderungen

Diese Europäische Norm legt Prüfverfahren zur Bestimmung der Tragfähigkeit (Grenzzustand der Tragfähigkeit und Grenzzustand der Gebrauchstauglichkeit) der Verbindungen zwischen den Rahmenprofilen der Vorhangfassade fest, die nicht nach geltenden Codes oder herkömmlichen Berechnungen, die auf der Festigkeit der Werkstoffe basieren, berechnet werden können.
Die mechanischen Leistungen der Verbindungen von Vorhangfassaden werden bereits in Übereinstimmung mit den Festlegungen nach EN 13830 bewertet. Zusätzliche Angaben zur mechanischen Leistung der Verbindungen und zu den direkten Anwendungsbereichen können nach dieser Norm bestimmt werden.

Façades rideaux - Détermination de la résistance des assemblages - Méthode d'essai et exigences

La présente Norme européenne spécifie la méthode d'essai et les exigences pour déterminer la capacité portante des assemblages entre des éléments d'ossature de façades rideaux pour lesquels elle ne peut pas être calculée selon les codes courants ou les calculs classiques basés sur la résistance des matériaux.

Obešene fasade - Ugotavljanje trdnosti strižnih spojev - Preskusna metoda in zahteve

General Information

Status
Not Published
Publication Date
10-Jun-2019
Withdrawal Date
10-Dec-2019
ICS
91.060.10 - Walls. Partitions. Facades
Technical Committee
CEN/TC 33 - Doors, windows, shutters and building hardware
Drafting Committee
CEN/TC 33/WG 6 - Curtain walling
Current Stage
4098 - Decision to abandon - Enquiry
Completion Date
06-Jun-2019
Ref Project
SIST EN 16758:2016/oprA1:2017 - Curtain walling - Determination of the strength of sheared connections - Test method and requirements

Relations

Amends
EN 16758:2016 - Curtain walling - Determination of the strength of sheared connections - Test method and requirements
Effective Date
08-Jun-2022

Buy Standard

EN 16758:2016/oprA1:2017 - BARVEEN 16758:2016/oprA1:2017 - BARVE
PreviousNext
Draft
EN 16758:2016/oprA1:2017 - BARVE
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2017
Obešene fasade - Ugotavljanje trdnosti strižnih spojev - Preskusna metoda in
zahteve
Curtain walling - Determination of the strength of sheared connections - Test method and
requirements
Vorhangfassaden - Bestimmung der Beanspruchbarkeit von auf Abscheren
beanspruchten Verbindungen - Prüfverfahren und Anforderungen
Façades rideaux - Détermination de la résistance des assemblages - Méthode d'essai et
exigences
Ta slovenski standard je istoveten z: EN 16758:2016/prA1:2017
ICS:
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 16758:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2017
ICS 91.060.10
English Version
Curtain walling - Determination of the strength of sheared
connections - Test method and requirements
Façades rideaux - Détermination de la résistance des Vorhangfassaden - Bestimmung der
assemblages - Méthode d'essai et exigences Beanspruchbarkeit von auf Abscheren beanspruchten
Verbindungen - Prüfverfahren und Anforderungen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

This draft amendment A1, if approved, will modify the European Standard EN 16758:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13116:2024(Main)
Curtain walling - Resistance to wind load - Performance requirements
SIST EN 13116:2024

This document specifies the structural performance requirements of curtain walling under wind load, both its fixed and openable parts, under positive and negative static air pressure.
This document applies to any curtain walling product as defined in EN 13830.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12153:2023(Main)
Curtain walling - Air permeability - Test method
SIST EN 12153:2023

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
This document applies to any curtain walling product as defined in EN 13830.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12152:2023(Main)
Curtain walling - Air permeability - Performance requirements and classification
SIST EN 12152:2023

This document specifies requirements and classification of air permeability of both fixed and openable parts of curtain walling, under positive and negative static air pressure.
This document applies to curtain walling as specified in EN 13830.
NOTE   This version of EN 12152:2023 will supersede EN 12152:2002. Existing test results according to EN 12152:2002 could be considered still valid compared with this version of EN 12152.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14024:2023(Main)
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
SIST EN 14024:2023

This document specifies requirements for assessment of the mechanical strength of metal profiles incorporating a thermal barrier having mechanical performance depending on their intended use.
It also specifies the tests to determine the characteristic values of mechanical properties of the thermal barrier profile and to assess the effect of different conditionings of the thermal barrier on the mechanical performance of the connection.
This document does not apply to thermal barriers which do not give a contribution to the mechanical resistance of the profiles.
This document is applicable to thermal barrier profiles designed mainly for windows, doors, screens and curtain walls.
This document does not apply to thermal barriers made only of metal profiles connected with metal pins or screws.
This current edition of EN 14024 will supersede EN 14024:2004. Differences in test procedures between the two versions will not lead to significant differences in test results. Therefore, existing test results according to EN 14024:2004 are considered as equivalent to new test results according to the current edition of EN 14024.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13830:2015+A1:2020/AC:2022(Corrigendum)
Curtain walling - Product standard
SIST EN 13830:2015+A1:2020/AC:2022

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16758:2021(Main)
Curtain walling - Determination of the strength of shear connections - Test method and requirements
SIST EN 16758:2021

This document specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state), of connections between curtain walling framing members which cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.
Mechanical performances of the curtain walling connections are already assessed in accordance with the provisions described in EN 13830. Additional information with respect to mechanical performance of the connections and direct applications can be determined with this document (see Annex C).

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13830:2015+A1:2020(Main)
Curtain walling - Product standard
SIST EN 13830:2015+A1:2020

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17146:2018(Main)
Determination of the strength of infill supports - Test method and requirements
SIST EN 17146:2019

This document specifies test methods for the determination of the bearing capacity (ultimate limit state and serviceability limit state) of infill support which cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials or to compare the calculation when necessary.
Three different types of infill (glass) supports are dealt in this standard:
- The cantilever infill (glass) supports, see Figure 1 (a);
- The cruciform infill (glass) supports only fixed to the mullion, see Figure 1 (b);
- Corner infill (glass) supports only fixed to the mullion, see Figure 1 (c).
The test method is intended for the assessment of cantilever infill (glass) supports that have not been tested according to EN 16758 (see Figure 9). The results of the test method can only be interpreted when incorporated with the results from a test in accordance with EN 16758.
It is essential that cruciform and corner infill (glass) supports only fixed to the mullion are tested in accordance with this standard.
The infill (glass) supports connected to the mullion and the transom together are considered as a part of sheared connection and are covered by EN 16758.
Where the mechanical performances of the infill (glass) support is already assessed in accordance with the provisions described in EN 13830, additional information with respect to mechanical performance of the infill (glass) support and direct applications can be determined with this standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13119:2016(Main)
Curtain walling - Terminology
SIST EN 13119:2016

This European Standard de¬scribes terminology used in documents, drawings, specifications etc., when referring to the detailed elements of curtain wall¬ing and provides a comprehensive, though not total, list of regu¬lar terms.
It does not set out to repeat those physical definitions properly included within individual curtain walling standards related to performance requirements and associated test methods.

  • Standard
    25 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14019:2016(Main)
Curtain Walling - Impact resistance - Performance requirements
SIST EN 14019:2016

This European Standard defines performance requirements of curtain walling (excluding ‘glass in building’ which is classified under EN 12600) under soft body impact load criteria specified herein and tested in accordance with EN 13049.
Its criteria is targeted to safety in use and integrity of curtain wall in the event of sudden impact forces on the curtain wall surfaces. Compliance with the performance requirement is determined by the laboratory test.
It applies to those areas of curtain walling which face onto areas of human activity, either internally or externally and takes account of accidental impacts brought on by people going about their normal daily activities and impacts brought about by equipment and similar devices for maintenance, cleaning, repair and similar occasional activities.
It does not set out to define performance requirements of impact under exceptional circumstances such as acts of vandalism, vehicular collision, firearm projectiles, etc..
This standard will have no bearing whatsoever on any National Building / Health and Safety regulations which may exist and whose requirements shall apply separately and in parallel with these test performance requirements.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day